similar to: More info on 3Ware 9550SX from the field (in case anyone else is interested)

Has anyone on the list used one of these w/Linux? We currently use Linux + Cinelerra for editing uncompressed video (and a few dual G5 macs running Final Cut Pro). Current editing stations are getting a bit long in the tooth so I've been mulling over a mass upgrade. 8-) These cards are interesting to me because they are PCI-X and support 4 SATAII drives per multilane/infiniband

Hi all. We just put a relative large server in operation (for our measures ;-) ), a 4x Dual Core / Intel with 16GB Ram and a 3ware 9550SX SATA-RAID with 4 drives. Operating system for the Dom0 is an up-to-date gentoo linux. Everything runs really fine, there are 4 Domu''s running, 1x gentoo and 2x debian and 1x Windows Server 2003. DomU''s are running blazing fast in normal

Hi, I've got a new server with a 3ware 9550SXU with the Battery. I am using FreeBSD 7.0-Release (tried both 4BSD and ULE) using AMD64 and the 3ware performance for writes is just plain horrible. Something is obviously wrong but I'm not sure what. I've got a 4 disk RAID 10 array. According to 3dm2 the cache is on. I even tried setting The StorSave preference to

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough. The second one

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough. The second one

I run a decent amount of 3ware hardware, all under centos-4. There seems to be some sort of fundamental disagreement between ext3 and 3ware's hardware RAID5 mode that trashes write performance. As a representative example, one current setup is 2 9550SX-12 boards in hardware RAID5 mode (256KB stripe size) with a software RAID0 stripe on top (also 256KB chunks). bonnie++ results look

Greetings, I am looking for a hardware raid card that supports up to 4 SATA II hard disks with hot swap (compatible raid cage) I have short listed two LSI/3Ware cards: 1. 9750-4i 2. 9650SE-4LPML Both appear to be well supported in Linux. I would appreciate your personal experience with the CLI tools provided by LSI. Can they be configured to send email for disk failures or SMART errors? Is

I'm getting a couple of systems that are arriving with the new 3ware 9550sx controller. Does anyone know when this will be natively supported by CentOS? Has anyone built an RPM of the driver/module for this new controller?

3ware now provides driver disk for CentOS. A couple of months ago, I had to add support for the 3ware 9550sx. The driver disk provided for CentOS 4.1 work perfectly. I now need to add support for the 3ware 9550sx for CentOS 4.3 x64. Although the driver disk is available, it doesn't seem to work. Anaconda just can't find the 3w-9xxx module. This is the same seutp as CentOS 4.1 (which

Guys, I''m about to set up Xen on a dual Opteron server backed with SATA storage which is driven by a 3ware 9550SX controller. The problem is that as linux-2.6.12.6 has no support for this type of card by default, so I need to download & compile the driver the vendor provides. I did so (for the kernel 2.6.12.6-xen0) and generated an initrd image which gets loaded properly at bootime,

I just built up a server running CentOS 4.3, and trying to boot from a 3Ware 9550SX-16ML, 16 port card. This system has 9x500GB drives, AMD Opteron, Tyan K8SD mobo and 1 GB of ram. I downloaded the latest (9.3.0.4) driver from 3Ware, and after a couple of botched attempts, I got CentOS installed. In my two botched attempts, the problem was X hanging during the formatting of the drives, so I

Dear list, I thought I'd just share my experiences with this 3Ware card, and see if anyone might have any suggestions. System: Supermicro H8DA8 with 2 x Opteron 250 2.4GHz and 4GB RAM installed. 9550SX-8LP hosting 4x Seagate ST3250820SV 250GB in a RAID 1 plus 2 hot spare config. The array is properly initialized, write cache is on, as is queueing (and supported by the drives). StoreSave

I know there are a few 3Ware fans here and I was hoping to find some help. I just built a new server using a 3Ware 9550SX-4LP with four disks in raid 5. The array is fully initialized but I'm not getting the write performance I was hoping for -- only 40 to 45MB/Sec. 3Ware's site advertises 300MB/Sec writes using 8 disks on the PCI Express version of this card (the 9580 I think.)

I have the latest kernel with the drivers for my 3ware 9550SX built in. Where can I find the tools and monitoring apps for this card? Are there rpms hiding somewhere, or do I need to build it from source? -- Bowie

I've just noticed that 3Ware has a more current version of the firmware for the 9500S than I have on several machines. All of mine are running: 3w-9xxx: scsi0: Firmware FE9X 3.04.00.005, BIOS BE9X 3.04.00.002, Ports: 8. and the latest rev appears to be 3.08. I'm wondering if there is any compelling reason to upgrade or just let these sleeping dogs lie. :) Any sage (or other)

Anyone have any experience with these products yet? We've got one in for eval, but I thought I'd also ask for experiences here... Thanks in advance. Dave Thompson The University of Wisconsin - Madison Computer Sciences Department

Hello listmates, I would like to build a 12-15 TB RAID 5 data server to run under ContOS. Any recommendations as far as hardware, configuration, etc? Thanks. Boris.

Hi All, I am trying to add a 3Ware 9500S-8 RAID controller to a CentOS 5.4 box. I have the drivers from 3Ware and they seem to be a .ko file (which I presume is like a .kext on OSX) How do I install these? Searched turn up people talking about Kernel panics with .ko's but I dont see anything that points to to installing one so I can use the card. Best, -Jason

I'm looking to do a bit more monitoring of my 3ware 9550 with smartd, and wanted to see what others were doing with smart for monitoring 3ware hardware. Do you have the smartd.conf configured to test, or simply monitor health status? Are you monitoring the drive as centos sees it (/dev/sdX) or are you using the 3ware /dev/twaX for monitoring? Opinions and discussions are welcome :-P --

In regard of the e-mail sent on Jul/16/04 about the 3Ware 9500S. Has anyone experienced/solved this issue ?? I'm having a similar problem, I already have the system installed on a separate disk, now I want to make the filesystem on the RAID partition (using 3Ware 9500S-8). First I had the problem that the card will keep resetting after continous timeouts whenever I tried loading the