similar to: Status of gpxelinux?

IRC user ernini first noticed this. We both tried using gpxe/gpxelinux.0 from Syslinux-4.04-pre22. ernini used pxechain to a commercial NBP which RETs (the same as PXELINUX) and failed. Both of us had success with core/pxelinux.0 from Syslinux-4.04-pre22. For my test, I have a VM in VMware Server 2.0.2 (VMHW v7). I loaded gpxelinux.0 using the VM's built-in PXE ROM. Then I used

Hello, I'm trying to boot with a git snapshot using gpxelinux.0 When using 3.73 everything is fine. When using 3.74pre1 and later I've got the following behavior : The boot process is stopped just after displaying this line : PXELINUX 3.74 pre1-7-gb83eb9f Copyright (c) 1994-2008 H. Peter Anvin I can reproduce the problem under vmware server 1.0, and also on a server. After testing

Hello, In my testing environment I have two VMs on ESXi 5.0. VM A = dhcp/tftp/PXE/http server, running CentOS 6.2. Syslinux 4.04 with the included gpxelinux.0. VM B = PXE boot client. If I run CentOS 6.2 also on the VM B, I can easily transfer 50+ MB/sec over http between the VMs (wget, links). Now, if I PXE boot gpxelinux.0 on the VM B, and start to download bigger initrd image over http the

Hi, first of all I would like to voice my deep gratitude to all syslinux developers for this really important software. I am using it in all my automation projects and could not manage without. Unfortunately now I stumbled upon a problem where I am out of my wits and need some help. The core problem is that HTTP transfers by gpxelinux.0 are very slow. Sadly this problem seems to be somehow

Eric Biederman has taken the work I did almost two years ago to port lwIP to Syslinux, and actually gotten it to the point where it is integrated into the filesystem stack and *working*. As such, I have pushed out a new branch "lwip" to the git repository, for testing purposes, and I have made a 4.10-pre1 prerelease which includes this code. I don't think it is ready for prime time

I'm sure I'm doing something wrong here, but I would appreciate a pointer. I have tried to rtfm, but find the docs a little sparse wrt pxechain.comand gpxelinux.0. I am trying to setup a pxe chain server (aka chainloading?) where one of the entries on one pxe server forwards to another (cobbler, in this case). I know this works fine with traditional pxelinux.0 images, but it's

Hello All. Yesterday I?m trying another ways but without luck. Issue still exist ? Please help. Is it possible to rewrite DHCP setting for sanboot.c32 after gpxelinux.0 load? Will be nice to have this possibility because: 1. DHCP can be ?black box?. 2. DHCP admin not available. 3. PXE server rewrite dhcp setting. I cannot boot from cdrom after pxe(gpxelinux.0) ? please help. LABEL Windows 7

You're all back! (yippie!). Now I can ask the question that's been nagging at me over the past month... Is booting gpxelinux.0, under QEMU, which provides it's own GPXE capable boot rom supposed to work? Or, is it a redundant (the GPXE boot room already provides the functionality of gpxelinux.0) and suicidally dumb thing to do? I've found some references to other people

Gert Cuykens wrote: > On Sun, Jun 30, 2013 at 6:12 PM, Sebastian Herbszt <herbszt at gmx.de> wrote: >> Which qemu version with which bios are you trying? > > inside a vmware player 5.0.2 build-1031769 running ubuntu 13.10 > SeaBIOS (version 1.7.2-20130528_111335-allspice) > QEMU emulator version 1.5.0 QEMU starting from v1.3.0-408-g9ee59f3 no longer supports the Bochs

Hi, I found this message in your online mail archive, i have found the same problem and did some research in the past on this. Maybe you would be interested to know it is a problem on any virtualisation product not just ESX. Second it is a problem in gPXE that you embedded in gPXElinux. The problem was build in gPXE after version 0.97 so any gPXElinux build a newer version has this problem. I

On Wed, Aug 7, 2013 at 7:26 PM, Gene Cumm <gene.cumm at gmail.com> wrote: > <snip> > > After my experiences with writing/testing pxechn.c32, I'm not > surprised that this happens. What version(s) have you used? > > One of the goals of lpxelinux.0 is to replace gpxelinux.0 for HTTP/FTP > fetch capability. This is available in versions 5.10+ and 6.00+ (BIOS

If there is anything that you think should have been in Syslinux 4.04 which isn't there please holler now. -hpa -- H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.

Gert Cuykens wrote: > On Mon, Jul 1, 2013 at 10:50 PM, Sebastian Herbszt <herbszt at gmx.de> wrote: >> Gert Cuykens wrote: >>> >>> On Sun, Jun 30, 2013 at 6:12 PM, Sebastian Herbszt <herbszt at gmx.de> wrote: >>>> >>>> Which qemu version with which bios are you trying? >>> >>> >>> inside a vmware player 5.0.2

Hello, I'm playing with gpxelinux, it's works but ... In my dhcpd.conf I have the traditional: option space gpxelinux; option gpxelinux-encap-opts code 175 = encapsulate gpxelinux; option gpxelinux.bus-id code 177 = string; subnet 192.168.0.0 netmask 255.255.255.0 { host essai { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.62; if not exist

Hi All, I've been enjoying playing with gpxe and gpxelinux, however I have a few questions that I'd love to get some answers for... 1) Will gpxelinux support chain loading of other NBPs without hanging or is this already resolved ? 2) Why does gpxelinux take much longer than pxelinux to enumerate the UUID, MAC address, then hex IP address chop ? 3) Can gpxelinux load gpxe scripts at all

Hi, ?I happily use gpxelinux.0 in subnets where nic-embedded pxe stack can load it from a tftp server pointed by the dhcp daemon. Now I'd like to know the best way to run gpxelinux.0 in a special subnets, where no tftp trafic is allowed, http is served through a reverse proxy, and dhcp is ok. I tried "gpxe on local media (rom/iso/floppy/usb) -> gpxelinux.0" with limited success

I have a situation very similar to whats in http://www.syslinux.org/archives/2013-January/019251.html The server is setup to provide info over dhcp+tftp and I'm planning on chaning that to dhcp+http so I copied gpxelinux.0 to pxelinux.0 and started failing. The client (in my case it's a hp proliant BL460c G7) manage to get gpxelinux.0 loaded but when it comes to load the config file it

I got a qemu crash and errors reported in bochs while trying to get latest core32 branch working (pxelinux): qemu: fatal: Trying to execute code outside RAM or ROM at 0xe6e8aa07 EAX=6e0c7811 EBX=000034b3 ECX=ca68b338 EDX=00000048 ESI=750e3fff EDI=00000020 EBP=d07e4988 ESP=00102324 EIP=e6e8aa07 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0028 00000000 ffffffff 00cf9300 CS =0020

Hello. We are using gpxelinux from SYSLINUX 4.02. We recently purchased some HP Proliant BL460c G6 servers with Broadcom BCM 57711 10Gbit NICS. We have a very simple pxelinux.gpxe script compiled into gpxelinux.0: #!gpxe set use-cached 1 dhcp net0 chain http://webserver/gpxe/gpxe.php?IP=${net0/ip} The PHP script dynamically creates a config file that looks something like this: #!gpxe set

I have just tried syslinux-4.00-pre5-3-g25fb8eb on Bochs + etherboot and it doesn't seem to work: PXELINUX 4.00 pre5-3-g25fb8eb Copyright (C) 1994-2009 H. Peter Anvin et al !PXE entry point found (we hope) at 9F00:0680 via plan A UNDI code segment at 9F00 len 0AB0 UNDI data segment at 9E00 len 1000 Getting cached packet 01 02 03 My IP address seems to be C0A80178 192.168.1.120