similar to: iscsi boot window2003

Microsoft has their "boot" version of their iSCSI software initiator. Apparently this still requires that the network card be iSCSI Boot "enabled." Intel seems to be the only obvious company out there supporting it on their Server adapters - I was wondering if there are any thoughts/plans on implementing iSCSI Boot functionality in the HVM Boot ROM? Or maybe there''s

Hi, I've been trying a couple of day now, but I can't seem to figure it out. On www.etherboot.org, I found the example of configuring gPXE so that it mounts an iSCSI lun and then boot from CDROM so you are able to install on the LUN. But if I use gpxelinux.0 (latest release 3.73), with sanboot.c32 like this: label sanboot2008srv menu label ^[iscsi] Windows server 2008 kernel

Hi Bootmeisters, I am using gpxelinux.0 + sanboot.c32 to boot a diskless machine into Linux. I would like to use device-mapper-multipath to provide fault tolerant access to its root disk. Although I am able to do this by hardcoding the additional paths in the initrd, it would be better if the bootloader could pass the information in the iBFT (iSCSI Boot Firmware Table). However, at the

I have a working pxelinux environment. I point the "boot server" (windows dhcp) to my tftp server and "Bootfile name" to pxelinux. How would I invoke the chain loader over iscsi? I was reading the following page and wondering if I could use gpxelinux to boot this? http://etherboot.org/wiki/soc/2009/dverkamp/notes/windows_xp_iscsi I saw examples of san boot here

I have produced a first cut of integrating gPXE with PXELINUX. This builds, in addition to the usual pxelinux.0, an image called gpxelinux.0 which includes the gPXE network stack. The result is that one can now download images via (almost) any network protocol supported by gPXE, including http. This lets one do fun things like using a CGI or PHP script for the configuration file. SAN

Hello ! I am completely new to syslinux. I followed this instruction manually: http://www.wonkity.com/~wblock/docs/html/pxe.html I am on debian and do not have syslinux installed, but using this debian box as a tftp server. I had to modify the instructions given by the installation above. I downloaded the 6.02 version and copied the files to the tftp root. I am using dnsmasq as a tftp

Hi, Anyone has tried to use pxechain with Etherboot? Here is my problem: The Etherboot client had no problem to get the list of install servers manual from the pxechain. But didn't matter which server was chosen, Etherboot client always tried to use the first server to do the installation. Etherboot 5.4 was used. What the problem may be? PXEchain or Etherboot? Thanks, Joyce --

Hello syslinux mailing list, I've been working on a kind of system administration tool ( http://twyna.sourceforge.net/) with a colleague of mine for our Computer Science Bachelor degree internship. I hope I'm saying that right :) We use gPXELinux to boot over a web service and it's all working marvellously, except for the localboot bug. Until now we've used chain.c32 to solve

Dear developer, I am working on a project for my graduate work (diploma), which includes iSCSI and AOE booting. I made some menus using pxelinux and things are working fine with linux, but I have a small problem with windows system which require direct iscsi or aoe access. I have dhcpd.conf setup that it to each first dhcp request handles out pxelinux.0, then I can chooose from that menu which OS

Dear Developer: i am working a project including iSCSI booting. i have a iscsi server with windows xp system image and fedora system image, and a booting server providing dhcp and tftp services.I made some menus using pxelinux and things are working fine with linux, but failed with windows . i use the following strings in my dhcpd.conf: ....... filename = "pxelinux.0";

Unable to boot using qemu-kvm and gPXE from virt-preview repository https://bugzilla.redhat.com/show_bug.cgi?id=512358 Signed-off-by: Alan Pevec <apevec at redhat.com> --- common-blacklist.ks | 9 +++++++++ common-pkgs.ks | 3 +++ 2 files changed, 12 insertions(+), 0 deletions(-) diff --git a/common-blacklist.ks b/common-blacklist.ks index 7c19aa4..2f8842f 100644 ---

Hello, This is my first post. Please forgive me if I am not posting this in the right location. I work at a college where we clone staff computer every now and then. We have an internal network in our office. There is a Linux NAT, DHCP, PXE server in our office separating the two networks. Internally, we PXE with images that boot into Ghost to clone computers. We do not have access to the

Hi All, A while back there was some mention that gpxe may acquire the ability to receive command-line parameters. I'd dearly love if this could become a reality. It would be fantastic if we could have a pxelinux menu config as follows: KERNEL gpxelinux.0 APPEND config http://someserver.net/gpxe-for-this-box.cfg This would solve a huge number of our problems since we don't have the

i want to create a domU using iscsi disk. Since virt-manager and virt-install do not support, pls advise the config file which will be used by xm create to create a xen guest. Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

This may be a better question for the Xen-Devel list, but I''ll start here... Does anyone know if there is any easy way to replace the gPXE ROM with a newer version in Xen? Also, anyone know if there are any plans to have some sort of option in the domU config file to specify a boot rom? Looks like qemu-dm has an "-option-rom" option - is there any way in Xen to make use of

- dracut does not currently support booting a dmsquash file system on an iscsiroot - can not be configured in standalone mode since networking is not up, although works fine if ovirt-config-setup is run once booted. Signed-off-by: Joey Boggs <jboggs at redhat.com> --- recipe/common-pkgs.ks | 1 + scripts/ovirt-config-boot | 67 ++++++++++++++++----

Hi All, I'm running KVM host on CentOS 5.6 x64, all of my guests are CO 5.6 x64 as well. I create / run VMs via libvirt. Here are the packages I have: # rpm -qa | egrep "kvm|virt" kvm-83-224.el5.centos python-virtinst-0.400.3-11.el5 kvm-qemu-img-83-224.el5.centos kmod-kvm-83-224.el5.centos libvirt-python-0.8.2-15.el5 etherboot-zroms-kvm-5.4.4-13.el5.centos libvirt-0.8.2-15.el5

I was trying to load a FreeBSD 10 VM on my CentOS 6.4 machine, and it keeps hanging and not completing the boot. I have FBSD 9.x VM's running just fine, but if I try and load 10.x it's a no go. Attaching to the console using VNC, I see: gPXE (http://etherboot.org) - 00:04.0 C980 PCI2.10 PnP BBS PMM7FC0 at 20 C980 Booting from DVD/CD... CD Loader 1.2 Building the boot loader

I am attempting to setup a test gpxe(linux.0) http site, to test among other things the recent dynamic option 252 solution. In the process of investigation I stumbled across http://www.etherboot.org/wiki/appnotes/authmenus which indicates the gpxe can launch vesamenu.c32 directly. Various other pages on etherboot's site indicate menu.c32/vesamenu.c32 can be used independently as well.

On Sat, Oct 24, 2015 at 6:15 PM, Michael Brown via Syslinux <syslinux at zytor.com> wrote: > Also, not a fork: http://git.ipxe.org/ipxe.git/commitdiff/8406115 A fork is a fork, regardless the reasons behind it (yes, I have some understanding in this case). iPXE is based off of forking further development as of a certain gPXE commit with some backporting of gPXE development to iPXE. --