similar to: SSH backups - 1hr daytime; 8hrs nighttime

Is it possible to build a dialplan in which shifting from daytime to nightime is not hour based but phone driven ???

Hello again dear list. Could you please help with this? Thank you for all support, you are great, and i am now at a late stage in the setup and tweaking this server, So I hope you can help me again. I Can't make include the context nighttime. Just to demonstrate if it works, I have a playback function there. But CLI reports: CLI [Jun 18 14:20:22] WARNING[2287]: pbx.c:9542

Hi all, One of the centos 5.1 servers was scanned by a customer and he suggests turning off daytime on port 13. When I look at /etc/xinetd.d/daytime* the 2 files say disabled yes So is there something else I should be looking at ? Thanks, Jerry

The actual machine I have is a SPARCStation20. I know I can't d/l the binaries, but I've heard that it's possible to compile the source. I'd like to hear from anyone that's accomplished this feat, with, if possible some pointers on how to do it. I've never yet compiled any source code, (I find it difficult to grasp the ins-and-outs of it ("./configure" this,

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

Hello, Using openssh 2.1.1p1 I have tried to use scp to copy a file from one remote system directly to another remote system - e.g. 'scp -i ./ecp eros:jhf alice:jhf', so the file jhf is copied from the remote system eros to the remote system alice via an intermidate system (the one where the command is issued from). The key is in the file ecp. Using protocol 1 it doesn't seem to

Hello, I'm using openSSH 2.1.1p2 from my Linux PC to Solaris 7 and 8 systems (using 2.1.1p1). No problem, except that if I run a program on the Sun, having used slogin to connect to it, and then try and issue a control-c to break into the program it seems to be ignored. I can control-z and then kill the suspended job, but I'd prefer control-c. I tried setting '-e none' on the

Hello, I just installed the above openssh onto a Sun Solaris 7 and Solaris 8 system. No problem with that. However, I now seem to get some rubbish processed when I login with slogin. An example: Last login: Tue Jun 13 12:31:27 2000 from jhorne.csd.plymo:tJ` ^[[?1;2c Telnet logs in okay, but just shows 'Last login...jhorne.csd.plymo'. This seems to get passed to the shell, which it of

Spring is back in the Stockholm area. After a few day's worth winter re-runs, the sun is back and night-time temperature is at least 5 degrees celsius. Time to move out all my annual flowers and prepare the garden for summer. Sweden is famous for our annual five week holidays - by law. From june to late august, it's almost impossible to make any business decision, since there's always

============= SJphone Log ============ Outgoing SIP session Respondent: (sip:8612@192.168.2.2) Remote client: Started: May 26 16:33 Accepted: no Ended: May 26 16:34 End reason: Call rejected: 503 Service Unavailable =============== Asterisk Debug ================ Executing Dial("SIP/2201-a83e", "IAX2/<FWDNUMBER>:@iax2.fwdnet.net/612|60|r") in new stack --

I'm having problems still with password authentication for 1.9.18p7. Samba only recognizes the root password only!!!! I thought password authentication was fixed in version 1.9.18p5. Anyway, here's output of the problems I'm facing: After starting smb and nmb using root's ID the following test was successful: 3 root@Sun-E3000:/usr/local/samba/private ==> smbclient -L

When `length( skewed.probs ) > 200' uniform samples are generated in R-devel. R-3.5.1 behaves as expected. `epsilon` can be a lot bigger than illustrated and still the uniform distribution is produced. Chuck > set.seed(123) > > epsilon <- 1e-10 > > ## uniform to 200 then small > p200 <- prop.table( rep( c(1, epsilon), c(200, 999-200))) > ## uniform to 201

I am making some changes to the dial plan at the request of the company president and have run into some problems. I have a couple of layers of menu's and I am not sure how to handle them. Here is how it should work (sorry for the crappy diagram) main menu --------Dial 1 for support | Dial 2 for special | Dial 3 sales

I've had these laying about for a while, can't remember whether I sent them before. diff -u openssh-2.1.1p1.orig/entropy.c openssh-2.1.1p1/entropy.c --- openssh-2.1.1p1.orig/entropy.c Wed Jun 7 08:20:23 2000 +++ openssh-2.1.1p1/entropy.c Thu Jun 15 13:58:25 2000 @@ -201,7 +201,9 @@ total_entropy_estimate += stir_gettimeofday(1.0); total_entropy_estimate +=

The attached patch adds support for array sessions, project id's, and system audit trail id. Arrays are available at least on UNICOS in addition to IRIX. The project id & audit stuff is IRIX specific. Otherwise, the IRIX support in the current OpenSSHp looks good. (There were some utmp/wtmp oddities, but I think they've gone away in the latest release.) -- Mike Stone --------------

I've compiled the latest version of samba (1.9.18p4) and set up password encryption (per instructions in the ENCRYPTIONS.txt file). Setting root's smbpasswd worked with no problems. I set another user (me) with an smbpasswd. Tried "smbclient -L '\\hostname\wwinzer'". The output is the following: 68 wwinzer@Sun-E3000:~ ==> smbclient '\\champusa.com\wwinzer'

It's really weird how many times thing break in threes. This time is was my wife's laptop, my router and a phone. Anyway... My network has a router and 2 computers; my F11 box with the samba server on it called steve and my wife's laptop now running Windows 7 called Kellie-PC. My old router was a Linksys WRT54G that I had flashed with DD-WRT. I was using DHCP and DNS masquerading in

Hello, How would you implement free sitting ? The idea is to offer teachers the ability to share the same desk and hardphone : for instance, Mr Foo is teaching mechanics on mondays while Mr Bar is teaching english on wednesdays. Each has his own extension but use the same hardphone. 1. Does a program check a calendar or database somewhere to allocate a phone to a user (as teachers schedules are

Guys I am having some serious issues with my call queue and Management is breathing down my neck pretty bad, and I am running out of ideas. I have a single queue for my tech support department. I originally was using the AgentCallbackLogin for them and it tested out great on our testing weekends, but it hasn't worked out since. It would only let one of them take calls at a time, no matter

Hello, We are using CentOS 6.6 and keepalived 1.2.13 on two servers for failover, no load-balancing. Failover is governed by the NIC being present, and the Apache and Tomcat processes being present. Both servers are configured as 'EQUAL' (not master/backup). An initial priority of 100 is set, and if a process or NIC fails, then this is reduced by 60 - causing a lower priority to be seen