similar to: CentOS 64 on AMD 64 4600x2

I've been reading the RHEL 5 manual/guide linked from centos, and the idea of LVM with expandable partitions seems like a great idea (yes duh why else would it exist if not?). Although the documentation shows a screenshot of how the final setup would look like with LVM & RAID together, it doesn't actually gives the step. 1. Am I correct in thinking it should be done in this way -

This is a A8N32-SLI Deluxe motherboard with a AMD Athlon(tm) 64 X2 Dual Core 4400+ Processor. It freezes and cannot be accessed from the network. Keyboard/mouse/display, everything just stuck. It had an uptime of 17 days after I re-connected all cables and boards after a similar crash. My feeling is, this must be a hardware related problem. I inspected the logs under /var/log, but nothing.

So after toying around with some stuff a few months back I got bogged down and set this project aside for a while. Time to revisit. <BR><BR> Looking around there still is not a good "these cards/motherboards" work list. the HCL is hardly ever updated, and its far more geared towards business use than hobbyist/home use. So bearing all of that in mind I will need the

On 12/03/2014 03:24 AM, Fred Smith wrote: > OTOH, I had a perfectly good drive get kicked out of my RAID-1 > array a fewyears ago just because, well, I guess I could say > "it felt like it". I've seen that too several times on my home "server". Once in a while (usually on one of the first days I'm on vacation) one of the drives stops responding. A shutdown

Hi list! I have a 3TB usb drive with an NTFS filesystem on it, that I can't mount.: [bent at bnlaptop ~]$ sudo /sbin/mount.ntfs-3g /dev/sdb1 /mnt Failed to read vcn 0xf28: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then

I have been reading about software raid. I configured my first software raid system about a month ago. I have 4 500 Gig drives configured in RAID 5 configuration with a total of 1.5TB. Currently I configured the complete individual drivers as software raid, then created a /dev/md0 with the drives I then created a /file_storage partition on /dev/md0. I created my /boot / and swap partitions on

Hi All; I'm trying to instal CentOS on my new laptop but I've run into a few issues. It's a Dell Precision M6400 - I'm installing CentOS 5 (64bit) running KDE I have 3 issues: 1) I cannot get the wireless to work 2) I cannot get sound to work 3) I cannot get the full screen resolution I can go to administration --> display and under the 'Hardwae' tab I can

I'm trying to install a bunch of C6 involving initially degraded mdadm RAID 1 Anaconda refuses to let me create a RAID 1 array with only one member. Based on some reading, it seems that I should be able to use kickstart with the PRE scripts to do this. However, after trying for a couple of hours, it doesn't seem that anaconda will allow it, it just boots the created arrays. At best I end

Hi, Today I replaced grub(1) with syslinux on my laptop, after rebooting to syslinux and selecting kernel I got massive freeze along with colorful output to screen - http://i.imgur.com/lFjFc.jpg I think I tried everything, even doing esc and writing after boot: /bzImage-3.1.0, after enter I had the same freeze with the same screen artefacts. How I installed extlinux: mkdir /boot/extlinux

Hello... I have a server with 4 x SCSI drives and I would like to install Centos 4 (or 5) onto a software RAID 10 array. Do you know if this is possible? I noticed that under the Centos 4.92 beta, RAID 5 is an option but for some reason RAID 10 is not listed. There does appear to be a RAID 10 module.... /lib/modules/2.6.9-42.0.8.ELsmp/kernel/drivers/md/raid10.ko More info I found here:

Hello, It seems dovecop pop3 server sometimes inserts a blank line at the top of the mbox. It only happens for certain users not all. I'm not sure why it's doing that. Looking back into the mailing list, I saw the same post in Oct 6, 2003 but there was no reply to it. Is there a patch or fix that i can use to get around the blank line? Thank you. Ken

This is a repost of sorts, and for that I am sorry; I do not think my original posting subject was very clear, and I have more data about the problem. I'm experiencing lots of kernel errors when reading or writing to a disk that is part of an mdadm softraid-5 array. Since originally detecting this problem, I have isolated it to one disk, but I'm not sure what the cause of the error is. I

-----Original Message----- From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Nicolas Kovacs Sent: Sunday, December 17, 2017 12:52 PM To: centos at centos.org Subject: Re: [CentOS] Offsite hosted backup solutions > Can't say about Windows clients, but for all my Linux machines, I'm > using Rsnapshot, either on public or LAN servers. Basically uses rsync > over SSH,

When trying to sync my TV folder to a mirror drive, episodes with non-ASCII characters in them cannot be processed by rsync. Anything I can do about this? For example, I get this: building file list ... file has vanished: "/Volumes/TV/Raising Hope/Raising Hope - S04E01 - De?\#201ja Vu Man.mkv" This is rsync under OS X: $ rsync --version rsync version 2.6.9 protocol version 29

Hello, I've got a 4.4 box that i'd like to implement software raid on. Does anyone have any experiences with this? Thanks. Dave.

I am planning to increase the disk space on my desktop system. It is running CentOS 5.9 w/XEN. I have two 160Gig 2.5" laptop (2.5") SATA drives in two slots of a 4-slot hot swap bay configured like this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End

A little OT - but I've seen a few opinions voiced here by various admins and I'd like to benefit. Currently running a single combined server for multiple operations - fileserver, mailserver, webserver, virtual server, and whatever else pops up. Current incarnation of the machine, after the last rebuild, is an AMD Opteron 4180 with a Supermicro MB using ATI SB700 chipset - which

I don't think this is off topic since I want to use JBOD mode so that Linux can do the RAID. I'm going to hopefully run this in CentOS 5 and Ubuntu 12.04 on a Sunfire x2250 Hard to get answers I can trust out of vendors :-) I have a Sun RAID card which I am pretty sure is LSI OEM. It is a 3G/s SAS1 with 2 external connectors like the one on the right here :

I was thinking of putting a slightly bigger HD on my Linux server and would like to know the easiest way. I know that ghost works well on FAT32 partitions, but does it work on Ext3 partitions too? Id rather not reinstall if I don't have to, so any and all suggestions are appreciated. TIA Kev

Greetings all, I am in need of professional insight. I have a 2 node cluster running CentOS, mysql, apache, etc. I have on each system a fiber HBA connected to a fiber SAN. Each system shows the devices sdb and sdc for each of the connections on the HBA. I have sdc1 mounted on both machines as /quorum. When I right to the /quorum from one of the nodes, the file doesn't show up on the