similar to: Antw: problem with installing openssh on HP/UX

Hi, thanks for your answer. I can reproduce your error in my HP-UX system and solved it ;-)). I built socalled software-depots for distributing the openssh-package and put the start command in the postinstall-script. The shell of this postinstall script has the bahavior that intr ^C won't work properly. So I did your trick with "/sbin/init.d/sshd stop/start" from a shell where ^C

Hi Ryan, I run into the same problem with my HP-UX 11 as well as HP-UX 10.20 boxes. Therefore I decided not to start the sshd from the swagent in the postinstall script. I start the daemon via the lan console by hand. I know in large environments it is not a perfect solution but the only one which works these days ;-(( regards Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471

Hi Kyle, I've compiled 2.9p2 on HP-UX 11.00 with gcc-3.0.0 als well as 2.95.2 and openssl-0.9.6 and got _no_ problems. I took the openssh-package from the porting center. Some month ago I got some errors with the commercial c-compiler from HP but going back to gcc solve them. Hope that helps Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax: +49-(0)331-27548 1187

Hi, I am trying to install openssh on an HP: acro-284> uname -a HP-UX niit1 A.09.01 A 9000/730 2015353714 two-user license There were a couple of problems during compiling: 1. The system doesn't have seteuid or setreuid. It has setresuid. I had to define HAVE_SETREUID and modify bsd-misc.c to be: #if !defined(HAVE_SETEUID) && defined(HAVE_SETREUID) int seteuid(uid_t euid) { /*

Hi, just a few days ago I upgraded to openssh-2.3.0p1 on HP-UX 11.00, trusted system, incl. the PAM-patch PHCO_22265 and I run into another problem. The situation is the following. I come from server inside a firewall and go through the firewall wia a ssh-plug-gateway to one host in our internet section and further do a second server in the internet section. All this including the ssh-agent

Hi list, I tried sftp and it works perfect via a direct connection between 2 hosts. Our situation is that we have to go from our intranet through a firewall gateway to the internet and then to a third server. With "normal" ssh this works via: "ssh -t hosta ssh hostb". It seems to me that this doesn't work with sftp ;-((. Would it be complicate to implement? Thanks Stephan

Hello all, are there any issues concerning ocfs2 (v 1.2.3) and device-mapper-multipath-0.4.5-12.0.RHEL4? I've build a 4 node cluster with two ocfs2 mounts on /dev/dm-0 and /dev/dm-1. Under heavy load the nodes dies after about two minutes reproducably ;-(( Once I've loaded the ocfs2 modules it seems to me that both modules (device-mapper-multipath related as well as ocfs related) are

Hi all, I found that on some HP-UX 11 machines running openssh-2.3.0p1 the default values for intr in stty don't work. The problem is that stty shows the correct values but they don' work and I cannot det the values to others. Once I connect via telnet or rlogin I can use the intr-sequence. Any ideas? Thanks Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax:

Hello, I just upgraded one machine (HP-UX 11.0) from 2.5.1p2 to 2.9p2 and found that a hendl at host_a# ssh host_b works fine with authentication agent and X11 forwarding on but a hendl at host_b# su root at host_b# /usr/bin/X11/xclock afterwards gives errors like debug: X11 connection uses different authentication protocol. debug: X11 rejected 0 i1/o16 ... debug: X11 connection to ...

Hi all, just I tried to upgrade openssh from 3.5p1 to 3.6.1p2 on Reliant Unix 5.45 and run into this error: root at soltest: tail /var/adm/log/messages .... May 23 15:45:28 soltest unix: sshd[4013]: Accepted password for root from 10.128.11.72 port 2624 ssh2 May 23 15:45:28 soltest unix: sshd[4101]: error: setsid: Not owner May 23 15:45:28 soltest unix: sshd[4101]: error: open /dev/tty failed -

Hi all, I try to implement a secure ODBC connection via ssh tunnel from a win-pc to a linux server. I am looking for a kind of service under nt that builds a secure tunnel connection from the pc to the server at time of login of the user at the desktop and going into the background after that. That means the conncetion is always open until the user shuts down the pc. It should run completely in

Hi all, just I installed OpenSSH 2.2.0p1 on a HPUX-11 machine and it works. But when I connected to the machine and give "finger -R"-command then in the "Where"-column I see the hostname of the openssh-server instead of the hostname where I came from. Does anybody have an idea? Thanks Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax:

Hi, is it possible to have only _one_ openssh binary distribution (it means compiled by myself) wich recongnizes itself wether there is an trusted system or not? With the commerfial stuff I have to build to variants dependeing on the security mode - but this is quite not friendly for admins. Regards Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax: +49-(0)331-27548 1187

Hi all, I just want to upgrade from protocol 1.5 to 1.99 and 2.0, respectively and run into the following problems: The situation is the following: I have a client ("c") inside the firewall and two servers outside ("a" and "b"). The firewall accepts connections on two ports (22136 and 22137) and directs the connections directly to port 22 of the two servers

Hi all, I tried to use the ProxyCommand option in the ~/.ssh/config file like ProxyCommand /usr/local/bin/corkscrew <firewall> 80 %h %p but it seems th me that the ssh clinet won't use the option .. How can I tell the client to accept the proxy an send all requests to this host, bcause the internet names ("%P") cannot be resolved inside our lan - this must do the proxy.

Hi all, I get some problems using scp (ssh1) with authentication via the authetication agent mechanism on HP-UX 11. I have to distribute some files step by step from one machine to several others. 1. After approximately 10 scp processes the conncetion to the authetication agent breaks and the socket doesn't work for this session anymore. That means I have to log off and log on once again,

Hi all, I am looking for a chroot-patch like it was available for the 3.5p1 version. Does anybody has such a patch? Because chroot doesn't work with 3.6.1p1 under Reliant Unix 5.45 from Fujitsu-Siemens. regards Stephan Dr. Stephan Hendl Systemmanagement ----------------------------------- Landesbetrieb f?r Datenverarbeitung und Statistik Land Brandenburg Adresse: 14467 Potsdam, Dortustr.

Hi Group, recently I upgraded to v 3.7.1p2 on Reliant Unix (former SINIX). With sser root everything works fine, but with a "normal" user the session terminates.. I put the logfile of the "sshd -dddd" at the end. What is wrong? regard Stephan --------------- debug2: read_server_config: filename /etc/sshd_config debug1: sshd version OpenSSH_3.7.1p2 debug1: private host key:

Hi, I am sorry about this stupid question but after compilation of openssh-2.3.0p1 the manpages were installed but a man ssh gives only unstructured response without underlined lines etc. A nroff -man sshd.8 gives the same output but the contents of the file shows a nroff-format. Any ideas? My system is a HP-UX 11.000 with the pam-patch. regards Stephan -- LDS Brandenburg Dr. Stephan Hendl

Dear all, > Caveats > ======= > Features which OCFS2 does not support yet: > - extended attributes > - readonly mount > - shared writeable mmap > - loopback is supported, but data written will not > be cluster coherent. > - quotas > - cluster aware flock <---------------------------------------- >