similar to: High availability www+mysql

Hi, 2 of my Centos4 servers are showing weird behavior. [root at server1 ~]# du -sh /var/ 1.8G /var/ [root at server1 ~]# df -h /var Filesystem Size Used Avail Use% Mounted on /dev/sda7 4.3G 3.9G 181M 96% /var [root at server2 var]# df -h /var Filesystem Size Used Avail Use% Mounted on /dev/sda7 2.9G 2.7G 0 100% /var [root at server2

I'm configuring a HA-cluster to share disks using heartbeat from http://www.linux-ha.org/ Two machines, lets call them server1 and server2 share the same disk with an ocfs2 file system. However, the two machines have separate disks for their OS installations. The two physical servers have two gigabit nics each and on those nics I place four virtual IP addresses which heartbeat makes sure is

Hi, right now I am using only one external server as a gateway for the internal servers. I would like to enable a fail-over on a second server. To implement the floating VIP, should I use heartbeat+pacemaker? Or is there something more "lightweight"? Basically, I just need server2 up the VIP when server1 is down, and server2 down the VIP when server1 is back up (or server 1 does not up

Hi, I'd like to put my servers' config files in cvs to make it easier to manage (yes, I know about Cfengine). I've been looking for a tutorial and I could find any, and since I'm not a CVS guru, I tried a few things, without even knowing if I'm doing it right. Any hints? Regards, -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list.

I have two samba dc's, same subnet, the goal is to have them both be able to answer domain login requests and therefore if one goes down we still have the ability to login to the domain. Can this be done with samba? if so could you just tell me generally the procedure for this? heres what I have right now. server1, openldap master, samba points to loopback for ldap server2, openldap replica,

I have two samba dc's, same subnet, the goal is to have them both be able to answer domain login requests and therefore if one goes down we still have the ability to login to the domain. Can this be done with samba? if so could you just tell me generally the procedure for this? heres what I have right now. server1, openldap master, samba points to loopback for ldap server2, openldap replica,

Hello, samba v3.0.7 on suse linux v9.1 os/2 v4.x I have started the process of replacing our os/2 hosts with linux, starting with the server(s). Most of the problems have been firewall related, a topic only briefly discussed in the docs (nudge). Some of the hosts can now interact with the linux samba shares; not all though. I have run ip traces and have gotten to a point that is a

On Wed, 22 Mar 2017 11:29:21 -0300 Edson Tadeu Almeida da Silveira <edson.tadeu at gmail.com> wrote: > Rowland i think that when i was made my changes using that wrong ldb > some problem happened between my DCs. they were working wellm but > now, when i issue this commands, the first one don´t work: > > AT DC2 (server2): > > # samba-tool drs replicate server2 server1

Hello everyone, Server1: Harmony Server2: Peace I've been using rsync 2.6.4 since some time now, without any problem. I "copy" files from Server2 to Server1 (making Server1 a mirror of Server2). The command line used on Server1 was: rsync -vrlpogt --delete-after Server2::Img/ /LocalImg I was copying files from Server2 (module Img) to Server1 (in /LocalImg). We had a problem

Helle everyone, Let's say we have 3 servers, 2 of them have the latest (stable) version of rsyncd running (2.6.9) <Server1> ==> I N T E R N E T ==> <Server2 (rsyncd running)> ==> LAN ==> <Server3 (rsyncd running)> Suppose I want to send a big file (bigfile.big) from Server1 to both Server2 and Server3. It would be a good idea to send first from Server1

Hi, I'm working with two AD servers (I was trying to setup a primary and secondary): From smb.conf: password server = server1, server2 security = ADS This is the scenario I tested and the results: ===> Start: CLDAP is sent to server1. Authentication requests (microsoft-ds) are sent to server1. ===> server1 disconnected: CLDAP is sent to server2. Authentication requests

Hello, after upgrade (Debian wheezy) from dovecot 2:2.2.13-1~auto+103 => 2:2.2.13-1~auto+113 I discovered that in my log and all mails stuck in the Queue. I?ve had downgrade v 2:2.2.13-1~auto+103 an everything is fine. What?s wrong? Any ideas or solution greatly appreciated. Thanks. Jul 25 11:03:01 server2 dovecot: lmtp(25638): Fatal: master: service(lmtp): child 25638 killed with signal

On 16.04.2015 20:32, Timo Sirainen wrote: > On 16 Apr 2015, at 19:22, Dennis Kuhn <d.kuhn at heinlein-support.de> wrote: >> >> i can't delete several folders at once. I have a folder structure like >> folder1/folder2/folder3 (we use slash as hierarchy separator). When i >> delete folder1 server1 executes the command correctly >> >> >> Apr 16

trying to get one server to mount.cifs a share on another and when it failed I used smbclient and it lead me into this oddity and I just can't seem to reason my way through. so you can skim better in case this is too much info: the mystery: why does command #3 work from server1 against itself, but fail for all other clients? server1: samba 3.4.7 (Ubuntu 10.04 server), NT4 domain member

Has anyone gotten this to work? Im studing for my rhce and was trying to get this to work and its just not working like it shows in the book im going by. So basically I have two centos 7 servers running under kvm.. One is the nfs server, one is the nfs client.. I have been mounting up other NFS shares on the client and they work fine.. The automounter also seems to mount direct mounts fine as

Good day, I've got a question regarding the usage of rsync that I just cannot figure out. I've done a fare hunt for the answer, but I'm stumped. Here is the situation. I have two pc's running linux and using rsync to perform a backup from server1 to server2. For example: rsync -avzr -e 'ssh -i/root/.ssh/id_rsa' --delete /home/samba/admin/software

perhaps a little difficult to explain - please bear with me. We use 2 icecast servers. server1 is managed by us, server2 by our service provider. Therefore it's easy to make config changes to server1, less easy for server2. I generate a stream using edcast, and send it to both servers. Sometimes I do this by creating 2 streams within edcast, sometimes I just send the stream to server2, and

Hi All! I would be grateful for clarification of my doubts about backups and restoration of the AD environment. What is the best strategy for backing up and restoring a Samba AD domain in the following scenarios: * server1 - active directory service (7 FSMO roles) * server2 - active directory service + Samba file server The considered disaster recovery scenarios are: - Corruption of the AD

Hi We have a Replica 2 + Arbiter Gluster setup with 3 nodes Server1, Server2 and Server3 where Server3 is the Arbiter node. There are several Gluster volumes ontop of that setup. They all look a bit like this: gluster volume info gv-tier1-vm-01 [...] Number of Bricks: 1 x (2 + 1) = 3 [...] Bricks: Brick1: Server1:/var/data/lv-vm-01 Brick2: Server2:/var/data/lv-vm-01 Brick3:

i can't delete several folders at once. I have a folder structure like folder1/folder2/folder3 (we use slash as hierarchy separator). When i delete folder1 server1 executes the command correctly Apr 16 13:44:28 server1 dovecot: imap(d.kuhn at heinlein-support.de): Mailbox deleted: INBOX/Trash/folder1/folder2/folder3 Apr 16 13:44:28 server1 dovecot: imap(d.kuhn at heinlein-support.de):