similar to: [Bug 1091] targetshouldbedirectory not set for remote wildcards

http://bugzilla.mindrot.org/show_bug.cgi?id=1091 ------- Comment #1 from djm at mindrot.org 2006-04-18 15:07 ------- We have this "half right" now, in that scp hosta:foo hosta:bar /tmp/abc will check that /tmp/abc is a directory, but there is no way to know a priori that : scp hosta:* /tmp/abc will yield multiple files. I suppose we could modify sink() to raise an error on the

Customer has a Thumper running: SunOS x4501 5.10 Generic_120012-14 i86pc i386 i86pc where running "zpool detech disk c6t7d0" to detech a mirror causes zpool command to hang with following kernel stack trace: PC: _resume_from_idle+0xf8 CMD: zpool detach disk1 c6t7d0 stack pointer for thread fffffe84d34b4920: fffffe8001c30c10 [ fffffe8001c30c10 _resume_from_idle+0xf8() ]

Hello. I've been trying to access www.soft-swtch.org for a couple days, but it seems to be down. Anyone got the same? I need to talk to Steve Underwood, could someone give me his email/phone. Please, in private of course. Thanks. Denis.

Hi , when i connect to sshd , the session doesnt allow me to issue ^C ^Z, it doesnt work. Please let me know if there are any settings to control it. telnet works fine. my settings, version: OpenSSH_6.6p1, OpenSSL 1.0.1h 5 Jun 2014 stty -a speed 38400 baud; rows 24; columns 80; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch =

on Solaris 10 5.10 Generic_118822-23 sun4v sparc SUNW,Sun-Fire-T200 I run #iostat -xn 5 to monitor the IO statistics on SF T2000 server. The system also have a heavy IO load, for some reason iostat donot refresh (no any update). It seems like iostat is calling pause() and stucked there. Also my HBA driver''s interrupt stack trace indicates there is a lot of swtch(), the overall IOPS

Hi there, I've written some enhancements to scp.c and pathnames.h to enable the scp to arbitrarily set the remote scp path. (eg $ scp -e /usr/bin/scp foo user at bar:foo) I did read the "scp: command not found" FAQ entry but I'm not quite sure why we can't do this, unless it's because enhancements to scp are no longer a priority. Any other reason why it "is the

On Sun, Aug 23, 2009 at 5:56 PM, Daniel Dunbar<daniel at zuster.org> wrote: > We would like to have access to some kind of regular expression > library inside LLVM. For example, we need this to extend the FileCheck > test case checking tool to support regular expressions. > > There are three obvious options: >  1. Roll our own library. Multiple unnamed individuals may even

After multiple power outages caused by storms coming through, I can no longer access /dev/zvol/dsk/poolname, which are hold l2arc and slog devices in another pool I don''t think this is related, since I the pools are ofline pending access to the volumes. I tried running find /dev/zvol/dsk/poolname -type f and here is the stack, hopefully this someone a hint at what the issue is, I have

At work we have a large collection of scripts to move log and config files around. These depend on commercial (F-Secure) ssh/scp, as it supports the -u option to delete the source file after (successful) copying. That is the sole reason we can't run openssh on our 150+ unix boxes. I have attached a patch below, which adds the -u option to delete the source file after copying, provided there

I have a new APC Smart-UPS SUA2200RM2U. I've had no success with the manufacturer's PowerChute software and smart signaling, so I have decided to try NUT. The smartups driver can't make contact through the serial port. Since this is rack-mounted, it comes with a 940-1524 serial cable. As far as I can tell, this is supposed to work with smart signaling. Here's my ups.conf:

I'm fond of the "-a" (archive) option of cp, and I'm a heavy user of scp, so I guess it's inevitable that I would eventually add support for "-a" to scp. :-) Actually, it's a "-L" flag for preserving symlinks, and a "-a" flag that is shorthand for "-Lpr". Please let me know if I'm not doing this right.... I made a great

I''ve recently re-installed an X4500 running Nevada b109 and have been experiencing ZFS lock ups regularly (perhaps once every 2-3 days). The machine is a backup server and receives hourly ZFS snapshots from another thumper - as such, the amount of zfs activity tends to be reasonably high. After about 48 - 72 hours, the file system seems to lock up and I''m unable to do anything

Now at 36 hours since zdb process start and: PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 827 root 4936M 4931M sleep 59 0 0:50:47 0.2% zdb/209 Idling at 0.2% processor for nearly the past 24 hours... feels very stuck. Thoughts on how to determine where and why? -- This message posted from opensolaris.org

Hi, I have made a patch which improves scp utility. It adds two new features: rate limit and resume support. With rate limit it's possible to limit transfer speed. Resume allows to continue file transfer where it was last interrupted. Also the progress meter was improved. Here is my patch, please send comments about it and what I can do better if there is something to fix. ---

Thanks for these explanations - it all makes sense, that is, the default behavior for a process that does not capture SIGQUIT is to quit and perform a core dump (https://en.wikipedia.org/wiki/Unix_signal#SIGQUIT). Then the remaining question, as Luke says, is: should R handle this signal? For instance, in interactive mode, SIGQUIT could maybe bring up: Possible actions: 1: abort (with core

I don't know if anyone would be interested in this but I'm including a patch to allow for offsets when transferring files with SCP. It's pretty simple and assumes the user knows what they are doing (for example, if transferring with a wild card the offset would apply to all files). -A is the number of bytes offset from the beginning of the files. -Z is the number of bytes inset

the configure option --program-prefix does not work although it is listed in teh configure --help output. The attached patch fixes these issues: 1) program prefix is not substituted in configure 2) program prefix is not present in Makefile 3) scp requires use of a known "scp" program -- bryan diff -cr openssh-2.9.9p2.orig/Makefile.in openssh-2.9.9p2/Makefile.in ***

Hi, When implementing forced-commands using authorized-keys, I realized that scp (when run at the server end) arguments -d, -f and -t are not documented on the man page. scp.c: ... /* Server options. */ case 'd': targetshouldbedirectory = 1; break; case 'f': /*

https://bugzilla.mindrot.org/show_bug.cgi?id=1768 Summary: scp: wrong error message when destination directory ends with a slash and is missing Product: Portable OpenSSH Version: -current Platform: All URL: https://bugs.launchpad.net/bugs/18757 OS/Version: All Status: NEW Severity: normal

I compiled OpenSSH 3.6.1p1 on NCR MP-RAS v4.3 (or at least "uname -a"'s output of 4.0.3.0 suggests v4.3, I'm not positive). I was able to compile zlib (1.1.4) and openssl (0.9.7a) with little trouble. OpenSSH took hand-hacking the includes.h file as follows: diff -cr openssh-3.6.1p1/includes.h openssh-3.6.1p1-customized/includes.h *** openssh-3.6.1p1/includes.h Sun Oct 20