similar to: iSCSI target in CentOS 4?

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Hello Sir, (This applies to the RH8.0 supplied syslinux 1.75-3 and the upgraded tftp-server-0.32-1 from RH Rawhide) I'm having fun remotebooting my ViA EPIA box (an ITX form-factor 800MHz ViA C3 semi-embedded pc), and have landed on pxeboot as the 'best tool for the job'. Right now I have it working, but the documentation found elsewhere on the web has confused me. Specifically,

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

Hi all, Another FYI-mail (and just to verify that I'm not going insane here); I recently purchased an ASUS M3A78-EMH HDMI -board with a tri-core Phenom. This is a small uATX-board with all the garnish integrated motherboards are supposed to come with, and fairly well supported in CentOS 5 and other modern distros. When I installed it (~2 months ago) the NIC was not supported; Ethernet

Hi all, I'm wondering if I'm running into some dependency issues on my CentOS5 test-machines. I've installed with a fairly minimal package set, updated, removed old kernels and am now experimenting with iscsi and gfs. I think I need kmod-gfs to get gfs -support, but there is only a version that suits the base-kernel, 2.6.18-8.el5. " [root at node02 ~]# yum install kmod-gfs

Hi people, I ran into one of these silly issues I'd like to share as I think the reason behind it may be a flaw in the current initrds. The setup; Dual-Xeon Intel-chipset motherboard. SATA-disk attached to ICH, onboard Adaptec SCSI-controller. Installed system, updated packages, no problems. Basic, non-LVM partition setup - OS-disk is /dev/sda, single filesystem-partition /dev/sda1 is

CentOS 4.3 (SMP, x86_64, Athlon64 X2) with all pre-4.4 release updates applied. Since I ran into the Yum issue at the previous upgrade, I first did yum upgrade to get the list of packages (6 to install, 206 to update). I then did yum upgrade yum (which passed without issues) yum upgrade sqlite (which passed without isseus). Fairly certain that yum now works correctly, I wanted to just do

Hi all, I've upgraded my mysql-installation from the previous 4.1.12 version to the new 4.1.20 version, and I've found that a daemon I'm using suddenly can't log into the database anymore. I've verified the problem with the mysql command; [root at sciream ~]# mysql -upostfix -p mysql Enter password: ERROR 1045 (28000): Access denied for user

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions -

Hi list, I'm having one of those 'I'm stupid' -problems with LVM on CentOS 5.2. I've been working with traditional partitions until now, but I've finally been sold on the theoretical benefits of using LVM, but for now I only have a huge pile of broken filesystems to show for my efforts. My scenario; I attach a disk, either over USB or iSCSI. I create a PV on this

Hi all, Same system as my previous mail - Asus P5N32-E SLI motherboards, CentOS 4 x86_64. The kernel-supplied forcedeth driver works in kernel-smp-2.6.9-55.0.9.EL (both with and without acpi=off), but after upgrading to kernel-smp-2.6.9-67.0.4.EL, networking does not start. After trying dhcp, ifconfig reports 17 dropped TX packets (all other counters are empty). Ethtool reports the same

Hi all, I'm trying to troubleshoot my way thru a ACPI-issue on several machines with the Asus P5N32-E SLI motherboard (S775, Nvidia 680i chipset) http://www.asus.com/products.aspx?l1=3&l2=11&l3=397&l4=0&model=1459&modelmenu=1 This is CentOS 4 x86_64, and appears on all tested kernels, including kernel-smp-2.6.9-67.0.4.EL My symptoms are that the machine won't

Hi all, I'm running a pretty updated CentOS4 x86_64 server (Still on kernel 2.6.9-42.0.2, but appart from that fully up to date against the official repos) with a USB-disk attached (the USB-disk is a 750G Seagate disk in a Seagate enclosure) over a USB hub. I've noticed several times that after longish periods of activity, the disk drops out (log from last time, below). In this case,

Hi, (This is a recend, as the original post was refused by the CentOS moderators due to the size of the X-log file) I''ve just installed the CentOS 4.0 RC1 for x86_64 -set on my new Nforce4-based system with a PCIe GF6600-card. When installing, the screen becomes garbled as the system enters X mode, but installing with ''linux text'' works, until the system reboots and

Hi, all. I want to use grey list in mail server, currently, i use postgrey to implement it. Any other recommended software? Thanks very much. ----- Best Regards. Zhang Huangbin - OpenBSD 4.2 -release, i386. - RHEL 5.1

I'm having trouble updating my iscsitarget modules, and it seems to be related to a naming convention mixup? here's the output of the build command: [root at vmhost ~]# rpmbuild --rebuild --sign iscsitarget-0.4.14.96-0.amherst.src.rpm Installing iscsitarget-0.4.14.96-0.amherst.src.rpm error: Failed build dependencies: kernel-devel = 2.6.9-42.0.10.ELlarge is needed by

Hello, Need anyone's help regarding issues I encountered during make on iscsitarget-1.40.20 which I get from "svn co https://iscsitarget.svn.sourceforge.net/svnroot/iscsitarget/trunkiscsitarget" checkout revision 481 Issues where found below after a series of my command, as shown: [junix at thesisQRMproject iscsitarget]$ make *cc:

I''m currently writing an app that provides a Web Service. I''ve got a model Header and an associated has_one HeaderImage and I''m trying to find a way to make this data available. Defining a normal API: api_method :header, :expects => [{''id'' => :int}], :returns => [Header] Only returns the header object without associations, has anyone got

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Hi everyone, I need some help to setup my configuration failover system. My goal is to have a redundance system using Xen + DRBD + Corosync + Pacemaker On Xen I will have one virtual machine. When this computer has network down, I will do a Live migration to the second computer. The first configuration I will need is a crossover cable, won''t I? It is really necessary? Ok, I did it. eth0