similar to: X11Forwarding problem

Hi! Several people noticed problems with openssh Version 1.2.2 through 1.2.3 related to X11 forwarding under Linux. For example: Magnus Holmberg <pucko at lysator.liu.se> wrote: > I have just installed openssh-1.2.2p1-1 > on two of my machines and I have one problem. > > I have > X11Forwarding yes > in my /etc/ssh/sshd_config > > but when I try to ssh to that

On 13/10/2017 08:03, Damien Miller wrote: > On Thu, 12 Oct 2017, Michael Felt wrote: > >> On 08/10/2017 23:32, Michael Felt wrote: >>> On 04/10/2017 11:07, Michael Felt wrote: >>>> I do not often use X11 - but when I do I prefer to enable >>>> X11forwarding, and when finished - turn it off. This is preferable, >>>> imho, to having

What has to be installed on a host for it to do X11Forwarding in SSH? My (FreeBSD) workstation at home is behind NAT. From home, I can SSH to a FreeBSD firewall at work, and from there I can get to other hosts around the internal network there, some of which run X clients. Does X have to be installed *on the firewall* for me to forward X11 connections from the X clients back to my workstation

I am running 2.1.1p4 on RedHat Linux and several Solaris boxes. I have X11Forwarding set to yes in .ssh/ssh_config, as well as all of the sshd_config files. Works just fine between machines inside my firewall, but I can't forward X11 clients from outside the firewall. We have a PIX doing NAT. Any idea what I'm missing?

On 08/10/2017 23:32, Michael Felt wrote: > On 04/10/2017 11:07, Michael Felt wrote: >> I do not often use X11 - but when I do I prefer to enable >> X11forwarding, and when finished - turn it off. This is preferable, >> imho, to having "clear" X11 processing when local - and otherwise >> impossible when working remote. >> >> Working with

Greetings, I'm running OpenSSH_2.5.2p2, and OpenSSL-0.9.6a, on BSD/OS 4.0. Following the FAQ, I added the following line to my sshd_config in order to enable X11 forwarding: X11Forwarding yes Now openssh is disconnecting my sessions immediately after authentication and login with the following error messages: "error: socket: Protocol not supported" "Disconnecting: Command

I do not often use X11 - but when I do I prefer to enable X11forwarding, and when finished - turn it off. This is preferable, imho, to having "clear" X11 processing when local - and otherwise impossible when working remote. Working with openssh-7.5p2 I cannot figure out what (extra) I need to do with sshd_config to get it working. I know that there is a security-fix starting with

below. Dan ___________________________________________________________________________ Dan Yocum | Phone: (630) 840-8525 Linux/Unix System Administrator | Fax: (630) 840-6345 Computing Division OSS/FSS | email: yocum@fnal.gov .~. L Fermi National Accelerator Lab | WWW: www-oss.fnal.gov/~yocum/ /V\ I P.O. Box 500 |

Dear R users, Does anyone notice that Rterm.exe does not work well with rxvt.exe, an xterm emulator for Cygwin? It produces an error message window with the following message: This program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor It also prints "Signal 127" in rxvt window. Rterm --ess, however, works.

Just to bring everyone up to date, could we get a report on the status of support for the 2.x protocol? The home page says "next major release" - is that 1.3 or 2.0? And is there any feel for when it'll be generally available? -- John Hardin Internal Systems Administrator Apropos Retail Management Systems, Inc. <johnh at aproposretail.com>

I am starting with a matrix in which rows are vegetation plots and columns are various characteristics including ID# and elevation. I removed elevation and ID columns to avoid having those characteristics influence the distances between points which I calculated using the "dist" command. The resulting distance file was then used in isoMDS. What I want to know is whether I can

Brian's fix works for me. I did up an SRPM (unsigned) with it in: http://linuxatlax.org/trevor/srpms/rxvt-2.6.PRE2-6.src.rpm Brian D. Winters <brianw@ALUMNI.CALTECH.EDU> wrote: > On Tue, Jun 08, 1999 at 10:24:29AM -0700, Zack wrote: > > in /etc/fstab: > > > > none /dev/pts devpts gid=5,mode=620 0 0 > > This is not sufficient when

On 13/10/2017 15:29, Michael Felt wrote: > This verifies it is xauth related: > > debug3: sending debug message: No xauth program; cannot forward with > spoofing. > > so, added an extra debug - and this is what I see: > > debug1: session_input_channel_req: session 0 req x11-req > debug3: setup_x11fwd: xauth_location == /usr/X11R6/bin/xauth > debug3: sending debug

With latest compiz from git and latest stable version I have an issue with rxvt-unicode (urxvt). Every window seems to get screwed up, I can't touch the window title at all, I have to use the move key-bind to move the window around. The title bar also is half white half blue, Has anyone else encountered this issue. It is not present in Metacity or Openbox. But it is in beryl. Here is a

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#ffffff" text="#000000"> <font face="sans-serif">Hello all,<br> <br> I've googled

hello list, I am attempting to ssh via a user account setup for amanda backups from the backup server to the test backup client. AFAIK everything is setup correctly yet when I ssh as the user to the client I have to type the password. the public key is in the authorized_keys file of the client and permissions all seem correct. Here is a verbose output of the ssh session [amandabackup at

http://bugzilla.mindrot.org/show_bug.cgi?id=1336 Summary: Environment variable changes Product: Portable OpenSSH Version: 4.3p2 Platform: ix86 OS/Version: Linux Status: NEW Severity: enhancement Priority: P2 Component: ssh AssignedTo: bitbucket at mindrot.org ReportedBy: kernel at pkts.ca

Hey everyone, I wanted to add support for denying PTY allocation through OpenSSH. I'm not certain if this is quite thorough enough for all cases, but for me it might work for the moment. I know that you can currently do this through authorized_keys, but as far as I know that only works for an actual key. In my use case, I wanted a user with no password which is forced to run a specific

Nico Kadel-Garcia <nkadel at gmail.com> writes: > Dag-Erling Sm?rgrav <des at des.no> writes: > > Some OS distributions (FreeBSD, RHEL / CentOS, probably Fedora) have > > X11Forwarding enabled by default. > I'm not sure I see your point. With X11Forwarding off by default, one would assume that it is only enabled on a case-by-case basis for users or groups who

Hi, I am having trouble running sftp from the openssh package openssh-5.5p1. There seems to be an authentication problem. This is what happens: $ sftp -o "Port 2022" testu at localhost testu at localhost's password: Connection closed QUESTION: Can someone spot the problem please? How do I fix this? FURTHER INFORMATION I can run openssh's ssh: $ ./ssh -p 2022 testu at