Displaying 20 results from an estimated 110 matches similar to: "sshd hangs"
2005 Jan 24
0
AW: sshd hangs
hello
applied the patch described below - unfortunately we still experience
rare hangs of the remote sshd. not surprising as the patch only changes
a few lines in server_loop() - but not in server_loop2() which i used
for non-interactive sessions.
process id of hanging sshd: 26110
process is sleeping forever in poll (why does server_loop2() sleep
forever?):
root at XXX:~# truss -fp 26110
26110:
2009 Mar 24
0
Issue with child process exits
I recently started building a simulator using honeyd as an IP emulator and
experienced an issue with hangs on exit from ssh and sftp sessions. A
quick look at the OpenSSH source code revealed the following:
In serverloop.c there is a signal handler defined for SIGCHLD as follows:
static void
sigchld_handler(int sig)
{
int save_errno = errno;
debug("Received SIGCHLD.");
2009 Oct 09
1
[PATCH node] validify ipv4/ipv6 static/dhcp choice else loop
If you select an option that's not listed during ipv4/ipv6 setup it will accept it without verification. This corrects that behavior and forces a valid option to be picked.
---
scripts/ovirt-config-networking | 106 +++++++++++++++++++++------------------
1 files changed, 58 insertions(+), 48 deletions(-)
diff --git a/scripts/ovirt-config-networking b/scripts/ovirt-config-networking
index
2009 Jul 13
1
[PATCH node] Adds vlan support to auto-installations for the node. bz#511056
If the vlan kernel argument is provided, then it is used during
networking auto-configuration.
Signed-off-by: Darryl L. Pierce <dpierce at redhat.com>
---
scripts/ovirt-config-networking | 56 ++++++++++++++++++++++++++++++++------
scripts/ovirt-early | 7 ++++-
2 files changed, 53 insertions(+), 10 deletions(-)
diff --git a/scripts/ovirt-config-networking
2004 May 12
2
Bad configuration option: Banner
I have been unable to use the Banner option in the sshd_config for the
verision of openssh I am using:
# ssh -V
SSH Version OpenSSH_2.1.1, protocol versions 1.5/2.0.
Compiled with SSL (0x0090704f).
Here is what I get when I have the entry "Banner /etc/issue" in the
sshd_config:
starting SSHD daemon
# /usr/local/etc/sshd_config: line 21: Bad configuration option: Banner
2009 May 22
0
[PATCH node] Restricts network configuration to a single NIC.
If an existing set of configuration files exist they are deleted. While
in the configuration menu, only one NIC is configured. If the user
selects a second network card to configure then the previous
configuration is discarded and only the new one saved.
Signed-off-by: Darryl L. Pierce <dpierce at redhat.com>
---
scripts/ovirt-config-networking | 29 ++++++++++++++++++++++++++---
1 files
2008 Sep 01
1
linebreak in mathematical anotation?
Hi
I am using mathematical anotation to make the labels in a barplot in
italics. as an example (adapted from
http://finzi.psych.upenn.edu/R/Rhelp02a/archive/129808.html):
tt <- c("italic(First~~set)", "italic(Second~~set)", "italic(third~~set")
barplot(1:3, names.arg=parse(text=tt))
But I would like to have it with "set" in a second column, like
tt
2009 Jun 25
1
[PATCH node] Rerunning network config resets all network config. bz#507393
When the user runs o-c-networking then it ensures that all features of
networking that we configure are reset and only those settings touched
are applied.
Signed-off-by: Darryl L. Pierce <dpierce at redhat.com>
---
scripts/ovirt-config-networking | 46 +++++++++++++++++++++++++-------------
1 files changed, 30 insertions(+), 16 deletions(-)
diff --git a/scripts/ovirt-config-networking
2016 Feb 16
0
[PATCH] fish: reset the console on ^Z RHBZ#1213844
Patch registers SIGTSTP hook where it sends reset terminal color
control sequence.
---
fish/fish.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/fish/fish.c b/fish/fish.c
index d26f8b3..b579898 100644
--- a/fish/fish.c
+++ b/fish/fish.c
@@ -73,6 +73,11 @@ static void cleanup_readline (void);
static char *decode_ps1 (const char
2006 Mar 03
1
Need some help with installing Samba
Hi,
I'd be grateful for some help with installing Samba 3.0.21c on Solaris 8
64-bit:
$ uname -a
SunOS aggrekodev1 5.8 Generic_117000-05 sun4u sparc SUNW,Sun-Fire-880
$
I've read the Installation and Compilation guides at samba.org, the
install chapter of
Using Samba and checked on sunmanagers but have yet to come-up with a
solution...
I seem to have two options for installation
2009 Nov 11
1
[PATCH] Static IPv4 addresses entered are validated when they're entered.
If the address is not blank then it is validated. Only those that are
properly formed are accepted. Otherwise an error message is displayed
and the user is prompted again.
Resolves: rhbz#536912 - validation for static IP should be optimized
Signed-off-by: Darryl L. Pierce <dpierce at redhat.com>
---
scripts/ovirt-config-networking | 28 +++++++++++++++++++++++++---
1 files changed, 25
2004 Apr 06
0
Accuracy Bug (PR#1228), (PR#6743)
>>>>> "daheiser" == daheiser <daheiser@gvn.net>
>>>>> on Tue, 6 Apr 2004 04:24:35 +0200 (CEST) writes:
daheiser> It is an error in the algorithm.
"it" being the behavior reported in bug report PR#1228 ---
[too bad you didn't use the whole string "PR#1228" in your subject;
if you had, no new report would have
2010 Oct 25
0
[PATCH node] add network.py script
---
scripts/network.py | 207 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 207 insertions(+), 0 deletions(-)
create mode 100644 scripts/network.py
diff --git a/scripts/network.py b/scripts/network.py
new file mode 100644
index 0000000..28e32f2
--- /dev/null
+++ b/scripts/network.py
@@ -0,0 +1,207 @@
+#!/usr/bin/python
+
+from ovirtfunctions import *
+import tempfile
2007 Apr 11
2
Patch for ini plugin
Hi,
recently I took a look at ini to find a bug which made it crash at
startup. While fixing the bug I realized I could do some improvements
to the option reading code (espacally the action part).
So I went on and here we are.
This patch should make ini more robust, clean it up and fix also some
more crashes I had here.
Additionaly, I have a attached a second patch from Maniac which should
fix
2005 Mar 17
3
Compiling "R Embedded" examples
Hi,
This question was first posted wrongly on R-help. Apologize for the inconvenience.
I am working at a major financial institution and we would like to embed R in one of our front office application.
The application is written in C/C++ so I started by trying to compile the examples in "tests/Embedding" of R 2.0.1.
I have modified "tests/Embedding/Makefile" according to
2003 Mar 26
0
Password expiry in auth-krb5.c
Due to difficulties in getting PAM (with krb5) password expiry working
consistently on multiple platforms, I'd like to see if I could hack
something into auth-krb5.c to do so.
Here's a backtrace when stopped in auth_krb5_password:
#0 auth_krb5_password (authctxt=0x8e148, password=0x90250 "XXXXXXXX") at auth-krb5.c:270
#1 0x274d8 in auth_password (authctxt=0x8e148,
2009 Jun 30
2
[PATCH node] Make all yes/no prompts consistent. rhbz#508778
Added a new function, "ask_yes_or_no", to ovirt-functions. It contains a
default prompt if none is provided.
Changed all prompts that ask for yes, no and/or abort to use this new
method.
Signed-off-by: Darryl L. Pierce <dpierce at redhat.com>
---
scripts/ovirt-config-boot-wrapper | 8 ++---
scripts/ovirt-config-collectd | 39 +++++++++++++++-----------
2013 Aug 22
0
Re: Modules in gnulib that are GPL and are used in libguestfs
How did you construct this list? It appears to list modules which are
not used by libguestfs directly or indirectly, eg (picked at random):
> avltreehash-list:31:GPL
> avltree-list:24:GPL
> avltree-oset:21:GPL
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many
2004 Jul 04
2
smooth non cumulative baseline hazard in Cox model
Hi everyone.
There's been several threads on baseline hazard in Cox model but I think
they were all on cumulative baseline hazard,
for instance
http://tolstoy.newcastle.edu.au/R/help/01a/0464.html
http://tolstoy.newcastle.edu.au/R/help/01a/0436.html
"basehaz" in package survival seems to do a cumulative hazard.
extract from the basehaz function:
sfit <- survfit(fit)
H
2013 Aug 22
2
Re: Modules in gnulib that are GPL and are used in libguestfs
after creating a git clone I executed "bootstrap" and then entered
"libguestfs/.gnulib/modules" and executed "grep -rn GPL * | grep ":GPL" |
grep -v "build tool" > ~/GPLed"
On Thu, Aug 22, 2013 at 11:05 AM, Richard W.M. Jones <rjones@redhat.com>wrote:
> How did you construct this list? It appears to list modules which are
> not