similar to: Booting Linux from Windows

I am trying to install CentOS 4.6 to a pair of 750GB hard drives. I can successfully install to either of the drives as a single drive, but when I try to use both drives and mirror the partitions, I start having problems. Anaconda crashes as it is trying to format the drives. This is what I'm trying to create: /dev/md0: 200MB, /boot /dev/md1: 2GB, swap /dev/md2: rest of the

Hi, I have a custom linux system that runs off a FAT32 usb flash disk. I use syslinux to make it bootable and load the kernel. I'm trying to boot now from a SSD SATA disk (500GB) but it's not working and I can't figure out why. BIOS show that no bootable disk were found. What I already tried (linux fdisk): 1- Creating a new DOS partition table on the SSD, a FAT32 (type b), and

Hi all I have a remote server (i.e SSH access only) which was incorrectly partitioned and I urgently need to get it up and running. It's got a 500GB HDD, but the PV is only 10GB big, so I can't add more LV's to to. P.S. This is on LVM, btw. [root at nd11176 ~]# fdisk -l /dev/sda Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders

My previous question: "can syslinux on a USBstik also boot installations on other USB devices ?" got no proper reply, so I'm now including more background detail. The new problem is that my 32bit partition of ETHOberon, only gives a proper font-size under Debian7:DVDinstaller:rescueMode, since I'm forced to use a laptop, after my previous systems were stolen. Neither gnome nor

Hi, I have a samba 4 AD, running fine but last night detected that during some minuts something was not ok,,, I have detected that during some minutes in samba 4 AD server was a high load average and some services were not working correctly, It seems that this has generated and increment of swap that is generated by samba process. Logs and info collected: Jan 11 04:44:02 server winbindd[25326]:

Hi, do you know if this memory leaks are solved with latest 4.4.x... for our environment it is difficult to upgrade to major version.... Thanks 2017-01-11 9:34 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>: > if your up to it, upgrade to 4.5.3 . > > i had these to but they are gone now, i cant recall they bugfix nr. sorry > and as extra if you upgrade, they have fixed some

Hello fellow CentOS'ers- I've got a system running CentOS 5.0. The motherboard has two onboard SATA ports with two drives attached. I installed the system on a RAID1 setup. However, I'd like to add a hotspare disk to the array. Since there are no additional SATA ports, I've installed an additional controller. After partitioning, the additional drive was easily and successfully

I have built on clean system with xen-unstable 25374 and stops with this error: gcc -O1 -fno-omit-frame-pointer -m64 -g -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes -Wdeclaration-after-statement -Wno-unused-but-set-variable -D__XEN_TOOLS__ -MMD -MF .libxl.o.d -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -fno-optimize-sibling-calls -Werror -Wno-format-zero-length

Hi all, After rebooting my CentOS 5.5 server, i have the following message: ================================== Red Hat nash version 5.1.19.6 starting EXT3-fs: unable to read superblock mount: error mounting /dev/root on /sysroot as ext3: invalid argument setuproot: moving /root failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting

Yes, I tried to dd the mbr.bin and use both --install and --stupid parameters. The FAT32 partition is bootable. Here is what I did: $ sudo fdisk /dev/sda -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal):

I use official manual from wiki.samba.org for install samba 4.6.3 (from source) with bind_dlz on bind 9.9.10 (from source too). My OS is Debian Jessie x64 8.8 netinst. I use https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 article for dynamic dhcp updates on dns zones. DHCP is working but dns updates not: i have this messages on my syslog then dhcpoffer: May 17

I have a system with 4 disk drives, two 512 Gb and two 1 Tb. It look like this: CentOS release 5.9 (Final) Disk /dev/sda: 500.1 GB, 500107862016 bytes Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes Disk /dev/sdc: 500.1 GB, 500107862016 bytes Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes ================================================================= Disk /dev/sda: 500.1 GB, 500107862016 bytes

> Yes, I tried to dd the mbr.bin and use both --install and --stupid parameters. > > The FAT32 partition is bootable. > > > Here is what I did: > > $ sudo fdisk /dev/sda -l > > Disk /dev/sda: 500.1 GB, 500107862016 bytes > 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size

I don't understand it. It was working fine a month ago. Now it just does not work. Is any one having problems with Up2date? Thanks __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail

Hi Folks, I've inherited an old RH7 system that I'd like to upgrade to CentOS6.1 by means of wiping it clean and doing a fresh install. However, the system has a software raid setup that I wish to keep untouched as it has data on that I must keep. Or at the very least, TRY to keep. If all else fails, then so be it and I'll just recreate the thing. I do plan on backing up

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

Hello, I am using fitdistr function for parameter estimation. When I use fd<-fitdistr(V2,"gamma") I get following error: Error in optim(x = c(0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, : initial value in 'vmmin' is not finite fd<-fitdistr(V2,"weibull") Error in optim(x = c(0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, :

<!-- @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> I'm having a problem mounting my new CDRW DVD in my new machine I just built. The motherboard is an Intel DP35DP, and I connected the CDRW DVD via ribbon cable into the motherboard IDE slot. Centos 5.1 is installed and functioning fine so far (other than this problem). I can't mount the

Dear all, I tried to rerun the examples given by Hyndman in otexts but keep on getting errors and I have searched through google but no solution yet. Thank you in advance for any help given. library(fpp3) library(lubridate) library(xts) library(fabletools) library(ggplot2) library(dplyr) library(gridExtra) > dput(head(new_us_retail_employment,100))structure(list(Month = structure(c(-11323,

Problem has been solved: "sudo mount -t iso9660 /dev/cdrom /mnt/cdrom -o" mounted the drive after adding "mount /mnt/cdrom" to /etc/festab. ----- Original Message ---- From: Pam Astor <pamastor at yahoo.com> To: centos at centos.org Sent: Monday, March 17, 2008 1:45:16 PM Subject: [CentOS] CDRW-DVD Mount Problem, Centos 5.1, Intel board... <!-- _filtered