similar to: PAM auth. and HP-UX

Hi all, just I tried to upgrade openssh from 3.5p1 to 3.6.1p2 on Reliant Unix 5.45 and run into this error: root at soltest: tail /var/adm/log/messages .... May 23 15:45:28 soltest unix: sshd[4013]: Accepted password for root from 10.128.11.72 port 2624 ssh2 May 23 15:45:28 soltest unix: sshd[4101]: error: setsid: Not owner May 23 15:45:28 soltest unix: sshd[4101]: error: open /dev/tty failed -

Hi list, I tried sftp and it works perfect via a direct connection between 2 hosts. Our situation is that we have to go from our intranet through a firewall gateway to the internet and then to a third server. With "normal" ssh this works via: "ssh -t hosta ssh hostb". It seems to me that this doesn't work with sftp ;-((. Would it be complicate to implement? Thanks Stephan

Hello all, are there any issues concerning ocfs2 (v 1.2.3) and device-mapper-multipath-0.4.5-12.0.RHEL4? I've build a 4 node cluster with two ocfs2 mounts on /dev/dm-0 and /dev/dm-1. Under heavy load the nodes dies after about two minutes reproducably ;-(( Once I've loaded the ocfs2 modules it seems to me that both modules (device-mapper-multipath related as well as ocfs related) are

Hi all, I found that on some HP-UX 11 machines running openssh-2.3.0p1 the default values for intr in stty don't work. The problem is that stty shows the correct values but they don' work and I cannot det the values to others. Once I connect via telnet or rlogin I can use the intr-sequence. Any ideas? Thanks Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax:

Hi, I am sorry about this stupid question but after compilation of openssh-2.3.0p1 the manpages were installed but a man ssh gives only unstructured response without underlined lines etc. A nroff -man sshd.8 gives the same output but the contents of the file shows a nroff-format. Any ideas? My system is a HP-UX 11.000 with the pam-patch. regards Stephan -- LDS Brandenburg Dr. Stephan Hendl

Hello, I just upgraded one machine (HP-UX 11.0) from 2.5.1p2 to 2.9p2 and found that a hendl at host_a# ssh host_b works fine with authentication agent and X11 forwarding on but a hendl at host_b# su root at host_b# /usr/bin/X11/xclock afterwards gives errors like debug: X11 connection uses different authentication protocol. debug: X11 rejected 0 i1/o16 ... debug: X11 connection to ...

Hi Group, recently I upgraded to v 3.7.1p2 on Reliant Unix (former SINIX). With sser root everything works fine, but with a "normal" user the session terminates.. I put the logfile of the "sshd -dddd" at the end. What is wrong? regard Stephan --------------- debug2: read_server_config: filename /etc/sshd_config debug1: sshd version OpenSSH_3.7.1p2 debug1: private host key:

Hi, does anybody know wether samba is running on an IBM mainframe under os/390? Are there any specific things to consider or do it just like for a "normal" unix? thanks Stephan Hendl -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 EMail: stehan.hendl@lds.brandenburg.de

Hi all, I try to implement a secure ODBC connection via ssh tunnel from a win-pc to a linux server. I am looking for a kind of service under nt that builds a secure tunnel connection from the pc to the server at time of login of the user at the desktop and going into the background after that. That means the conncetion is always open until the user shuts down the pc. It should run completely in

Hi all, just I installed OpenSSH 2.2.0p1 on a HPUX-11 machine and it works. But when I connected to the machine and give "finger -R"-command then in the "Where"-column I see the hostname of the openssh-server instead of the hostname where I came from. Does anybody have an idea? Thanks Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax:

Hi, is it possible to have only _one_ openssh binary distribution (it means compiled by myself) wich recongnizes itself wether there is an trusted system or not? With the commerfial stuff I have to build to variants dependeing on the security mode - but this is quite not friendly for admins. Regards Stephan -- LDS Brandenburg Dr. Stephan Hendl fon: +49-(0)331-39 471 fax: +49-(0)331-27548 1187

Hi all, I just want to upgrade from protocol 1.5 to 1.99 and 2.0, respectively and run into the following problems: The situation is the following: I have a client ("c") inside the firewall and two servers outside ("a" and "b"). The firewall accepts connections on two ports (22136 and 22137) and directs the connections directly to port 22 of the two servers

Hi all, I tried to use the ProxyCommand option in the ~/.ssh/config file like ProxyCommand /usr/local/bin/corkscrew <firewall> 80 %h %p but it seems th me that the ssh clinet won't use the option .. How can I tell the client to accept the proxy an send all requests to this host, bcause the internet names ("%P") cannot be resolved inside our lan - this must do the proxy.

Hi all, I try to login from a Linux Box with ssh-1.2.27 to an HP-UX Server with openssh-2.3.0p1 using PAM. After a couple of login the HP-UX disables my account with the error message: Too many unsuccesful logins. It seems to me - and the logfile says it too - that the first attemt to authenticate myself via Password fails and the second attempt via rsa-key works. Now the counter of unsuccesful

Patch PHCO_22265 (s700_800 11.00 cumulative libpam and libpam_unix patch) is now available that fixes a problem discussed a while back on the list regarding an incorrect return value from pam_acct_mgmt(), which effected the ability to change an expired password: (SR: 8606160402 CR: JAGad29724) HP-UX is inconsistent with the PAM standard with respect to the return value for

Hi folks, I tried to use WinSCP (http://winscp.vse.cz/eng/) for a ftp like scp-GUI for Windows in order to connect to a HP-UX machine running 11.0 and openssh-2.5.1p2. The problem is that I can connect to any user I want _except_ root! When I connect to root, then the command "echo $status" (this is the way how WinSCP detects the user shell) results in a "logout root". The

On Mon, 18 Jan 1999 <Stephan.Hendl@mpz-brandenburg.nubb.dfn.de> wrote: >hi anybody, >I just upgraded to the final release 2.0.0 and got some problems. >I the [homes]-section I have to set "writable = Yes" in order to get >write access to my home-directory. Unfortunately this allows me to >delete a file that was created originally by root. But this is not

Hi folks, just I installed openssh 2.1.1p4 on a sco OpenServer 5.0.5 machine and it works fine. The only problem I have is the X11 forwarding. I have allowed this feature in the /etc/sshd_config and the /etc/ssh_config, respectively and the /usr/bin/X11/xauth program was in the PATH during compilation. As you can see in the logfile the sco system enables the X11 forwarding and sets the DISPLAY

Dear, I'm trying to put up a scripts to synchronize my computers (HOST_A and HOST_C). I can connect both via HOST_B to avoid the firewall. I am trying to work with the rsync daemon to avoid hanging. I tried to figure out the mailinglist + FAQ, how to do it, but it seems I misunderstand something, since all your previous help did not work for me. I get the following error when executing

TLDR: Why is virsh migrate --persistent --live domain qemu+ssh://root@host/system --xml domain.ceph.xml not persistent and what could i do about it? Hi, after years of beeing pleased with local storage and migrating the complete storage from one host to another, it was time for ceph. After setting up a cluster and testing it, its time now for moving a lot of VMs on that type of storage, without