similar to: *tangent* High Availability using 2 sites -- yep, "propogation."

Hello CentOS, I've just taken 2 old servers running CentOS 3.x, wiped it out, and installed CentOS 4.1 The systems seemed to work fine with CentOS 4.1, but when I proceeded to run yum -y update, all the RPM's (101) download and seem to install fine - however, upon reboot, partitions such as /usr/ and /var will not mount (ext3). These machines both use the Intel S875WP1 P4 Mainboards.

Hello CentOS, Setup: CentOS 4.1 (Latest YUM) Sendmail Multiple IP's on eth0:x (1 through 150 or so) iptables I've noticed that whenever I add another IP address to my servers on one of the eth0:x aliases, the IP comes up fine and restarting pure-ftpd and apache seems to be able to use the IP straight away. Sendmail also 'seems' to use it fine, but something odd is occuring that I

Hello CentOS, I'm an old hat, and have been compiling my own MySQL, Apache, PHP, OpenSSL, ModSSL, etc. for my webservers for years. I'm playing around with the RPM installs on CentOS, and have basically been able to get most things setup so that they "function" about the same. If I could stick to RPM's rather than compiling my own sources, it would save me a fair bit of

Hello CentOS, I'm having a strange situation on one of my servers. I'm running CentOS with all the latest yum updates. It runs fine, but iptables does not seem to be 'consistently' dropping the packets from the IP's I've put a drop rule in for. When I do iptables -L I still see the rule in place: iptables -L Chain INPUT (policy ACCEPT) target prot opt source

Hello CentOS, I don't usually use RPM's for apache, but I'm playing with a centos 4.2 w/apache and suexec. I've got the suexec apache RPM installed, but I'm not sure how to actually get apache to use it. The /etc/httpd/conf/httpd.conf does show it in the modules: LoadModule suexec_module modules/mod_suexec.so but httpd -l doesn't list suexec as being loaded. I'm

Hello CentOS, Is there a specific RPM that makes "insmod ip_conntrack_ftp" available? I've been using that on a number of servers fine, but the latest one I've built, running insmod ip_conntrack_ftp gives me: insmod: can't read 'ip_conntrack_ftp': No such file or directory -- Best regards, Mickael mailto:mike at kamloopsbc.com www.MickaelMaddison.com

Hello CentOS, I'm curious... there seems to be a couple of default firewall rules that I'm not familiar with in the CentOS 4.0 # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD

Hello CentOS, I'm seeing this in the logwatch output. Anything I find on the net hasn't been definitive. The system is an x-less server. --------------------- Kernel Begin ------------------------ WARNING: Kernel Errors Present vesafb: probe of vesafb0 failed with error -6...: 6 Time(s) ---------------------- Kernel End ------------------------- -- Best regards, Mickael

Hello CentOS, I'm trying to isolate a problem with a notebook. I've tried to install CentOS from CD - but once I get the start screen, I type 'enter' to begin installing. The installer starts to load but only gets as far as: running install running /sbin/loader That's it. Nothing beyond that... locks up solid. The equipment is ECS 736, P4 2.6Ghz /1024MB RAM, 40GB HDD.

Hello CentOS, Does anyone know if there's a driver out there that'll enable CentOS 4.x to use the Intel Matrix SATA RAID settings on the 915 chipsets? -- Best regards, Mickael mailto:mike at kamloopsbc.com www.MickaelMaddison.com

I''ve got a client who''s recently been moved onto a CentOS4 machine from a 3.x and is writing: "It looks like there''s one remaining problem now; at several points in the PHP part of the dating software, C- binaries are called using popen(). The binaries work correct (tested at the command line with the proper arguments) The popen() retrieves the correct command

Hello, I have Asterisk 1.6.2.9-2, the directive "sendrpid" does not work! I placed this in my peer: (sip.conf) sendrpid=yes trustrpid=yes or sendrpid=yes trustrpid=no (and restarted Asterisk) and the line "Remote-Party-ID" does not appear in my sip debug! Please help me, Mickael. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I am running an AGI script in a command dial, or call a SIP trunk. I want to execute after 10 minutes a voice message (stream file) on the channel to warn the person that the call is about to end. How to do that? Thank you, Mickael. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Good morning, or Good afternoon! It depends :-) I have a standard Asterisk configuration: SIP friends (phones) <-----> Asterisk <-----> SIP gateway to PSTN converter 80.236.215.61 109.69.217.6 internal IP ( 10.4.0.10/255.255.255.0) When analyzing traffic on a SIP friend/phone I see this: INVITE sip:xxxx at 80.236.215.61:64946;ob

All, According to my readings CDRs are stored at the end of the call. My concerns is when asterisk goes down (I know that it's never happen but it's just in case) or when the is a power shutdown of the server. then CDRs are not stored in mysql. is there a way to store periodially CDR during a call, and set the periodical timer regarding the context. if no is there a way to retreive CDR,

Hello, When I get a SIP INVITE as follows: INVITE sip:s at 10.1.0.191:5060 SIP/2.0 Max-Forwards: 69 From: "0475XXXXXX" <sip:1053212 at sip.domain.com>;tag=as7df9ab18 To: <sip:02XXXXXX at IP:5060> Contact: <sip:1053212 at IP:5060> Call-ID: 344d42bd16975a54141d11f635bdfc71 at sip.domain.com CSeq: 102 INVITE Date: Wed, 26 Mar 2014 15:06:01 GMT Allow: INVITE, ACK, CANCEL,

Hi, I am working on Trixbox. I want to create my own dial() function (named specificdial()) and I want to know how I can create a module and integrate the module in the trixbox plateform. thanks a lot Mickael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091006/b69d4103/attachment.htm

Hello, I look ARI (Asterisk Recording Interface) the publisher site is closed... http://www.littlejohnconsulting.com/ari Thank you, Mickael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100623/a8d923ae/attachment.htm

Hello, I have a Cisco AS5300 connected to Asterisk (1.6.2.9) Between 15-16 minutes, the call is disconnected without reason. Here is what is displayed in the debug: Received an SDES from 10.4.0.10:17399 -- Got SIP response 420 "Bad Extension" back from 10.4.0.10 -- Stopped music on hold on SIP/as5300-1-0000004d == Spawn extension (dialin, 065939191, 2) exited non-zero on

Le 19/06/2015 09:04, Steffen Kaiser a ?crit : > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Fri, 19 Jun 2015, Mickael Choisnard wrote: > >> Date: Fri, 19 Jun 2015 08:29:08 +0200 >> From: Mickael Choisnard <mickael.choisnard at free.fr> >> To: dovecot at dovecot.org >> Subject: [Dovecot] question about /var/mail/xxx >> >> Hi,