similar to: Problems with IDE RAID on specific motherboard

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

I had to replace the motherboard on one of my CentOS 4 systems and am now getting a kernel panic. When I try to boot up, I get this: Volume group "VolGroup00" not found ERROR: /bin/lvm exited abnormally! (pid 448) mount: error 6 mounting ext3 mount: error 2 mounting none switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not

Which among these three motherboard is the best supported in Linux (Centos/Ubuntu) ? Intel? Desktop Board DH55HC [ http://ark.intel.com/Product.aspx?id=42409 ] Intel? Desktop Board DP55WG [ http://ark.intel.com/Product.aspx?id=40078 ] Intel? Desktop Board DP55KG [ http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm] Also which will be a good processor , for using

I am considering buying a small, and therefore easily portable, computer as an alternative to the laptop I already have. Obviously it would not have battery, a screen, nor a keyboard etc. but more or less be an easily portable computing unit to move between offices where a keyboard and monitor(s) could then be connected. I want to run CentOS 7, later CentOS 8. The smaller, the better, however,

Hi folks, I am able to install workstation successfully on a dedicated SSD w/ GPT partition w/ UEFI boot using the latest `CentOS-8.2.2004-x86_64-dvd1.iso` from a bootable pen drive. The motherboard is ASRock x570 Gaming 4 ( https://www.asrock.com/mb/AMD/X570%20phantom%20Gaming%204/index.asp) w/ Ryzen 3600, 16G RAM, 1TB SSD in question. However, after login, when I do a DNF update (which is

Hi Folks, CentOS 5.5 x86_64 Asrock-Board with 2 USB3 plugs. Normally USB3-drive is detected. But occasionaly after "umount" next time this drive or other ones will not be detected. I have to boot the PC - than it works - till next unrecognition. On USB2 plugs all works correct. No messages in /var/log/messages nor dmesg. What happens here? Board failure - or other reasons? Some

Hello, I have the subject mentioned mb and I am trying to install centos 4.4 with sata raid enabled, but linux is not seeing the drives? I tried to load via sata raid driver, no luck there. I guess I could try legacy mode in the bios, but I was hoping there is another way around to load linux with the raid? Thanks....

Another NUC alternative: https://www.gigabyte.com/uk/Mini-PcBarebone On 2019-07-10 12:14, Mike wrote: > https://www.asrock.com/nettop/index.asp > > Asrock has a series of Intel and/or AMD based mini-pc's called the > DeskMini. > Competes in the Intel NUC space. > Plenty of power and up-to-date components, multiple ports for dual > monitor and at least two ssd's,

I recently purchased a set of ASRock Intel i5 MB/CPU combos for a budget compute cluster. Every time we load up a system and try to boot with a recent EL6/64 ISO, we get a message that reads: > This hardware (or a combination thereof) is not supported by CentOS. For more > information on supported hardware, plesae refer to http://www.centos.org/hardware Not only does the hardware

Hi, All the reviews for the AMD 890fx chipset reported that it supports IOMMU v1.2. But I cannot find any mention of that on AMD site. Does 890fx support IOMMU? Do 890fx motherboards with IOMMU exist? Does Xen support 890fx? Regards, Leonardo _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hello, I'm facing issues with a Point of View GT210/218 and nouveau drivers. I'm using ubuntu server with LXDE on top of it... *lshw -c video* output: *-display description: VGA compatible controller product: GT218 [GeForce 210] vendor: NVIDIA Corporation physical id: 0 bus info: pci at 0000:01:00.0 version: a2 width: 64 bits clock:

Hi, i just installed CentOS 7.2 on my little "server" but i get a black screen during boot. It is a Asrock Am1h-itx mainboard with an AMD 5350 CPU (onboard graphic). I created a raid 6 but i dont think thats the problem, as the boot process goes pretty far. I would even say its going until X should start, but it is a server install, so i guess there is no X. Can someone tell me what

Environment: ASRock Z86 Extreme4 - Intel i5 2500 http://www.asrock.com/mb/overview.asp?Model=Z68%20Extreme4 I have installed the latest UEFI patch(1.70) and all tests were run from a reset of everything to default. I have tested with both Ubuntu 11.10 and Fedora 16 and get the same results on both, including building xen 4.2-unstable. I bought this particular MB because it had a know working vt-d

Hello All, slightly unrelated because lightdm = epel, I know. Still, maybe someone had the same issue. When using the last two kernels, some machines give me trouble when installing Centos7 and Mate One machine is basically an Asrock board, on this I get no login screen: description: Motherboard product: AD2550B-ITX vendor: ASRock *-display description: VGA compatible

I tried to move to the latest stable kernel (4.12) so I could take advantage of my newest custom system (Intel Core I7 6-core; 64 GB RAM; MSI nVidia graphics card; 2 - 120 GB SSD; 2 - 4TB WD Black) on a UEFI Asrock mother board. I've had the machine for 3-months but I couldn't get it to work until I found out that the Nouveau driver was causing me all the 'hardware' issues. I

hi i am a complete newbie to xen, and i have still a problem with hda(hdc): lost interrupt coming from the 2.6.10-xen0 kernel on an asrock k7s8x board with an additional promise 100 controller(doesn''t get recognized anyway) an amd athlon 2400+ and 512 mb ram. an ideas? regards toby ------------------------------------------------------- SF email is sponsored by - The IT Product

Hi, amdgpu + IOMMU + SME is now working for me on 5.7, yay! But, it is broken on torvalds master, boo. On boot, depending on which exact commit I test, it either hangs immediately (with built-in driver, before starting initramfs), displays some errors then hangs, or spams the screen with many amdgpu errors. I bisected the black screen hang to: commit dce8d6964ebdb333383bacf5e7ab8c27df151218

Hi, amdgpu + IOMMU + SME is now working for me on 5.7, yay! But, it is broken on torvalds master, boo. On boot, depending on which exact commit I test, it either hangs immediately (with built-in driver, before starting initramfs), displays some errors then hangs, or spams the screen with many amdgpu errors. I bisected the black screen hang to: commit dce8d6964ebdb333383bacf5e7ab8c27df151218

I''ve seen a recent report claiming that it works: http://linux-bsd-sharing.blogspot.pt/2012/10/howto-xen-413-windows-8-hvm-domu-with.html However, in my case, with a slightly different HW configuration the story is totally different. :-（ My config: HW: I7-3770 + AsRock H77M-ITX board Dom0: Debian Wheezy stock xen (v4.1.3) + Debian stock kernel (3.2.x / 3.6.x) 64 bit version. Note that

EFI booting may hang indefinitely when no keyboard is present on a machine (or when UEFI has chosen to not init USB due to fast boot). Reproducible at least with "EFI v2.31 by American Megatrends" on an Asrock H81M-ITX board. Reason is the input draining loop near the end in efi/main.c; it calls ReadKeyStroke() as long as EFI_NOT_READY is not returned. On machines without keyboard,