similar to: INCLUDE is not working

Hello, A couple of months back there was this message on the list. http://syslinux.zytor.com/archives/2010-October/015459.html I have exactly the same result on just a few types of machines. Acer Tavelmate 8372 and 5742 InsydeH2O Bios v1.05 Broadcom UNDI PXE 2.1 V 14.0.8 It started after I upgrades pxelinux.0 to version 3.86 Versions tested and got the recursing: 3.86, 3.85, 3.84 and 3.83 On

Sorry for makeing a new post, but I already erased my old mails. In the following I describe my Server-Situation (Sorry for my bad english) * I have a eisfair server http://www.eisfair.org with version 1.6.1 (newest) * I have a ISC-DHCPD 3 Server running * I have a TFTP Server running http://www.kernel.org/pub/software/network/tftp/ * I have Samba installed and a DNS Server is running My

Help everyone... I need to track the spread of a BIOS bug. One symptom of this particular BIOS bug is that with pxelinux.0 from Syslinux 3.83-pre9, "localboot 0" works, but *if pxelinux.0 chainloads itself first*, then "localboot 0" *does not work*. I have reasons to believe this is a fairly widespread bug among newer hardware (made in the last two years or so), and it is

Randy McAnally wrote: > > Thank you so much, this is the kind of news I needed! > > ---------- Original Message ----------- > From: "Arends, R.R." <r.r.arends at hro.nl> > To: "Randy McAnally" <rsm at fast-serv.com> > Cc: <gpxe at etherboot.org> > Sent: Wed, 03 Mar 2010 10:10:56 +0100 > Subject: Re: [gPXE] localboot 0 hang on some

Hello I'm working on my RIS server; I got a problem when I use pxelinux.0 to load setupldr.exe from windows XP 32bits (both home and corporate) Here is how I configure a working server, then how to modify it to reproduce the bug: ========================= I suppose you got -a dhcp server configured to load pxelinux.0 to client computer. -a working tftp server (mine is tftpd-hpa, with a rule

Hi, OK. I build syslinux-6.02-pre6 from https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from experimental): root at jessie: ~# cd /tmp root at jessie:/tmp# wget https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz root at jessie:/tmp# tar xfz

Hello, i've found a strange bug, here is my situation: - all of our computers makes a pxeboot request by default dhcp server is configured: option option-128 code 128 = string; option option-129 code 129 = text; option space PXE; option PXE.mtftp-ip code 1 = ip-address; option PXE.mtftp-cport code 2 = unsigned integer 16; option PXE.mtftp-sport code 3 = unsigned

Summary ======= I am having trouble with com32 API call AX=0014h [3.10] Local boot [PXELINUX, ISOLINUX] Input: AX 0014h DX Local boot parameter Output: Does not return My observation is that is returning from the call and is not localbooting the system. Detail ====== I am using a com32 program to configure some hardware before I boot from the local

Hello I just tested my pxelinux installation with 5.00-pre6. For the installation I did first the same steps as I did with 4.05. I copied the following files out of the archive into my /tftpboot folder: syslinux-5.00-pre6/core/pxelinux.0 syslinux-5.00-pre6/com32/menu/menu.c32 syslinux-5.00-pre6/memdisk/memdisk With only this files, it was not working and I also had to copy this two

I've been working with Matt Burgess here on this problem, and have found the following: syslinux 3.08-pre10 ? broken >>> config.inc:max_cmd_len=255 syslinux 3.08-pre11 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.08 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.09-pre1 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.09-pre2 ? broken

Hey all, I recently updated to syslinux 3.83, I am getting machines rebooting or locking after loading PC DOS. Most notably with Hitachi's Disk Fitness Test (http://www.hitachigst.com/hdd/support/download.htm#DFT) Version 4.16. At first it was a trickle, and now it seems I am having the issue with more hardware. I downgraded to syslinux 3.81, and everything is happy again. The Current

i am trying to use chain.c32 with isolinux to load WinPE/BartPE/etc and I can not get it to work. I have tried with the simple.c32, and just from the isolinux prompt. I have tried 3.32-pre6, 3.20, and jumped back and tried 3.08. All configurations fail with 'Cannot read Master Boot Record'. The boot sectors are known to be good, and are known to work with chain.c32 with pxelinux.

Hi, if you can provide a prepared src tarball like you do for releases, I can test. But I still cannot build from git source (as you may remember). -- Regards, Igor

Hi, I am using syslinux-4.00-pre24, -pre27 and -pre31. chain.c32 fails for pre27 and pre31 for particular configs ... shown below. 1) works on pre24, fails with error message "Chainboot failed!" for pre27 and pre31 LABEL local MENU DEFAULT MENU LABEL Local Boot ... (skip PXE boot) KERNEL chain.c32 APPEND hd0 0 2) works on all three. LABEL local

Hello, Starting version PXELINUX 3.83 2009-10-05, i am not able to boot anymore using "localboot 0" entry. It show "" Booting from local disk... """ Then loop on the network boot of the interface then after a few try show the message: """ It appears your computer has less than 268K of low ("DOS") ... Boot failed: press a key to

Hi, While trying to ./configure libguestfs on gentoo fails since it requires feboostrap or deboostrap Can this be made optional and not as necessary requirement, since there are still many useful uses for libguestfs besides bootstrapping, which can be used on distros like gentoo. Thanks Alex

Hello, i've got a problem with boot pxe on pc, all my pc works fine except in a room where all the same pc doesnt works : my configuration (dhcp tftp etc...) works fine also here is a part of my tftpboot directory ghost/ memdisk menu.c32 pxelinux.0 pxelinux.cfg/ ./ghost: ghost288.IMA ghost_geii_101.IMA ghost_MM.IMA ghost_MM.IMA.old ./pxelinux.cfg: default here is a part of my default

Our site has many Dell OptiPlex 790s, all of which are unable to use the 'localboot' PXELINUX option as they either hang at 'Booting from local disk...' or immediately reboot depending on which SYSLINUX version is used. Many people have suggested using chain.c32 to chain load the local disk as a workaround, but this causes problems with Windows 7 BitLocker as it detects the chain

I have been using memdisk (version 3.82) with no problem. I use it to boot my x86 computer with a compressed image I created/modified from an original DOS floppy bootable diskette. The original size of the image is 2.44 MB. I tried memdisk (version 3.83) and the bootable image gets uncompressed, bu the computer locks up and the las two lines in my screen are: Loading Boot Sector... Booting...

Hallo, I wrote am 26.06.13: > Running "pxelinux": more problems than with 5.10. > 5.00-pre6: all worked fine > 5.10: the start menu (GUI) wasn't shown; "tab" showed the labels, and > the textual menus. Invoking the labels worked. > 6.00: no GUI start menu. "tab" showed the textual menus. Invoking > them seems to do nothing (after some