similar to: Syslinux 3.85 chain.c32 problem solved

Syslinux 3.85 is a bug fix and minor new feature release. The biggest change is undoubtedly that gPXELINUX is now considered feature complete, and should be able to be a drop-in for PXELINUX for all uses. Special thanks to Intel Corporation, my current employer, for their support for my Syslinux work. Changes in 3.85: * gPXELINUX: updated to gPXE 1.0.0. gPXELINUX can now do NBP

Hi all, I have a similar issue with Thomas Mieslinger mentioned in the previous mail. The difference is here isolinux is used instead of gpxelinux.0. I use isolinux 3.85, and "chain.c32 hd0" to boot the local Debian Lenny Linux on VMWare workstation 6.5, it fails. If I replace it with isolinux 3.84, it works. Hope this report helps. Steven. -- Steven Shiau <steven _at_ nchc org

It say to give a copy of dmidecode or sysdump if I need to use localboot -1 pxelinux.0 worked with localboot 0 but gpxelinux.0 didn't it needed localboot -1 This was on my hp machines

Hello, just tried gpxelinux-4.00-pre36, but don't receive any output console when running disk.c32 or chain.c32. Could you please have a look in the sysdump I mailed earlier. Thanks in advance Thomas -- Thomas Mieslinger IT Operations Core Infrastructure Services Telefon: +49-721-91374-4404 E-Mail: thomas.mieslinger at 1und1.de 1&1 Internet AG Brauerstra?e 48 76135 Karlsruhe

Hello, I try to recompile syslinux-4.00 pre31 on RHEL5 with gcc-4.1.2 and nasm 2.07. Because I'm looking for information about that gpxelinux->chain.c32 hd0 boot problem I added -DDEBUG=2 to com32/lib/Makefile I get: objdump -h pxelinux.elf > pxelinux.sec perl lstadjust.pl pxelinux.lsr pxelinux.sec pxelinux.lst objcopy -O binary pxelinux.elf pxelinux.raw ../lzo/prepcore

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

Trying again since the mailing list says I have a 'suspiscous header'. I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot,

Randy McAnally wrote: > > Thank you so much, this is the kind of news I needed! > > ---------- Original Message ----------- > From: "Arends, R.R." <r.r.arends at hro.nl> > To: "Randy McAnally" <rsm at fast-serv.com> > Cc: <gpxe at etherboot.org> > Sent: Wed, 03 Mar 2010 10:10:56 +0100 > Subject: Re: [gPXE] localboot 0 hang on some

I was trying out the INCLUDE command within menu.c32 (via pxelinux, actually gpxelinux) and noticed that it's broken. The symptom is that the text is included, as expected, but the subsequent text from the including file is wrong. In some cases it actually pulls from above the INCLUDE leading to the INCLUDE being reprocessed (an infinite recursion). (The recursion seems to stop after 20-30

Hello syslinux mailing list, I've been working on a kind of system administration tool ( http://twyna.sourceforge.net/) with a colleague of mine for our Computer Science Bachelor degree internship. I hope I'm saying that right :) We use gPXELinux to boot over a web service and it's all working marvellously, except for the localboot bug. Until now we've used chain.c32 to solve

This is worth forwarding to SYSLINUX. On Thu, Feb 4, 2010 at 3:21 AM, Randy McAnally <rsm at fast-serv.com> wrote: > For some reason I cannot local boot (the default) from any software RAID > system (where the boot partition is linux raid). ?It hangs at "Booting from > local disk..." but never exits the pxe rom and just sits there requiring a reboot. Which RAID level are

Hello List, I have been told to get linux running on two HP DL360G4p machines (ancient rackmount xeon stuff). Unfortunately, while isolinux boots fine from CDROM, and extlinux can boot a USB stick, I cannot get extlinux to boot from the CCISS hard disks (two disks in hardware raid 1 configuration). I searched on google a lot, and found (very old, many years ago) messages saying these

Hi, first of all I would like to voice my deep gratitude to all syslinux developers for this really important software. I am using it in all my automation projects and could not manage without. Unfortunately now I stumbled upon a problem where I am out of my wits and need some help. The core problem is that HTTP transfers by gpxelinux.0 are very slow. Sadly this problem seems to be somehow

I have a lab in which I keep all my computers set to try network boot first that way it is easy to put a file in pxelinux.cfg of the mac address of a faulty machine and have it build itself or run diagnostics. Up till recently I used pxelinux.0. I have been trying out gpxelinux so that I can use its http fuctionality to download initrd images faster to boot. I just discovered that its local boot

Hi All, I'm trying to setup gpxelinux instead of pxelinux, my goal is to fetch the configuration files and images via http. additionally, I want to setup all servers to boot by default from PXE - the idea is that I can control whats booted in another place, and I don't need to physically (or virtually) go through menus or do stuff on the machine. my basic proof of concept is: isc dhcp

Hello all, I'm thinking about wrapping up a 3.70 release, even though gpxelinux.0 is technically not feature-complete. I'd like people's opinion on it. -hpa

IRC user ernini first noticed this. We both tried using gpxe/gpxelinux.0 from Syslinux-4.04-pre22. ernini used pxechain to a commercial NBP which RETs (the same as PXELINUX) and failed. Both of us had success with core/pxelinux.0 from Syslinux-4.04-pre22. For my test, I have a VM in VMware Server 2.0.2 (VMHW v7). I loaded gpxelinux.0 using the VM's built-in PXE ROM. Then I used

Hello, I'm playing with gpxelinux, it's works but ... In my dhcpd.conf I have the traditional: option space gpxelinux; option gpxelinux-encap-opts code 175 = encapsulate gpxelinux; option gpxelinux.bus-id code 177 = string; subnet 192.168.0.0 netmask 255.255.255.0 { host essai { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.62; if not exist

Hi All, I've been enjoying playing with gpxe and gpxelinux, however I have a few questions that I'd love to get some answers for... 1) Will gpxelinux support chain loading of other NBPs without hanging or is this already resolved ? 2) Why does gpxelinux take much longer than pxelinux to enumerate the UUID, MAC address, then hex IP address chop ? 3) Can gpxelinux load gpxe scripts at all

I'm sure I'm doing something wrong here, but I would appreciate a pointer. I have tried to rtfm, but find the docs a little sparse wrt pxechain.comand gpxelinux.0. I am trying to setup a pxe chain server (aka chainloading?) where one of the entries on one pxe server forwards to another (cobbler, in this case). I know this works fine with traditional pxelinux.0 images, but it's