similar to: extlinux boot failer

Hi all : my /dev/sda2 is ext3 format filesystem, the os moblin is installed in /dev/sda2 which is root partition, the bootloader is grub, now i want to change the bootloader to extlinux, but i came across some trouble, so i did some steps as following: 1. rpm -ivh syslinux-extlinux*.rpm 2. extlinux -i /boot/extlinux 3. i edit extlinux.conf , and put it in /boot/extlinux/, there is

Hi all: my filesystem is btrfs. /boot and / is on the same partition(/dev/sda2, format btrfs). i install syslinux as following: 1. rpm -ivh syslinux-4.00-1.i386.rpm syslinux-extlinux-4.00-1.i386.rpm syslinux-tftpboot-4.00-1.i386.rpm 2. extlinux-i /boot/extlinux. (the extlinux.sys can't be create on the directory). 3. i copy extlinux.conf to /boot/extlinux . (of course

Hi: I've been seeing intermittent build failures with the extlinux target, and I believe I've tracked it down to a VPATH issue. See this make -d log: Finished prerequisites of target file `extlinux'. Prerequisite `extlinux.o' is newer than target `extlinux'. Prerequisite `setadv.o' is newer than target `extlinux'. Prerequisite

When I try to boot my system using extlinux I get the error: EXTLINUX 3.51 2007-06-10 EBIOS Copyright (C) 1994-2007 H. Peter Anvin Could not find kernel image: linux boot: ???????????????????????????????? I've searched the archives and it would appear that extlinux can't find the extlinux.conf file.... Is there something glaring that I am missing? TIA - Phil I have a 32MB CF card

On Tue, Oct 20, 2015 at 1:08 PM, Ady via Syslinux <syslinux at zytor.com> wrote: > >> Hello, >> >> We are experiencing a strange behaviour on an embedded system (i386 PC board). >> >> The structure of our disk is the following one : >> - A 2GB fat16 partition with DOS and syslinux >> - A 100GB Ext4 partition with Extlinux an several linux images

Hello, We are experiencing a strange behaviour on an embedded system (i386 PC board). The structure of our disk is the following one : - A 2GB fat16 partition with DOS and syslinux - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram - A swap partition The system boot on syslinux to choose among Dos and Linux boot using chain. When Linux is chosen, syslinux chains to

Hello, Is it possible to install extlinux into a disk image, without being root ? It seems like extlinux --install absolutely requires the specific block device in which extlinux should be installed to be mounted. This prevents from doing an extlinux installation as non-root, which is annoying for build systems such as Buildroot [1] that build a complete Linux system from source, without being

hello, quick question about extlinux: I accidentally installed extlinux on the wrong partition (I run extlinux -i somewhere beofre mounting my usb key to somewhere). Now extlinux seems to be stuck in my main hd partition... how do I remove extlinux from the hard drive? I mean both the extlinux.sys file and the bits in the partition table... Could not find any info how to doit. Thanks. Paolo

When I issue sudo tail -f/var/log/syslog in order to try and track down an external drive problem I get the following: Jan 11 07:56:00 kernel: [17179663.076000] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). Jan 11 07:56:00 kernel: [17179663.076000] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known. Jan 11 07:56:00 kernel: [17179663.084000]

1. Which label is referred by -M, --menu-save=label Set the label to select as default on the next boot ? 2. With # grep 'label' /boot/extlinux/extlinux.conf label 1 menu label An old linux version 2.1 What will be the consequences of # extlinux -M 1 /boot/extlinux and # extlinux -M 'An old linux version' /boot/extlinux 2.2 What are

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

Hi, I'm trying to build extlinux statically, but no matter what CFLAGS or OPTFLAGS I set in the Makefiles I get bios/extlinux/extlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.24, BuildID[sha1]=ef970f59a48b226b2397b73a56e02a73b79c5f0a, not stripped I have tried adding OPTFLAGS= -static to the extlinux/Makefile as well as

hi Peter, everyone, I recently installed extlinux on my CF drive. after a few botches, it works, with menu.c32 too. Heres a few notes/observations: - menuing seems pretty sensitive to presence of tabs in extlinux.conf, unlike with pxelinux.cfg/default, Is this an oversight, or something Im misremembering ? - extlinux doesnt have the timeout after menu-choice. if I dont choose, it times out and

Hi, I am having a problem booting from a disk installed with extlinux. The exact configuration that worked with version 3.36, when upgraded to 3.50, appears to still work on the same disk. But if I zap out the disk (i.e. start from scratch again) and install extlinux, the disk fails to boot. Extlinux stops at the boot: prompt after displaying "Could not find kernel image: linux". It

make[1]: Entering directory `/home/gzp/src/syslinux-3.62-pre10/extlinux' gcc -Wp,-MT,extlinux.o,-MMD,.extlinux.o.d -W -Wall -Wno-sign-compare -D_FILE_OFFSET_BITS=64 -g -Os -I. -I.. -I../libinstaller -c -o extlinux.o extlinux.c In file included from /usr/include/linux/vfs.h:4, from /usr/include/linux/fs.h:14, from extlinux.c:43: /usr/include/asm/statfs.h:12:

Hi Folks, OK - I'm not entirely new to Linux but I'm certainly not great on the boot process. What I'm trying to achieve is to boot from an external USB HDD (not flash drive) using EXTLINUX. I've run an installation against the disk using a VM. The disk was partitioned as follows: /dev/sda1 = /boot (bootable) /dev/sda2 =/swap /dev/sda3=/ (i.e. root) /dev/sda4=/dos sda1 and 3

Hi all, This maybe a newbie question in which case I apologise hugely. While I'm not new to Linux I am new to bootloaders :-/ I would like to install a custom CD distribution on a system via serial interface (that bit I can do) but the system doesn't have a CD-ROM drive! I'm trying to copy the ISO to the disk and boot from that. So far I have done this... - Net boot the system

Alexey Orishko via Syslinux <syslinux at zytor.com> writes: > On Mon, Feb 9, 2015 at 11:58 AM, Ady via Syslinux <syslinux at zytor.com> wrote: > >> _ I doubt Syslinux can be successfully built in a "pure 64-bit" OS, but >> I could be wrong. I have always seen some form of "multilib" or >> "lib32-glibc" or similar as a dependency.

Due to delayed allocation feature on XFS filesystems, a write is not guaranteed to flushed out to the underlying file system after crash or something else - so we need to make sure that ldlinux.sys is installed correctly in the mounted filesystem. Signed-off-by: Paulo Alcantara <pcacjr at zytor.com> --- extlinux/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/extlinux/main.c

Hello-- I'm trying to use extlinux to make a bootable disk image, but I've hit a wall. I've got a partitioned hard disk image with one ext2 partition in it. I've mounted the partition through a block loopback device (/dev/loop1 on the host) and chrooted into it in order to run extlinux. Within the chroot environment, /etc/mtab says: /dev/hda1 / ext2 rw 0 0 ...and within the