Displaying 20 results from an estimated 200 matches similar to: "PXELINUX output 3.85 vs. 4.00"
2009 Sep 02
3
fsc branch and Bochs
I have just tried syslinux-4.00-pre5-3-g25fb8eb on Bochs + etherboot and it doesn't seem to work:
PXELINUX 4.00 pre5-3-g25fb8eb Copyright (C) 1994-2009 H. Peter Anvin et al
!PXE entry point found (we hope) at 9F00:0680 via plan A
UNDI code segment at 9F00 len 0AB0
UNDI data segment at 9E00 len 1000
Getting cached packet 01 02 03
My IP address seems to be C0A80178 192.168.1.120
2010 Mar 02
2
chain.c32 "Chainboot failed!"
Hi,
I am using syslinux-4.00-pre24, -pre27 and -pre31. chain.c32 fails for pre27 and pre31 for particular configs ... shown below.
1) works on pre24, fails with error message "Chainboot failed!" for pre27 and pre31
LABEL local
MENU DEFAULT
MENU LABEL Local Boot ... (skip PXE boot)
KERNEL chain.c32
APPEND hd0 0
2) works on all three.
LABEL local
2005 Dec 19
2
Network Loading of freeBSD
I have spent a couple of days and quite some time during the nights googling
and experimenting in pursuing subject objective and I feel like failing, if
I cannot get competent help:
My objective: boot a FreeBSD-package over the network by Systems lacking
HW-Support for PXE
My Testconfiguration:
Server IBM-PC300
Client Siemes Fujitsu ErgoPro with freeBSD6.0 installed
Network card in
2011 Aug 23
2
Where is WillPaginate::Finders ???
Hi All!
It''s been a while since I had to ask for help, but I''m back!
I''ve finished beta testing my big app and started the transition to
production. Everything went fine and the production version was working
till I was asked to add another model :-( (Almost a year of beta
testing and they only come up with it after moving to production :-D )
I successfully
2010 Mar 04
2
recompiling syslinux 4.00pre31
Hello,
I try to recompile syslinux-4.00 pre31 on RHEL5 with gcc-4.1.2 and nasm
2.07.
Because I'm looking for information about that gpxelinux->chain.c32 hd0
boot problem I added -DDEBUG=2 to com32/lib/Makefile
I get:
objdump -h pxelinux.elf > pxelinux.sec
perl lstadjust.pl pxelinux.lsr pxelinux.sec pxelinux.lst
objcopy -O binary pxelinux.elf pxelinux.raw
../lzo/prepcore
2011 Sep 13
3
Accessing Rails helper method with_output_buffer
Hi all,
I cannot figure out how to correctly use the with_output_buffer helper
method (located in ActionView::Helpers::CaptureHelper) inside a custom
FormBuilder.
Below follows a simplified example.
I''m trying to achieve the following behavior in an ERB as suggested in
the form_for helper docs in the Rails source:
==========
<%= form_for @object, :builder => MyFormBuilder do
2007 Nov 14
2
PXE in wonderland
Hi,
I have collected a bunch of old PII PCs that I am trying to PXE boot.
There NICs are old and so I use etherboot floppy to emulate a native PXE
boot. I have configured tftp, dhcpd, pxelinux, and all the other stuff.
Everything works fine till pxelinux start booting. Then it stucks after
printing the IP row.
--------------- pxelinux output -----------------------
PXELINUX 3.10 2005-08-24
2005 Mar 06
0
memdisk and booting DOS images
Hello,
I seemed to have encountered a problem with memdisk that I have seen
before when I was playing around with USB device booting at one time.
Here's the scenario: Take fx a image of a PC DOS bootable diskette.
Boot the image via memdisk. This should boot fine if you use the
built-in motherboard ide controllers (ide0,ide1).
Now install a PCI IDE controller and put one IDE disk on the
2011 Sep 14
2
Slaves under Squeeze
hi,
I recently upgraded my Debian Lenny system to Squeeze, and have
been happily running nut as a MODE=standalone system talking to my
Cyberpower 1500 avr lcd via the usbhid-ups driver for a couple of weeks
or so. No problems.
Now I'm trying to hang another machine off the same ups as a slave,
and it isn't working. The problem I'm getting is best illustrated by
what
2010 Jul 12
4
Remote-Party-ID party=called
Hello list,
using Asterisk 1.4.30.
I want to set the SIP-header Remote-Party-ID to display the name of the
calling party on my phone in stead of the number.
This is the dialplan :
exten => 10,1,NoOp()
exten => 10,n,SIPAddHeader(Remote-Party-ID: "eric"
<sip:10 at 192.168.1.150>;party=called )
exten => 10,n,Dial(SIP/test2)
This is what the CLI shows :
/[Jul 12
2014 Oct 07
1
Grandstream GXP2160 + SRTP
Hello,
I am trying to setup a Grandstream GXP2160 IP-phone with secure calling
(SRTP).
Secure signaling SSIP for registration is working great !
I follow this guide :
https://wiki.asterisk.org/wiki/display/AST/Secure+Calling+Tutorial
But when I try to make a call with SRTP, I get stuck. There is an
initial INVITE which is anwered with a 401. There should follow a new
INVITE with a nonce,
2007 Sep 25
1
Weird disconnection problems
Hi
I'm running Samba 3.0.24 both on a Debian etch and a Ubuntu 7.04 both as
PDC's and I'm experiencing some really strange disconnection issues.
i have net mapped a share to p: and after doing som copying of files all
of a sudden it says that the p: drive and i can't acess it for a couple
of seconds and then it shows up again.
Browsing through the logs i can't really find
2012 Feb 09
4
Create Virtual Machine via HTTP or FTP
Hi,
I'm trying to create a Virtual Machine using Network Install mode (I
tried HTTP and FTP).
The HTTP/FTP server where the installation files are located is the Host
Machine.
The URL that I'm using is: http://192.168.1.104/inst and the Automatic
detect option detects the OS without problem.
When the installation starts I got an error:
Unable to retrieve
2018 May 23
0
Unable to connect VMs to a bridge over bonded network on Debian 9 (works fine on Centos 7.4)
Hi,
Sorry of this is the wrong list, trying to find some help.
I am trying to set up 2 KVM hosts using Debian 9 (connecting to a 3 node
Centos 7.4 gluster cluster) To get the bandwidth I have bonded 2 NICS each
end. However while the network works fine for the Debian VM host the VM
guests cannot connect/get an IP using DHCP connecting to br0. (Same setup
on the Centos end works fine however)
2006 Aug 23
2
Error was Permission denied
Greetings,
I have tried a few days on an off to get samba to work, but need some help.
Samba version Samba 3.0.23a-1.FC5.1
Linux Fedora 5 (localhost) User: dsmith 192.168.1.104
Windows XP SP2 with lastest updates (T2385) User: dan 192.168.1.100
Linksys 8 port router
I found a couple problems with the checklist and fixed them. A
couple problems I wasn't able to solve.
Here are the
2003 Apr 11
0
nobody owned smbd processes are not ending
I am running the latest release of Samba on RH8 (2.2.7-5.8.0). I use it
primarily to provide master browse functionality, and to act as a print
server (using CUPS 1.1.17-0.2).
I am watching a TOP session, after printing from a W2K workstation. (I
restarted Samba before I did this). There is now one smbd processed
owned by nobody, which is not ending (and the print has completed). In
my
2010 Feb 03
0
permissions on Samba share mount point in RHEL 5
Dear friends,
I am straight away coming to the point I have a samba
server<http://www.linuxforums.org/forum/#>and I have created a public
share (with full permissions for every user in
network) and I have mounted it on a RHEL machine. The problem is that
permissions on the mount change when I restart the samba server and other
thing is that when any user on rhel machine creates any folder
2003 May 22
0
MGCP NOTICE message and WARNING messsage
> Hello all,
>
Can someone help me on the problem which I have on MGCP phone test . I test
mgcp - asterisk- zap. But I got several NOTICE message from rtp.c.
> NOTICE[20501]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support
> incomplete. Turn off on client if possible
>
> -- Endpoint 'aaln/1@VG101-1-1' observed '9'
> NOTICE[20501]: File rtp.c,
2002 Aug 08
1
Win 9x printer problem
I am continuing to struggle with a strange SAMBA Printing problem. Here
are the details:
1) NT based clients can log on as guests or as users and can print in
either case with no problems.
2) Windows 9x clients can log in as either guest or as users and can access
shares with no problems.
3) Windows 9x clients attempting to print directly to the SAMBA printer
hang the print process and
2009 Feb 06
2
smbtree Error NT_STATUS_HOST_UNREACHABLE
Hi,
I've been running samba on a linux machine (dslkayak) to share a
folder and a printer with several windows machines on a home network
for a couple of years without problems.
I've recently added a second linux machine (ps3ydl) to the network,
but I cannot access it from any other machines on the network even
though it can access the other network shares.
There error I get is: