similar to: OpenSSH 5.1p1 - trouble connecting to ILO board

Dear All, Currently i am using HP x6600 Server and I have installed RHEL4 Update 4 AS Linux and RHEL4 Update 4 Support Cluster Suite in my server I am new in fence and can any one help me how to configure HP ILO fence in my server and HP ILO Fence Functionality Regards -S.Balaji

Hello, Has anyone managed to redirect output of kickstart install to ILO serial console? I have to test and deploy the remote install with kickstart but have trouble debugging it because I can't see the output. -- Jure Pe?ar http://jure.pecar.org

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the

I am writing a hp ilo module to automatically assign a static ip that is derived from the IP of the system which is fed in via facter. I basically just need to change the network the ilo is connected to. The ruby code works great inside the irb console. However, puppet doesn''t seem to be able to use the variable I have derived from the ipaddress. This is my first template so I am not

Due to an issue I'm having with 7.x, and trying to track it down, I spent tonight getting my server setup to allow my to break into the debugger when it hangs, and hopefully dump core ... But, although I *think* I've got it all, I'm obviously missing something, as it isn't breaking ... First ... I'm running a proliant server, and when I connect via SSH to ILO on that

Hi, With the latest FreeBSD 7.1 PRE-RELEASE, I am having trouble ssh'ing to FreeBSD 4 systems. I am getting this error: OpenSSH_5.1p1 FreeBSD-20080901, OpenSSL 0.9.8e 23 Feb 2007 debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Connection established. debug1: identity file /homes/rodrigc/.ssh/identity type -1 debug1: identity file

Hi everyone, We are recently seeing a problem with OpenSSH 5.8p1 and SSH to ILO cards running SSH-2.0-mpSSH_0.1.0. This has previously worked with OpenSSH 5.5p1 (last known version for us to work). ssh ilohost -vvv gives the following on 5.8p1: debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Applying options for *.* debug2: ssh_connect: needpriv 0

Hey, Does anyone know how I can capture both Xen & Dom0 console output on a "Virtual Serial Port" from HP''s iLO (Integrated Lights-Out) interface? Plain linux is no problem, but combined with Xen it seems to go haywire :-) So far I''ve been combining options and the only thing that actually gave me some output (albeit only the Xen console, not dom0) was this:

Just a note to pass on in case anyone runs into the same situation. I have a DELL R510 that is running just fine, up until the day that I needed to import a pool from a USB hard drive. I plug in the disk, check it with rmformat and try to import the zpool. And it sits there for practically forever, not responding. The machine still responds to network connections etc., it''s just the

Hi, On Fri, Mar 27, 2015 at 02:36:50PM +0100, Hubert Kario wrote: > > Same thing with needing sshv1 to access old network gear where even sshv1 > > was an achievement. "Throw away gear that does its job perfectly well, > > but has no sshv2 for *management*" or "keep around an ssh v1 capable > > client"? > > If you depend on hardware like this,

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP

This CAP will determine whether ARB_framebuffer_object can be enabled. The nv30 driver does not allow mixing swizzled and linear zsbuf/cbuf textures. Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- src/gallium/docs/source/screen.rst | 3 +++ src/gallium/drivers/freedreno/freedreno_screen.c | 1 + src/gallium/drivers/i915/i915_screen.c | 1 +

For the series: Reviewed-by: Marek Ol??k <marek.olsak at amd.com> Marek On Sun, Oct 13, 2013 at 3:43 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: > ping > > On Fri, Oct 4, 2013 at 4:32 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: >> This CAP will determine whether ARB_framebuffer_object can be enabled. >> The nv30 driver does not allow mixing

Hi OK another issue trying to get X going on these boxes. It seems to be a HP issue but if anyone knows a solution that would be great. I am using the iLo interface and the hpmouse-1.1.0-73.noarch.rpm driver. As root i can startx and all is well, however when starting X as the oracle user it fails with the following error Exec fail for command "/opt/hp/hpmouse/hpmouse-helper"

Hi, I have configured and installed openssh-4.5p1-chroot on my aix server 5.3-05. I am able to chroot during ssh connections but when trying to chroot an sftp connection I am getting the error below: Any ideas?, I have modified the session.c file, reconfigure and re-install without any luck. (regular sftp users are not being affected) sftp -1Cv chr at puff Connecting to puffin...

Hi , I think the question has been asked before ... but I need to be adviced on what would be the best way to import microsoft PST's into Dovecot.. ? What software can I use.. can a anyone make any recommendations? even if one has to spend some money on some commecial software.. but it has to work.. so Im looking for someone who has tried from experience as ive tried some freeware or trial

Hello all, I have set up a samba4 server with bind9 and the bind_dlz module. Everything is working as it should but now I need to allow the dhcp server to add entries to the forwarding zone. Has anybody implemented such a configuration ? Can this be done with the kerberos DNS dynamic update configuration. I want to achieve the following: 1) allow non-Windows machines (printers, ILO ...) to be

On Wed, Jun 22, 2016 at 11:08 AM, Barak Korren <bkorren at redhat.com> wrote: > > > > My question is: Is this even possible? All the documentation for HA that > I've found appears to not > > do this. Am I missing something? > > You can use oVirt for that (www.ovirt.org). > When an UNCLEAN SHUDWON happens or ifdown eth0 in node1 , can OVIRT migrate VMs

I'm getting the (unintelligible to me) error message ipmi_si: Could not set up I/O space ERST: Failed to get Error Log Address Range when I try to boot any OS on the grub menu apart from the one I last installed. (Actually, Windows also boots properly.) I wonder if anyone has had this error message, and worked out where it comes from? I googled for it, and it has come up many times; but

At my university we use HP hardware exclusively. When we build CentOS our Unix SA is running several HP utilities. I am wondering what some of these utilities are, such as cmaidad. Is it possible to to use these HP utilities to monitor for disk crashes (similar to smartd)? Is anyone using native HP utilities for this purpose? TIA