similar to: OpenSSH 2.9.2p2 passwd work but not publickey on HPUX 11

Hi, I am running sshd (openssh-2.9p2) on a power-pc LynxOS box, and am connecting from a ssh client (openssh-2.9p2) on an x86 Linux box. This works fine for ssh protocol version 1, but am getting the below error for ssh v2: Disconnecting: Bad packet length -857542839. I am also attaching the complete debug traces from sshd & ssh below. I am not sure if this is an "endian" issue.

Hello, I believe I may have discovered what appears to be a small anomoly in the way OpenSSH closes connections and thought if I gave you some feedback I might be able to make a very small contributution to the development of openssh. This might be a Solaris 2.6 anomoly or an openssh anomoly or a combination of both. I came across this apparent anomoly because we use openssh (via cron) here to

dear sir, i encountered something very odd with openssh. when i try to connect to my sshd daemon, i get repeated password errors. this happens on all connections to my server. outbound connections to other ssh sites work with no problem. the remote site can connect to itself, but not to my site. i captured the output of the sshd -d -d -d -e -D command to provide you with some trace data. i

Markus Friedl wrote: > > ?'m not sure where the 'bug' is and whether this is 'really' a bug. > > try to talk to the openssh-unix-dev list, i'm too busy right now :( > > -m > > On Thu, Aug 16, 2001 at 03:51:19PM +0100, Mark Reardon wrote: > > Hello Markus, > > > > I recently posted you with a mention of the 2.9p2 possible problem

Hi, I just grabed the 2.9p2 and can't forward X11 connections. This worked fine for me under 2.9p1 but with 2.9p2 it seems that $XAUTHORITY isn't getting set and when I try and set it manually connections to the Xserver still fail with: debug1: X11 connection uses different authentication protocol. debug1: X11 rejected 1 i1/o16 Verbose debugs below. client: OpenSSH_2.9p1, SSH

Hi, I have installed OpenSSH 2.9p2 on Linux Redhat 7.0 with PAM support and using pam_radius_auth to authenticate of a radius server also running Redhat, My problem is that the request goes via the radius server fine and sends back a rad.accept to the pam module but ssh refuses to let me in, it looks like sometihng to do with rhosts but complains very loud about expired accounts. I've looked

When I run a remote xterm, the ssh hangs even after I quit the xterm. Below is the output for the following sequence: client> ssh -v -v -v dazel xterm xterm> exit client> ^C The outcome is always the same - the ssh doesn't exit with I quit the xterm... I have to hit CTRL-C on the client side. polycut:~> ssh -v -v -v dazel xterm OpenSSH_2.9p2, SSH protocols 1.5/2.0, OpenSSL

http://bugzilla.mindrot.org/show_bug.cgi?id=502 Summary: sshd fails when "Compression yes" set on HPUX Product: Portable OpenSSH Version: 3.5p1 Platform: HPPA OS/Version: HP-UX Status: NEW Severity: normal Priority: P2 Component: sshd AssignedTo: openssh-unix-dev at mindrot.org

Thread split from my previous communication. Here is the integrity logs on the platform. I had to cut this should due to the length of the logs (5Mb). ***************** failed-regress.log ************ trace: test integrity: hmac-sha1 @2900 FAIL: unexpected error mac hmac-sha1 at 2900: Bytes per second: sent 65665.7, received 55994.0. trace: test integrity: hmac-sha1 @2901 FAIL:

Hello developers, some informations before I come to the problem: At work we're using Open-SSH 3.4p1 under Solaris 8. I compiled the Open-SSH by myself with gcc-3.1. In the gcc is the bounds checking patch included (http://web.inter.nl.net/hcc/Haj.Ten.Brugge/bounds-checking-gcc-3.1-1.01.patch.bz2). With this patch I compiled: - prngd 0.9.25 - zlib 1.1.4 - Open-SSL 0.9.6d Everything

Team - I'm running Solaris 9 and gcc 3.1 on a Blade 1000, named jefferson. I built OpenSSH_3.3. I can use the client to connect out, but cannot use the client to connect to localhost (nor can I use a Linux box with OpenSSH_3.2.3 to connect to it). I *can* use F-Secure 3.0.0 on a Windoze box to get into it. I've tried configurations both with and without privsep enabled but get the same

Hi there, I have a weird problem with OpenSSH 2.9.9p2 on Solaris 8. Whenever I try to use ssh, scp or sftp to connect to the Solaris box, the connection is closed by the server and the following msg logged thru syslog: "sshd[542]: fatal: buffer_get: trying to get more bytes 129 than in buffer 39" I tried from an RH 7.1 client (2.9.9p2), from a Solaris 8 client (2.9.9p2), and an OpenBSD

5.1p1 disconnects after the password prompt when connecting to my router and UPS. 5.1p1 connects fine to other unix hosts, and my Windows client connects fine to 5.1p1 servers. 5.0p1 works fine everywhere. I've tried ssh -T, ssh -t, permutations with ssh -o Compression=no -o TCPKeepAlive=no, etc, to no avail. I've used the default ssh_config file, and it still fails. Can anyone

Just upgraded to OpenSSH_6.4 with OpenSSL 1.0.1e and libz.so.1.2.8. Now some (but not all) Cisco router logins hang: kraken> ssh -vv -l noc XXX-mgmt.gw OpenSSH_6.4, OpenSSL 1.0.1e 11 Feb 2013 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 50: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to XXX-mgmt.gw [10.12.0.1] port 22.

Hello, I recently compiled OpenSSH 4.0p1 with OpenSSL 0.9.7g on my Linux 2.6.11.3 machine. When I try to connect, the connection is immediately closed. When I setup public key authentication, I am able to login using my public key. However password authentication seems to be ignored. I attached debugging output from both the server and client. $ ssh -vvv localhost OpenSSH_4.0p1, OpenSSL 0.9.7g

Both systems are running RH 7.3 with a compiled copy of 3.4p1 with pam support enabled via configure root at vlan root]# ssh -v -v -v root at 207.62.147.3 OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f debug1: Reading configuration data /usr/local/etc/ssh_config debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1:

I'm using an OpenBSD 2.9 snapshot on i386. "ssh -V" reveals OpenSSH_2.9, yada yada. I generated a keypair using ssh-keygen and accepting defaults. I copied the public key to another box, stuck it in ~/.ssh/authorized_keys with host restriction and then tried to use it. Failed. Removed the host restriction, still failed. Just get asked for password. So I cut out the extra box.

Hi guys, I have a OpenSSH 3.4p1 installation on a SourceMage box, and I am trying to connect to a OpenSSH 3.3p1 installation on a RedHat 7.x box and any other machine. The client fails with a "Host key verification failed." Any other client connects correctly to the RedHat box, and any other server that I try to connect to from the SourceMage box fails with the same error message.

Hi :-) When i use scp or sftp with password login, it dont com back fbeckman at zvadm6:/home/fbeckman $ scp /etc/hosts root at devil3:/var/tmp/ Password: hosts 100% 283KB 283.4KB/s 00:00 .... <sleep> ^CKilled by signal 2. fbeckman at zvadm6:/home/fbeckman $ Only Ctrl C helps Exsample 2: ssh devil3

http://bugzilla.mindrot.org/show_bug.cgi?id=905 Summary: scp exit status is -1 instead of 0 Product: Portable OpenSSH Version: 3.8.1p1 Platform: ix86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: scp AssignedTo: openssh-bugs at mindrot.org ReportedBy: maik at