similar to: gpxelinux.0 under a QEMU GPXE virtual boot rom?

Hi All, I've been trying to understand how to use pxechn.c32 to chain a local pxelinux menu item to a remote server which has it's own pxelinux hierarchy served via TFTP and HTTP. We have no control over DHCP next-server and filename fields so I wanted to exploit the "prefix" -p option that pxechn.c32 accepts. I spent a long time hitting my head against a brick wall until I

Hi All, I've been enjoying playing with gpxe and gpxelinux, however I have a few questions that I'd love to get some answers for... 1) Will gpxelinux support chain loading of other NBPs without hanging or is this already resolved ? 2) Why does gpxelinux take much longer than pxelinux to enumerate the UUID, MAC address, then hex IP address chop ? 3) Can gpxelinux load gpxe scripts at all

Hello. We are using gpxelinux from SYSLINUX 4.02. We recently purchased some HP Proliant BL460c G6 servers with Broadcom BCM 57711 10Gbit NICS. We have a very simple pxelinux.gpxe script compiled into gpxelinux.0: #!gpxe set use-cached 1 dhcp net0 chain http://webserver/gpxe/gpxe.php?IP=${net0/ip} The PHP script dynamically creates a config file that looks something like this: #!gpxe set

Randy McAnally wrote: > > Thank you so much, this is the kind of news I needed! > > ---------- Original Message ----------- > From: "Arends, R.R." <r.r.arends at hro.nl> > To: "Randy McAnally" <rsm at fast-serv.com> > Cc: <gpxe at etherboot.org> > Sent: Wed, 03 Mar 2010 10:10:56 +0100 > Subject: Re: [gPXE] localboot 0 hang on some

Hi, ?I happily use gpxelinux.0 in subnets where nic-embedded pxe stack can load it from a tftp server pointed by the dhcp daemon. Now I'd like to know the best way to run gpxelinux.0 in a special subnets, where no tftp trafic is allowed, http is served through a reverse proxy, and dhcp is ok. I tried "gpxe on local media (rom/iso/floppy/usb) -> gpxelinux.0" with limited success

IRC user ernini first noticed this. We both tried using gpxe/gpxelinux.0 from Syslinux-4.04-pre22. ernini used pxechain to a commercial NBP which RETs (the same as PXELINUX) and failed. Both of us had success with core/pxelinux.0 from Syslinux-4.04-pre22. For my test, I have a VM in VMware Server 2.0.2 (VMHW v7). I loaded gpxelinux.0 using the VM's built-in PXE ROM. Then I used

On Sat, Oct 24, 2015 at 6:15 PM, Michael Brown via Syslinux <syslinux at zytor.com> wrote: > Also, not a fork: http://git.ipxe.org/ipxe.git/commitdiff/8406115 A fork is a fork, regardless the reasons behind it (yes, I have some understanding in this case). iPXE is based off of forking further development as of a certain gPXE commit with some backporting of gPXE development to iPXE. --

Hi, I found this message in your online mail archive, i have found the same problem and did some research in the past on this. Maybe you would be interested to know it is a problem on any virtualisation product not just ESX. Second it is a problem in gPXE that you embedded in gPXElinux. The problem was build in gPXE after version 0.97 so any gPXElinux build a newer version has this problem. I

This is worth forwarding to SYSLINUX. On Thu, Feb 4, 2010 at 3:21 AM, Randy McAnally <rsm at fast-serv.com> wrote: > For some reason I cannot local boot (the default) from any software RAID > system (where the boot partition is linux raid). ?It hangs at "Booting from > local disk..." but never exits the pxe rom and just sits there requiring a reboot. Which RAID level are

Helle, I'm facing a strange issue with memdisk The context : syslinux 3.75 gpxelinux.0 the gpxe stript called from a menu executed through menu.c32 : #!gpxe kernel /modules/memdisk initrd=/freedos initrd /freedos The output before the freeze : /boot.gpxe. ok /modules/memdisk. ok /freedos...... ok MEMDISK 3.75 3.75 Copyright 2001-2009 H. Peter Anvin et al e820: 0000000000000000

Hi, I have a working PXE environment that chainloads gPXE and loads pxelinux.0 afterwards. As I'm also interested in doing san boot (in my case aoe) I tried loading the new gpxelinux.0 file instead of my gPXE --> pxelinux.0 setup (works) and booting from my aoe target by adding this to the default config file: LABEL doaoe MENU LABEL Continue AoE kernel sanboot.c32 append

Hi All, A while back there was some mention that gpxe may acquire the ability to receive command-line parameters. I'd dearly love if this could become a reality. It would be fantastic if we could have a pxelinux menu config as follows: KERNEL gpxelinux.0 APPEND config http://someserver.net/gpxe-for-this-box.cfg This would solve a huge number of our problems since we don't have the

Hi, I've been trying a couple of day now, but I can't seem to figure it out. On www.etherboot.org, I found the example of configuring gPXE so that it mounts an iSCSI lun and then boot from CDROM so you are able to install on the LUN. But if I use gpxelinux.0 (latest release 3.73), with sanboot.c32 like this: label sanboot2008srv menu label ^[iscsi] Windows server 2008 kernel

Hello syslinux mailing list, I've been working on a kind of system administration tool ( http://twyna.sourceforge.net/) with a colleague of mine for our Computer Science Bachelor degree internship. I hope I'm saying that right :) We use gPXELinux to boot over a web service and it's all working marvellously, except for the localboot bug. Until now we've used chain.c32 to solve

Hi Hpa and all I am confused about some function of pxelinux and gpxelinux/gpxe. 1, after I read the document (http://edgyu.excess.org/ols/2008/H%20Peter%20Anvin%20-%20x86%20network%20bo oting%3a%20integrating%20gPXE%20and%20PXELINUX.pdf), I knew there are two major module in standard gPXE, PXE BC and UNDI. And I can understand why I need to produce different boot file for different NIC from

Hello, This is my first post. Please forgive me if I am not posting this in the right location. I work at a college where we clone staff computer every now and then. We have an internal network in our office. There is a Linux NAT, DHCP, PXE server in our office separating the two networks. Internally, we PXE with images that boot into Ghost to clone computers. We do not have access to the

First let me say I'm really excited about the possibility of dynamic menu creation over http using php. When this is stable it will make maintinging some of our pxelinux infrastructure much easier. Id like to thank all involved; I'm really looking forward to the gpxe intigration. After hpa's announment for 3.70pre7 I begain testing. I dropped the new gpxelinux.0 and new c32 modules

Hello All. Yesterday I?m trying another ways but without luck. Issue still exist ? Please help. Is it possible to rewrite DHCP setting for sanboot.c32 after gpxelinux.0 load? Will be nice to have this possibility because: 1. DHCP can be ?black box?. 2. DHCP admin not available. 3. PXE server rewrite dhcp setting. I cannot boot from cdrom after pxe(gpxelinux.0) ? please help. LABEL Windows 7

I'm sure I'm doing something wrong here, but I would appreciate a pointer. I have tried to rtfm, but find the docs a little sparse wrt pxechain.comand gpxelinux.0. I am trying to setup a pxe chain server (aka chainloading?) where one of the entries on one pxe server forwards to another (cobbler, in this case). I know this works fine with traditional pxelinux.0 images, but it's

On 25/10/15 01:04, Gene Cumm wrote: > On Sat, Oct 24, 2015 at 6:15 PM, Michael Brown via Syslinux > <syslinux at zytor.com> wrote: > >> Also, not a fork: http://git.ipxe.org/ipxe.git/commitdiff/8406115 > > A fork is a fork, regardless the reasons behind it (yes, I have some > understanding in this case). iPXE is based off of forking further > development as of a