similar to: sk98lin Gigabit Ethernet

I'm new to the lists so sorry about any faux pas I may have made. Also I apologize for the length, but I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from

Has anyone had any luck getting this to work? The kernel provide skge, sky2 and sk98lin modules all fail to load. I was able to download the latest version from the syskonnect.de site, and with some hacking/klduging of their install script managed to compile the module in there (a newer version of sk98lin, it seems) which recognised the card... but this isn't really sustainable 'cos new

Hi, I noticed that one of out "Centos 5" servers with an onboard "Marvell 88E8001" was showing some packet overruns. # ifconfig -a eth0 | grep "RX p" RX packets:1629537 errors:0 dropped:0 overruns:3694 frame:0 So I thought about using a driver from "elrepo" the lspci id's suggest to install the "kmod-sk98lin" driver. I yum installed

Hello List, some time ago i already asked this, in the meanwhile i did not found a solution nor i have any idea why this happens. Scenario: Every now and then i get this urgent warning: 1 Time(s): Dead loop on virtual device br0, fix it urgently! Stephen Hemminger wrote (16.08.2006 20:09) this: > It looks like a bridge ended up including itself some how. Its for me unclear when this

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am running Centos 4.3 with the 2.6.9-42.EL.jwltest.156 kernel (to get the skge module) The card is recognized, and I can see traffic when I utlilize wireshark in promiscuous mode including attempts at responding to ARP requests. 9.608260 DellPcba_b8:d7:63 -> Broadcast ARP Who has 172.20.15.25? Tell 172.20.15.27 9.608281 D-Link_87:55:06

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

Hello all, I'm not able to install CentOS in a motherboard with a onboard 3Com gigabit nic (3c904/Syskonnect). Although there's a device driver for the Syskonnect (sk98lin) in the linux kernel, the installation program is asking for this interface module. I tried to create a device disk, but without success. Maybe I'm missing some information about the modules detection by the

I am trying to connect two workstations (CentOS 3&4) directly using a straight through cat 5e cable with a crossover adapter on one of the ends. Both hosts have gigabit-capable ethernet card. According to lspci host 1 has: 03:0e.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01) and host 2 has: 05:00.0 Ethernet controller: Marvell Technology Group

Hello Hamish. I found your message just googling for Suse and sk98lin. Did you solve your problem? I had the same case and only way to restore was to change NIS driver speed settings from AUTO to 10Mb. And it was not related to OS as the same problem is in WXP ( I have dual boot, ASUS P4P800, integrated GB NIS ). Oleg.

Hi All, I have a marvel chipset for my wired laptop connection. It uses the kmod-sk98lin-10.93.3.3-1.el6.elrepo.x86_64.rpm driver at elrepo. I would like to use this driver to activate the wired connection to kickstart my laptop as I have pxe booting set upon my home network. Could anyone please enlighten me as to how to get the drivers/firmware from this package loaded on my laqptop so I

This is my first post to this mailing list, although I have been reading it for a while. Please forgive the length of my message. Also, great work! I'm trying to get Centos-3 running on an ASUS SK8V Opteron motherboard in a way that is useful for me. I've had some success, but now I'm stuck on a problem with the SATA driver. Okay, so I got it up on the network by replacing sk98lin

Hello, Please CC replies I'm not subscribed. Performance with samba and only samba degrades terribly when we use the bonding driver to aggregate two ethernet cards. Instead of a steady file copy it seems to go in spurts. If I pull out one of the network cables (doesn't matter which) performance resumes to full speed. I can pull the cable in the middle of a transfer and it will go

Hello, I am creating a configuration where a Redhat server running bridge-tools 0.9.5 will be bridging between different VLANs on the same physical interface (for example: a bridge consisting of eth1.100 and eth1.110). This physical interface is being connected to modern Cisco switches running PVST+. The Cisco switch does not like this configuration as the tags on its BPDUs are being changed

Dear All, I am having a HP xw4400 with following ethernet controller as reported by lspci Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet PCI Express (rev 02) This machine was running CentOS 5.2 without any problem. After updating the machine with yum update on 8 April, after which it is showing to be CentOS 5.3, this machine stops communicating

<I apologize if this arrives twice... I sent it first from an non-subscribed address, don't know if that'll get to the list or not --JJ> Hi folks, I have an implementation question regarding bridging on a linux box between a catalyst trunk port and a cisco 26something w/802.1q subinterfaces. So right now, there's no vlan trunking going on on the link my bridging firewall sits

We should prefer `const struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const

We should prefer `const struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const

Two problems I hope to solve: 1. The switch being used has autoneg off and has port set to 100 full duplex. 2. Many times NIC fails to come up properly during PXE boot: r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready I can't use ethtool to disable autoneg because the nic driver is built into a bzImage. The root fs is currently being mounted via nfs during pxeboot at

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com