similar to: [PATCH] mtools/syslinux.c: Silence warnings

This is part of some patches to support sectors > 512. Currently I'm able to boot a Ubuntu kernel but seems that mboot is not working for some reason. This patch try to fix first stage of extlinux bootloader but have some problems with ADV Signed-off-by: Frediano Ziglio <frediano.ziglio at citrix.com> --- dos/syslinux.c | 2 +- extlinux/main.c | 36

Dear all: I am trying to compile syslinux on my machine. It's a Linux From Scratch build, pure 64 x86_64 with uClibc, using kernel 2.6.26.5, gcc 4.3.2 and binutils 2.18.0. The compile fails at the following command: make[1]: Entering directory `/home/lfs/src/pkgs/syslinux/syslinux-3.72/gpxe' make -C src EMBEDDED_IMAGE=../../core/pxelinux.0 bin/undionly.kpxe make[2]: Entering directory

dos/syslinux.elf fails to build on current Ubuntu Natty (binutils 2.21) as follows: ld -m elf_i386 -T dosexe.ld -o syslinux.elf header.o crt0.o ldlinux.o syslinux.o fat.o syslxmod.o syslxopt.o setadv.o getopt_long.o bootsect_bin.o mbr_bin.o cache.o fatchain.o open.o searchdir.o libcom.a /usr/bin/ld.bfd.real: syslinux_ldlinux_size must equal the size of .payload /usr/bin/ld.bfd.real:

From: Gene Cumm <gene.cumm at gmail.com> linux/syslinux.c: Silence warnings from GCC with asprintf's attribute warn_unused_result in certain glibc versions/patches. Assign it to a variable and ignore it as the string is already tested for null before using it. Signed-off-by: Gene Cumm <gene.cumm at gmail.com> --- diff --git a/libinstaller/setadv.c b/libinstaller/setadv.c index

I am trying to build a distribution without having to be root. The SYSLINUX installer typically needs root to do loopback mounting, but if you have MTOOLS, you can use that instead. This seems to work so far: #!/bin/sh # A minimal replacement for /usr/bin/syslinux; assumes that ldlinux.sys # and ldlinux.bss are available in the current directory. You must # specify locations of mkdosfs and

From: Nicolas Cornu <ncornu at aldebaran.com> --- mtools/Makefile | 1 + mtools/syslinux.c | 59 +------------------------------------------------------ 2 files changed, 2 insertions(+), 58 deletions(-) diff --git a/mtools/Makefile b/mtools/Makefile index 0d0b1b2..c980420 100755 --- a/mtools/Makefile +++ b/mtools/Makefile @@ -9,6 +9,7 @@ SRCS = syslinux.c \

Three commits at my "for_hpa" branch (not derived from any old for_hpa branch you might have). Briefs are below. I'm still working on the DOS installer. - Shao ----- Author: Shao Miller <shao.miller at yrdsb.edu.on.ca> Date: Sat Jul 3 16:23:44 2010 -0400 win32: Use libinstaller option parser We will produce an error message if a user attempts to use an option

On Tue, 10 Nov 2015 14:51:04 +0100 Nicolas Cornu via Syslinux <syslinux at zytor.com> wrote: > From: Nicolas Cornu <ncornu at aldebaran.com> > > --- > mtools/Makefile | 1 + > mtools/syslinux.c | 59 > +------------------------------------------------------ 2 files > changed, 2 insertions(+), 58 deletions(-) Applied. Please, next time make sure you

2015-11-10 23:18 UTC+01:00, Paulo Alcantara via Syslinux <syslinux at zytor.com>: > On Tue, 10 Nov 2015 14:51:04 +0100 > Nicolas Cornu via Syslinux <syslinux at zytor.com> wrote: > >> From: Nicolas Cornu <ncornu at aldebaran.com> >> >> --- >> mtools/Makefile | 1 + >> mtools/syslinux.c | 59 >>

hello everybody, apologies if I'm missing something here Just tried to build 6.04-pre1 test version with: make bios installer and found some problems all (seemingly) related to inaccurate paths in various Makefiles. I enclose a complete patch at the end of this email, which details the problems I found and how they got fixed for me. As an example, this is the first error I got:

This set of patches add some support for sector size >512. Currently it fixes extlinux, MBR for GPT and ext partitions. Other code is unaffected. This set of patches has been tested on a read Dell machine running a beta firmware.

git://gnx.ath.cx/syslinux.git On branch for_hpa, I've got several groups of changes (listed bottom up) -chain.c32: the beginning of a DRMK loader; I still need to test this further and document/code what ones can possibly work -mtools/syslinux.c: Check to be sure fs is not NULL in case libfat_open() failed, like it can on a bad filesystem. Try to present a useful error rather than a seg

I am trying to build an RPM starting from the TAR archive. The relevant error is: make[1]: Entering directory `/tmp1/Software/rpmbuild/BUILD/syslinux-5.00/libinstaller' perl bin2c.pl syslinux_bootsect < ../core/ldlinux.bss > bootsect_bin.c perl bin2c.pl syslinux_ldlinux 512 < ../core/ldlinux.sys > ldlinux_bin.c perl bin2c.pl syslinux_mbr < ../mbr/mbr.bin > mbr_bin.c perl

I have tested with 3.31 (does not broke /dev/null) and 3.35/3.36 that broke /dev/null I verify that /dev/null exist, then compile one of the target available on top Makefile and /dev/null no more exist. Example root:/usr/src/syslinux-3.36# cat /dev/null root:/usr/src/syslinux-3.36# make .depend Makefile:274: .depend: No such file or directory rm -f .depend for csrc in syslxmod.c gethostip.c ; do

This patch builds a floppy image with contains HDT, so users of GRUB or GRUB4DOS can use HDT too, without installing Syslinux. When you compile Syslinux, this floppy image isn't build automatically. To build it, runthe following from the extracted Syslinux source: $ cd ./com32/hdt $ make hdt.img As suggested by Pierre-Alexandre Meyer, all extra files required for building the floppy

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server with Digium E1 cards ( 4 port cards). This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total

I received some large data sets in Minitab Portable Worksheet (.mtp) format and wanted to read them into R. Here is a _first cut_ at a perl script that transforms .mtp files into something that can be read by R. Comments, bug-fixes, enhancements and extensions are welcome. #!/usr/bin/perl # Convert a Minitab Portable Worksheet to an R (or S-PLUS) list structure # $Id: mtp2R.pl,v 1.1 1998/01/16

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server. This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total 4034145216, 4031118560 linkset siuc, link

Hi, I'm setting up NUT on a raspberry pi 4, following the guide here: https://melgrubb.com/2016/12/11/rphs-v2-ups/ OS version: Raspian Buster NUT version: 2.7.4.8 Installed via: apt package install Device: Legrand Keor Multiplug connected via USB The problem I am experiencing is that *NOTIFYCMD* never runs. I can connect to the device via *upsc*, and I receive WALL messages when I connect

Hi, It looks like KDE's file manager Dolphin doesn't support MTP under CentOS 7. When I plug in an MTP device like my Nikon camera or an Android phone, Digikam shows its content OK, but Dolphin seems to ignore it. For now, my custom CentOS 7 + KDE desktop meets about 99 % of my needs. Now I've decided to tackle the remaining 1 %. Yesterday for example, I managed to correct the