Displaying 20 results from an estimated 400 matches similar to: "make distprep broken?"
2000 Aug 28
1
PTY-Allocation under SCO 5
Hello,
I used the sshd under SCO 5, and always get the error that the deamon couldn't allcoate a pseudo tty. This depends on that SCO use a different method to create the tty's in the /dev directory. The pseudo tty line looks like:
/dev/ttypXXX where XXX depends on the number of pseudo tty's entered in the scoadmin Tool for the network interface. So I change the allocation routine in
2002 Feb 12
1
SSH Client Hangs after logging in to SSHD
I'm not a ssh expert and I don't know if the log is good or bad, but I too am
running OpenSHH under OpenServer. I find that after I connect, the return key
has no effect unless I first type:
stty sane <Ctrl>j
If you've hit <ENTER> before that you must first press <Ctrl>j a couple of times
to clean out the buffer. After I type the above command, everything
2006 Jun 20
2
[PATCH] openssh pseudo-terminal bug
hello
short description:
ssh client sends a wrong all-zero terminal info when requesting forced pseudo-terminal
allocation while stdin is not a terminal.
sshd then sets the terminals ospeed to 0 because it receives this information from the
client. on solaris this means that the pseudo-terminal is closed and output of any
remote command is dropped.
longer description:
what we're doing is
2001 Oct 31
2
OpenStep (NeXT) and TTY modes
OpenStep, apparently, does not initialize new pty/tty modes to a sane
default.
I'm thinking this code snippet, added to tty_parse_modes() before the
for(;;) loop should suffice:
#ifdef HAVE_NEXT
tio.c_oflag |= ONLCR;
tio.c_lflag |= ECHO;
#endif /* HAVE_NEXT */
Also, I've noticed that "ssh -t next_host stty" gives different output
than an interactive session to the same
2003 Sep 13
1
make install fails with current CVS due to commented out target
Solaris x86 8
autoconf 2.57
autoconf; autoheader; ./configure ....; make
all goes fine
make install fails on Ssh.bin. scard/Makefile has a commented out target
for it - is there some reason for the target being commented out?
--
Carson
2018 Feb 12
2
User manipulation of tty mode opcodes / IUTF8 incompatibilities
On Sun, Feb 11, 2018 at 11:27 PM, Darren Tucker <dtucker at dtucker.net> wrote:
> Sigh. If you could provide the server's identity string (eg from "ssh
> -v yourthing") we could add a bug bit to stop it from being sent.
$ ssh -v nathan at 10.0.0.1
OpenSSH_7.4p1, LibreSSL 2.5.0
[snip]
debug1: Local version string SSH-2.0-OpenSSH_7.4
debug1: Remote protocol version
2015 Jul 06
3
Prompt for chrooted users
We have a requirement to allow ssh access to a server in order to
provide a secure link to one of our legacy systems. I would like to
chroot these accounts.
I have this working except for one small detail, the user's prompt in
the ssh session. Each user has their shell set to /bin/bash in
/etc/passwd. However, instead of getting the prompt defined in their
.bash_profiles we see this:
2010 Mar 27
1
Syslinux-4/libutil: console_ansi_std()
Well, I decided to get ROSH back out and try to get it functioning in
Syslinux-4. As has been my habit, I first recompiled the Linux binary
and tried it out. In the beginning of ROSH, it calls
console_ansi_std(). When I was working on this in the past, using
this function ensured both the Linux and the Syslinux/COM32 binaries
function similarly.
When using fgets() to get an input string in the
2010 Jan 28
31
[PATCH 0 of 4] aio event fd support to blktap2
Get blktap2 running on pvops.
This mainly adds eventfd support to the userland code. Based on some
prior cleanup to tapdisk-queue and the server object. We had most of
that in XenServer for a while, so I kept it stacked.
1. Clean up IPC and AIO init in tapdisk-server.
[I think tapdisk-ipc in blktap2 is basically obsolete.
Pending a later patch to remove it?]
2. Split tapdisk-queue into
2006 Jun 26
2
[Bug 1202] Missing instructions for building from CVS
http://bugzilla.mindrot.org/show_bug.cgi?id=1202
Summary: Missing instructions for building from CVS
Product: Portable OpenSSH
Version: 4.3p2
Platform: Other
URL: http://openssh.org/portable.html
OS/Version: All
Status: NEW
Severity: normal
Priority: P2
Component: Documentation
2006 Sep 09
2
Make Install Failed for 4.4p1 on FC4
Hi,
I tried to build the CVS snapshot for OpenSSH 4.4p1 dated 9/08/06. Make install failed on Fedora Core 4 system with the following errors:
[root at fedora4 openssh]# make install
\if test ! -z ""; then \
/usr/bin/perl ./fixprogs ssh_prng_cmds ; \
fi
(cd openbsd-compat && make)
make[1]: Entering directory `/usr/local/openssh/openbsd-compat'
make[1]: Nothing to be
2009 Apr 07
2
Portable OpenSSH CVS install error
Hi,
I did a CVS checkout this morning to patch sftp.c for Jon Grant's
recent sftp request, but there seems to be an install problem on
Mac OS X 10.5.6 possibly caused by recent changes to configure.ac.
For example (most output pruned):
% ident configure.ac
configure.ac:
$Id: configure.ac,v 1.419 2009/03/18 18:25:02 tim Exp $
$Revision: 1.419 $
% autoreconf
% ./configure
% make
gcc
2001 Oct 12
2
bug report: last login time vs PAM in portability release
on hp-ux 11 i see:
$ date;ssh jenny
Fri Oct 12 14:44:13 PDT 2001
Last successful login for stevesk: Fri Oct 12 10:45:42 PST8PDT 2001 on pts/2
Last unsuccessful login for stevesk: Mon Sep 24 22:55:53 PST8PDT 2001
Last login: Fri Oct 12 10:45:43 2001 from 172.31.1.53
You have mail.
so solaris PAM is different. can other solaris+PAM users confirm this?
On Fri, 12 Oct 2001, Benn Oshrin wrote:
2014 Oct 22
5
Q. LUKS or ecryptfs-utils ?
I am now investigating encrypting our IMAP user spool files. Does anyone have
experience with handling encrypted data stores using either or both of the
subject methods and would care tio share their observations? Which is the
preferred method (I know: it depends, but on what?)? What administrative
pain does each cause?
Our IMAP host is a KVM guest so spinning up a duplicate and simply
2012 Jun 16
4
Failing to start or create VM, cannot connect to hypervisor host
Greetings -
I shutdown one of my Centos 6.2 VMs for some offline maintenance and am
now unable to get it to restart. I am also unable to create and start a
new VM. The host system is Centos 6.2, fully up to date. I have been
searching Google for two days and have not been successful in getting a VM
to start. I have restarted libvirtd, but did not want to shutdown my
other two running VMs and
2002 Aug 28
5
Tru64 privsep patch testing
OK, I got a chance to try out the Tru64 patch for privsep. I applied the patch
to 3.4p1. Partial success, in that it now works for me for logins to "root".
Logins to ordinary accounts fail after authentication, when trying to set tty
characteristics. See the excerpt from the debug messages below. This is for
Tru64 V4.0F (with enhanced_security turned on, obviously.) I guess it's time
2002 Jun 07
4
openssh for UWIN
I am enclosing a context diff of the changes that I made to get
openssh working on UWIN. UWIN is a UNIX operating system layer
that runs on Win32 systems. For more information on UWIN
go to http://www.research.att.com/sw/tools/uwin/.
I also ran configure using -with-cppflags=-D_BSDCOMP=2. I don't
know where that information would go with the source code.
Let me know if you need more
2001 Jan 31
1
PTY
environment
1)compiler: cc -v
Reading specs from /usr/lib/gcc-lib/i386-slackware-linux/2.95.2/specs
gcc version 2.95.2 19991024 (release)
2)openssh: CVS from 31 jan 2001
3)libc: GNU libc 2.2.1
output form make pty.o is:
#make pty.o
gcc -g -O2 -Wall -I/usr/local/ssl/include -I. -I. -DETCDIR=\"/etc\"
-D_PATH_SSH_PROGRAM=\"/usr/bin/ssh\"
2002 Mar 13
1
Problem with buildpkg.sh
I am attempting to successfully run the buildpkg.sh script which is located
in the contrib/solaris directory. I am receiving the following error:
Building pkginfo file...
Building prototype file...
Building package..
## Building pkgmap from package prototype file.
## Processing pkginfo file.
pkgmk: ERROR: parameter <VERSION> cannot be null
## Packaging was not successful.
pkgtrans: ERROR:
2002 Sep 30
1
Snapshots: run autoconf before creating tarballs?
Would it be possible to run autoconf (or make -f Makefile distprep)
before creating the snapshot tarballs? It would make it easier for
people to use (mainly, they wouldn't have to get/install/run autoconf
and GNU m4).
--
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4 37C9 C982 80C7 8FF4 FA69
Good judgement comes with experience. Unfortunately, the