similar to: log server

Hello, I use rsync (among many other things) as an incremental backup tool. Every night I save /{home,etc,var} from several servers. On one of them we keep 52 weeks of system logs, so each time syslog is rotated all old syslog.x.gz (where x is between 1 and 213) change names. This impacts our backup transfers because the incremental snapshot now has to include all syslog.x.gz files even though

Hi all, I''ve just built Mandrake 10.1 on a Compaq Deskpro that I''ve built as a router/firewall and am redirecting port 80 outbound to force users through the Content Filter. I''ve run this setup on Mandrake 9.0 and 10.0 without any problems but this time the following happens. Squid is accessed through port 3128 and Dansguardian via 8080. If I set my browser on a

I''ve installed a bering box acting as a firewall for a lan; the lan is 192.168.1.0/24 the bering box is 192.168.1.254 I''ve installed a squid server 192.168.1.1 It is possible to configure shorewall for a transparent proxy to the squid server? I''ve tryed with REDIRECT loc loc:192.168.1.1:3128 tcp www - !192.168.1.1 in the rules file I get this error: Error:

https://bugzilla.mindrot.org/show_bug.cgi?id=3662 Bug ID: 3662 Summary: Make logging of chrooted sftp sessions possible internally routed to local file, without /dev/log device Product: Portable OpenSSH Version: 9.6p1 Hardware: amd64 OS: Linux Status: NEW Severity:

Hi, I followed the instructions in the section "Squid (transparent) Running on the Firewall" on http://www.shorewall.net/Shorewall_Squid_Usage.html to setup Squid transparently on a Linux gateway. My net is as follows: loc subnet --- fw Linux Gateway --- ADSL router 192.168.1.0/24 192.168.1.92 (eth1) WAN.WAN.WAN.2 (gw = WAN.WAN.WAN.WAN (eth0) 192.168.1.92) (gw =

Hi people: I have a winbind 3.2.5 running on a box to authenticate users in my squid. My PDC is a samba 3.0.24 and it stores users on ldap. I have aprox 500 users and when they all use the squid my winbind generates a lot of traffic to my pdc box causing high load on the smb process that talks to the winbind... killing the performance of the squid. Is there anyway to reduce this traffic? Why

i have squid running on DMZ zone and my network using ProxyARP on eth1 and eth2 mylinuxbox slackware 9.2 my network can access to internet normal, but can''t redirect to squid server from firewall. sometimes my network can connect to squid and sometimes bypass this squid server. i dont know what going on. now.. my network bypass redirect to squid server. my config file follow document

Hi folks, So, I have a pretty simple setup - a linux router machine running as a firewall/router for a small neighborhood LAN (approx 20 machines). I also have squid running on the box in non-transparent mode, and also I have set up NAT for TCP/UDP ports above 1024 for all clients and SSH/POP/SMTP/CVS NAT''d for selected ones based on MAC filtering. No hosts whatsoever can access ports 80

Hello, I'm having a little problem after logging into domain via samba, after a few minutes the squid no longer authenticates the users through single sign on and keeps asking for authentication in the browser without stopping. below is my settings and error logs. smb.conf [global]workgroup = SALEnetbios name = utmadmserver string = PROXY SERVERload printers = nolog file =

>If you > >a) Have the correct REDIRECT rule (which you do); and >b) Are accepting $FW->Net HTTP traffic (which you are -- at least with your >policy); and >c) DNS works from your firewall (I assume it does since you are wide open >from $FW->Net); then >The problem is in your Squid configuration (this is true in %90 of the >reports on this list where Squid

Hello: I have a squid3 with aunteticacion ntlm integrated to samba4 but in workstations with windows 8.1 constantly asked for the username and password and it does not let the user navigate, use debian 8 + samba 4.7.7, no idea because that happens in client with windows 7 works well. smb.conf workgroup = MYDOMINIO security = ads netbios name = srv-proxy server string = Servidor Proxy de

Hi, I just setup a very basic HTTP proxy with Squid on a router running CentOS 7. Up until early 2020 I've been using a bone-headed shell script with iptables to configure my firewall. But I decided to follow advice from a few gurus on this list, and I've since moved my configurations to FirewallD, which works nicely. There's one configuration left to tackle, that's port

Hi everybody. We are running Shorewall and Squid on Suse on the same box. Each is working fine independently, but we can''t get them to cooperate. The access log in squid shows no requests when Shorewall is on. Here are all the changes we made in the configuration files. Everything else is the same. We have read through the mailing list and the guide, but still haven''t figured it

Hello, I know centos does not use syslog-ng, but I have installed it at my university. My intention is if a particular string appears in my /var/log/messages I would like to get an email alert. For example, if i see a message "foo" in /var/log/kern I would like to email myself. Any idea how to do this? Has anyone done this before? TIA

Hi, I recently migrated my office's server from Slackware64 14.1 to CentOS 7. Right now I'm in the process of configuring the Squid web proxy. I edited the default /etc/squid/squid.conf, and here's what I have so far: --8<-------------------------------------------------- # /etc/squid/squid.conf # Nom d'h?te du serveur Squid visible_hostname amandine.microlinux.lan #

I have a setup something like this: WWW -- ADSL Router -- Gateway -- LAN 10.0.0.2 --> <-- 10.0.0.1 192.168.0.1 --> <-- 192.168.0.X Shorewall Squid proxy On the gateway, shorewall is sucessfully redirecting port 80 from the LAN to the proxy on port 3128. Is it possible to also redirect

Hi everyone - I was wondering how do I setup a rule with the following scenario: I have a VPN site-2-site connection setup. Also, on each site I have squid which redirect all local HTTP traffic on 3128. But I have problems when I try to access the other site web server which is 10.50.20.198 from my network setup which is 10.50.30.0/24. I have all other traffic flowing between the two sites

ive got a config thats client -> server ->Dansguardian->Squid -> onward adn I want to transparently redirect web traffic to DG/Squid Not sure where the problem lies - hoping you guys can help me and at least tell me that its NOT my shorewall config heres the configs When I point a browser straight at 3128 or 3129 I get web pages back and the appropriate stuff in the logs . I get a

Hello Group I am trying to set up a demo of Squid at my location to to a person that has proxy ports blocked on his firewall at his location by having him set his IE Browser set to use proxy server 64.42.49.235 port 80. My thinking was to set up a rule in shorewall which redirects port 80 to 3128 as in a local setting. My test server is running rh 7.3, Shorewall 1.3.14 with one interface

Hi, I am running squid as a TRANSEPARENT PROXY WITH SQUID 2.5 on CENTOS 4.5. Pls see below for squid.con file. http_port 3128 cache_mem 64 MB cache_dir ufs /var/spool/squid 100 16 256 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # Example rule