similar to: Append boot device to /proc/cmdline

If you cd to the /menu directory and type 'make' it fails with this error: libmenu/help.c:17:57: error: loadfile.h: No such file or directory libmenu/help.c: In function 'showhelp': libmenu/help.c:99: warning: implicit declaration of function 'loadfile' make: *** [libmenu/help.o] Error 1 The problem can be averted by adding the proper header location the file

Hi all! Is there a way to asterisk-gui to allow underline (as such cpd_tom) in Names? It allows to [di]enable alphanumeric, but not underline noway. Why such restriction in asterisk-gui if even asterisk users.conf allows (and works fine) it? Thank you, Tom Lobato

I have updated syslinux in Parted Magic's test version to the 5.10 release. With 4.06 I booted plop like this: LINUX /boot/plpbt/plpbt.bin Now it says /boot/plpbt/plpbt.bin... ok Booting kernel failed: Invalid argument Other "extras" like IPXE, HDT, memtest86+, chntpw, Super Grub Disk, etc... all work with 5.10. Revert to 4.06 and plop works again. Is this a problem with syslinux

Same CD. Any Linux distribution without the 5.X series boots on this machine. We can use 4.06 and it boots just fine. It's not the computer's hardware. Like I said, we can take the CD out of the GX620 and place it in the 9010 and it boots. Put 4.06 on the CD, and they both boot. Patrick On Sat, Jul 6, 2013 at 7:18 AM, Gene Cumm <gene.cumm at gmail.com> wrote: > On Fri, Jul 5,

DEar list members, I am currently using Sweave with LaTeX which is great. I can use xtable for formatting outp of tables but I have a problem setting the number of decimals in xtables when used with dataframe. I have found an example on the net ith matrix and it works. For example this works : > > tmp <- matrix(rnorm(9), 3, 3) > > xtmp <- xtable(tmp) > > digits(xtmp)

We have tried compiling the binaries our self and using the pre-compiled in the syslinux tar ball as well. It just locks up with the text we provided. The problem is booting from CD, booting from USB works. I suspect the problem is in isolinux.bin. The CD only fails on this one machine. It works on everything else we tried. 4.06 worked without any issue on this same machine. Parted Magic has been

System: Dell OptiPlex GX620 (Both BIOS A10 and A11 affected) Medium: Physical CD-RW Observed: ISOLINUX 5.11 0x51D1AE48 ETCD_ is the only line displayed on-screen. A flashing cursor trails at the end of the line. Escape key does not return boot: prompt. Line1 of syslinux.cfg: DEFAULT vesamenu.c32 Note: Reverting to syslinux-4.06 allows for successful booting on the same system. Patrick On Tue,

Hi, I''m new to shorewall and iptables. I installed shorewalls ver. 2.2 two days ago and it''s working now, but I have some questions concerning pppoe. I have my ISP''s connection to internet trough PPPoE over an ethernet card. On the ethernet card I have a static IP and I have access to all other ISP''s clients wich are in the same subnet (it''s a small

Hello, I am developing a game engine which will support Ogg Vorbis playback. If I were to use LibOgg and LibVorbis, would I then have to release my own product under BSD, thus requiring anyone who created games with it to do the same and reference Xiph.org in their game's credits? While I can definitely include a license file with my library, enforcing my own end-users to do the same would be

>>Could you do screen captures of the output of meminfo.c32 when booting ISOLINUX-4.06 as a CD and SYSLINUX-4.06 as a USB? The results both match for booting 4.06 via CD and USB: SYSLINUX 4.06 EDD 2012-10-23 boot: meminfo.c32 INT 15h = f000:f859 DOS RAM: 639K (0x9fc00) INT 12h: 639K (0x9fc00) INT 15 88: 0xfc00 (64512K) INT 15 E801: 0x3c00 (15360K) 0xbee8 (3127808K) 0

I'm not exactly sure what you need. Is this it? ISOLINUX 4.06 0x513e88f5 isolinux: Starting up, DL = 82 isolinux: Loaded spec packet OK, drive = 82 isolinux: Main image LBA = 0000011D isolinux: Main image read, jumping to main code... I created an iso with isolinux-debug.bin as the boot loader and booted it on that machine. If this is not what you are looking for, what are correct steps?

Hi - I am not an expert at shell script writing. If /proc/cmdline looks like option1 option2 ... ks=http://192.168.1.8/ks/ks.cfg option3 option 4 ... How can I get the 192.168.1.8 out of this cmdline. THanks, Jerry

--- appliance/init | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/appliance/init b/appliance/init index f4f6333..5d43c71 100755 --- a/appliance/init +++ b/appliance/init @@ -75,21 +75,6 @@ $UDEVD --daemon #--debug udevadm trigger udevadm settle --timeout=600 -if grep -sq selinux=1 /proc/cmdline; then - mount -t selinuxfs none

This same system boots with syslinux-4.06. Let me know if there is any further info you need. We tried syslinux-5.11-pre5 as well. Patrick Verner partedmagic.com

On Tuesday 22 March 2016 19:05:21 Richard W.M. Jones wrote: > --- > appliance/init | 30 +++++++++++++++--------------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/appliance/init b/appliance/init > index f4f6333..5d43c71 100755 > --- a/appliance/init > +++ b/appliance/init > @@ -75,21 +75,6 @@ $UDEVD --daemon #--debug > udevadm trigger >

Hi, I'm successfully using PXELINUX for booting several flavors of Linux using the LABEL/APPEND syntax in the config file. But I don't want to allow the users to append additional kernel command line arguments like "init=/bin/sh". Scanning the docs and the mailing list archive I could not figure out how to do this. Can anyone give me a hint? Thanks, Thomas

I have a grub.conf (below) with pci=nomsi, also /proc/cmdline and dmesg | more do not show the pci=nomsi. How can this be? there are no strange characters after quiet and before pci=nomsi. It was edited with vi. What can I do to get this parameter in my kernel boot line. Jerry ----------------- default=0 timeout=5 splashimage=(hd0,0)/boot/grub/splash.xpm.gz hiddenmenu title CentOS

Hiya. Is it possible to share profiles between different users with Samba 3.0CVS acting as a PDC, and XP Workstations? All users are using the same profile share; the concept is that there's an "Admin" user which can read/write to this, so I can setup things such as Internet Explorer settings / Desktop/Start Menu items / color scheme, etc..., and all other users only have read

Okay, but you’d have to be able/willing to employ a dedicated IP to that, plus run Icecast as root. What are the negative technical implications of running icecast on port 8000 (suitable for most users) and then running a reverse proxy to accommodate public wifi with port restrictions? > On Apr 8, 2019, at 3:31 PM, Yahav Shasha <yahav.shasha at gmail.com> wrote: > > Just bind

In my case the rest of my server was apache/CPanel, so I don’t have a choice in the matter. Does it matter if the web interface is completely inaccessible, as would be a side effect of the alias approach? > On Apr 7, 2019, at 2:29 PM, Yahav Shasha <yahav.shasha at gmail.com> wrote: > > Apache is a terrible choice if youre going to revproxy, specially an http stream, youll have