similar to: problems logging in from 1.2.2 client to 1.2.1pre24 server

Hi, I have the following unusual setup: F is a firewall host. Its external Interface has IP 172.16.20.4, and the internal Interface ist 192.168.215.1. A and B are internal hosts with IPs 192.168.215.31 and 192.168.215.71. F's port 10022 is transparently forwarded to A's port 22; F's port 20022 is transparently forwarded to B's port 22. So, connecting to 172.16.20.4:10022 gives

Hi! Look: |mh at q[4/504]:/mnt/sd04-p7/masterbackup$ scp * torres.ka0.marc-haber.de:~mh/q/ |Enter passphrase for RSA key 'mh at q': |raid0.tar.bz2 15% |**** | 99864 KB 00:00 ETA |root.tar.bz 100% |*****************************| 5406 KB 00:00 ETA |mh at q[7/507]:/mnt/sd04-p7/masterbackup$ ls -al `which scp` |lrwxrwxrwx 1 root root

Hi! When I try to use scp from or to a machine that runs openssh-1.2pre16 on Debian Linux, I keep getting the error message "scp: command not found". Executing "ssh this-host echo \$PATH" yields "/usr/bin:/bin:/usr/sbin:/sbin:" which might be set in config.h. sshd is installed to /usr/local/stow/openssh-1.2pre16/sbin, scp to /usr/local/stow/openssh-1.2pre16/bin;

Hi! I am experiencing strange smbmount problems with my 3 computers. I have: janeway, an NT 4.0 SP5 box, torres, a Linux box running kernel 2.0.36 and samba 2.0.5a, q, a Linux box running kernel 2.0.36. Both Linux machines have smbfs compiled as a module and loaded. I can smbmount janeway shares on both torres and q, and I can see torres shares on janeway. Naturally, q can't be seen by

Hi! This is my share: |[root] | comment = Root-Partition | path = / | guest ok = no I have a file called /etc/exim/config that is required to be owned by mail.mail, mode 664. My user account is called mh and I am member of the group mail. I'd like to edit that file via samba with an editor that is running on my desktop Windows box. Whenever I write to the file, it gets reset to mh.mh 744

Hi, I am trying to print from my Debian unstable Notebook to a printer that is connected to a Windows 2000 Server. Target environment is CUPS which uses smbspool as a front-end, and smbspool gives a strange error message. | export DEVICE_URI="smb://account:password@domain/server/printer" | smbspool foo bar Title 1 ignore Makefile gives the error message | ERROR: ERRHRD - ERRgeneral

Hi! I am using smbfs to mount a NT 4.0 SP3 disk to a Linux 2.0.33 box (SuSE 5.1). This works most of the time. Sometimes, I get a syslog entry |Jun 26 23:03:10 palandt kernel: smb_dont_catch_keepalive: server->data_ready == NULL on the smbmount command, which subsequently fails "illegal parameter". What am I doing wrong? I currently can't browse the digest archives because my

Hi! I have a new machine on a network: kemmer: New Linux box (kernel 2.0.36. Samba 1.9.18p10) torres: old Linux box (kernel 2.0.36. Samba 1.9.18p10) janeway: Windows NT 4.0 SP4. torres and janeway are performing flawlessly, I can access both machine's shares from the other one. kemmer is new and can't access DNS yet. Thus, I have to use the -I switch to smbclient and smbmount to access

Hi! The current version of sshd allows to restrict keys to issue only specific commands. However, port forwarding can only be forbidden entirely. Given the following situation: A client C uses S as a POP3 server. We want to poll E-Mail via POP3 from S to A via an ssh tunnel without being asked for a password. Thus, we create a passphrase-less key pair on A, transmit the public key to S and

Hi! This morning, I found a system that was still running an ancient samba. I immediately upgraded it to samba 1.9.18p1 and had the opportunity to fiddle with the make file after not doing this for a couple of months. The default makefile sorts the files like this: BINDIR (/usr/local/samba/bin) smbpasswd smbrun smbclient testparm testprns smbrun smbstatus smbpasswd

[Note: This has been posted to linux-kernel and was ignored. Since smbfs is maintained by the samba team, I am retrying here] Hi! To maintain and install packages from CD-ROM to my Debian/GNU Linux system, I use Debian's apt package. Since my Linux box is stowed away in a closet, I use an smbfs mount to mount the CD-ROM drive from my Windows desktop machine to the Linux box. This used to

Hi! I am trying to print from an NT machine to a simple samba printer. That NT machine is the PDC and the samba box is having logins authenticated by the NT box. When I try to access the printer with my own username, it works fine. As soon as I have the account that is destined to do the printing print, it can't log in. I have included my smb.conf file and two log excerpts - one successful,

Hi, I'm getting this error when I ssh to the servers. ssh_exchange_identification: Connection closed by remote host I added /etc/hosts.allow and it actually worked once and if I tried again I get the same error. OpenSSH_3.6.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090702f debug1: Reading configuration data /usr/local/etc/ssh_config debug1: Rhosts Authentication disabled,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 openssh-1.2.1pre24 is being uploaded to: http://violet.ibs.com.au/openssh/files/ This release fixes the silly bugs (almost all autoconf related) that crept into yesterday's release. 19991231 - Fix password support on systems with a mixture of shadowed and non-shadowed passwords (e.g. NIS). Report and fix from HARUYAMA Seigo

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 openssh-1.2.1pre24 is being uploaded to: http://violet.ibs.com.au/openssh/files/ This release fixes the silly bugs (almost all autoconf related) that crept into yesterday's release. 19991231 - Fix password support on systems with a mixture of shadowed and non-shadowed passwords (e.g. NIS). Report and fix from HARUYAMA Seigo

Yo All! Sorry if this is obvious but I am new to openssh. I have used the original ssh for a while and am familiar with it (and it's restrictive license). I am trying to port openssh-1.2.1pre24 on to SCO UnixWare 7.1.0. I will post the small patches when it is really running. Two problems, SCO has no /dev/random so I installed egd-0.6. It usually works but sometimes dies. I have sent

We've got set of servers that use AFD (http://www.dwd.de/AFD) to scp files to a set of receiving servers. There are about 25 sending machines, and 12 receiving machines. All the servers are RHEL 4 and 5, with the senders running openssh 4.3p2, and the receivers running 3.9p1. Most files are sent without a problem, but on a pretty regular basis, we get "ssh_exchange_identification:

Hey all, I installed OpenSSH on a redhat 6.0 box using the 1.2.2 i386 rpms, and I can't connect to it from other machines. I edited the sshd_config file and changed the ListenAddress from 0.0.0.0 to the machine's IP number. The error I have been getting at first confused me, so I checked out the code, and found the function in the sshconnect.c file. The strange thing is that sometimes

I am working on a proxy which can be hosted on a single IP address and dispatch requests to different backends depending on which hostname the client used to connect to this IP address. Currently such a proxy can be build to support HTTP, HTTPS, SMTP, and DNS. However SSH support is impossible due to the ssh client not sending the information such a proxy would need. I am not the first to want

Renaud Guerin <renaudg at hexanet.fr> writes: >I'm running OpenSSH 1.2.2. with OpenSSL 0.9.4 on Linux 2.2.14 >(Mandrake 7.0) They were recompiled from source RPMS with gcc 2.95.2 >When I try to connect to localhost, I get >SSH Version OpenSSH-1.2.2, protocol version 1.5. >Compiled with SSL. >debug: Reading configuration data /etc/ssh/ssh_config >debug: Applying