similar to: 3.1.0 and pxelinux

I have 2 groups of machines, and within each group the pxelinux menu configuration is standard. It would be great to have 2 configuration files rather than one for each machine. I found the pxelinux magic option configfile (209) in http://syslinux.zytor.com/wiki/index.php/PXELINUX and it suggests for ISC dhcpd: site-option-space "pxelinux"; option pxelinux.magic

Hello Peter, The attached patch contains three small (although 2 of them are fundamental :) fixes for pxelinux 1. Alignment error when more than one initramfs are loaded using initrd - the alignment of the last disk is discarded in calculations but is ALWAYS present when the loading procedure is called. As a result - the second image (cpio) is not recognized. 2. On some platforms

Hi I have a package that I'm testing. It seems to install fine and it works, as far as I can tell. For example, I can install the package, and use it, and source the test suite with no errors. My problem is with R CMD check. It passes on R-2.2-0: Robin-Hankins-Computer:~/scratch% R CMD check ./partitions_1.1-0.tar.gz * checking for working latex ... OK [snip] make[1]: Leaving directory

hi all; my first post/question is a bit vague. i'll be more specific on Asterisk@Home usage (eg: how was it?): 1. am able to make it running at home using a braodband connection of dynamic IP with no-ip, i able to SSH to the box and access to the web pages. the problem is with the maint password. how could i change it? in which mechanism that maint reside? is it on the mysql or the linux

Hi, I am new to this list, but would greatly appreciate any help on the topic. We are trying to automate the build/installation of a pSeries machine using kickstart server. We have a process in place that completes a system build of xSeries machines. It uses pxelinux.0 to direct the bootp to the kernel, ramdisk and kickstart.config file. I was trying to use the same process to build the pSeries

> Dear gentlemen, > > here goes the documentation fix I was talking about :-) > > The Wiki page on PXElinux, specifically the chapter on UEFI at the end > of that page: > https://wiki.syslinux.org/wiki/index.php?title=PXELINUX#UEFI > ...contains a few examples of ISC DHCPd configuration. > > The stumbling block for me was the syntax of these "if"

Hello again and thanks for your support. I am trying out the pxe floppy - rbfg that you mentioned in your previous email for some machines that are not pxe capable but have supported network cards. It looks like it is going to work but then hangs. The dialog below is from a vmware session just for testing but I have the exact same problem on an old IBM box with a Intel e100 card. Here is

(this after asking the package author) Hi I cannot install the rmvnorm package under R-2.3.0, or R-2.3.1 beta. It installs fine under R-2.2.1. transcript for installation under R-2.3.0 follows. Robin-Hankins-Computer:~/scratch% R --version R version 2.3.0 (2006-04-24) Copyright (C) 2006 R Development Core Team R is free software and comes with ABSOLUTELY NO WARRANTY. You are welcome to

Hello I'm using the ISC-dhcp 3.0pl1 + pxe patch (from http://savannah.gnu.org/download/pxe-toolkit/) and pxelinux as the loader program. It turns out that in my configuration pxelinux specific DHCP options are sent out by the server encapsulated within vendor extension option (option 43, RFC 1533). Currently pxelinux cannot parse this correctly (the full option 43 with it's contents is

On 8 Nov 2019 at 0:42, Ady Ady via Syslinux wrote: > [in response to my = Frank Rysanek's rantings a few hours earlier:] > > if option architecture-type = 00:09 { > > filename "path/to/EFIx64/syslinux.efi"; > > } ... > > if substring (option vendor-class-identifier, 15, 5) = "00007" { > > filename

Hi I am trying to enable my dhcpd and pxelinux setup to use a specific config file for a booting client. I have read the pxelinux page for this (http://syslinux.zytor.com/pxe.php#special) but still seem to be encountering problems. When running the dhcpd with the '-d' debug option the daemon sees the DHCPDISCOVER from the client and then core dumps. On the client side the DHCPDISCOVER

Dear friends, In accordance with RFC 3942 I would like to submit the following DHCP options for official consideration. These options are used by PXELINUX, which is part of the SYSLINUX distribution, and although exact usage count is impossible to determine, is widely held to be the most widely used method for booting Linux from a network. ---------- Option 208: pxelinux.magic (string)

g'day, i've been using pxelinux for a while on a bunch of machines in a lab. i note your pxelinux site shows configuration for ISC DHCP server - you and others may also find this useful .. most Cisco IOS-based routers (& some IOS-based switches) can run as a DHCP Server. i use them with pxelinux with the following configuration: ip dhcp pool dhcppool-vlan3-host12 host

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 Snom870 Handsets We are in the process of moving to an Asterisk based PBX. At the moment most things work as we wish. However, I have just notices that when I force a reload using 'amportal a reload' I see this loop start in 'asterisk -rvvvvvvvvvv': > Channel Local/s at tc-maint-000002a4;1

Additional information: I was tried it with 2 virtualbox (version 4.2.14r86644).1rst: debian weezy with isc-dhcp-server, pxelinux5.01, pxelinux 6.00, tftp-hpa2nd: empty virtualbox booting from virtual network card. So memtest 4.1 and 4.2 worked with pxelinux 4.06 Peter > Date: Fri, 28 Jun 2013 09:02:30 +0100 > From: matt at console-pimps.org > To: coolpet80 at hotmail.com > CC:

Hi, This series updates to the latest gnulib, after making most of its "make syntax-check" tests pass. There are still a few tests (listed in cfg.mk) that are simply skipped. To enable one, just remove its test name from the list of tests to skip and run "make syntax-check". [PATCH hivex 01/14] maint: add cfg.mk to prepare for syntax-check [PATCH hivex 02/14] maint: remove

Hello ! I'm french, my english is bad :-( I want to boot a computer by network which have a 3Com network card. So I use isc-DHCP, TFTP-hpa and PXELinux. The computer start, make a dhcp request, receive the configuration. The next step is to contact the tftp server to get pxelinux.0 and the configuration. Stop me if I made an error ;) So, in the network I want to use it, there is a dhcp

Good day again Daniel, So the first thing I did was to remove the >NUL for your XMSDSK line and put a PAUSE after it in AUTOEXEC.BAT. That way, I could see the error message: *** XMS RAMdisk v1.9I (FU - 08/98): XMS get free mem error. Then I noticed that if you run AUTOEXEC.BAT manually from the DOS CLI, XMSDSK actually succeeds! So that led to a new test: Duplicate the XMSDSK line. ...

Hello, THE PLAN: a cross-plattform unattended setup system for linux and windows on a RH72 box with PXE, ISC-DHCP2 and TFTP. Lanboot should be offered with linuxinstall and a dos6.22 LANMAN 3.0 bootdisk + djgpp bash for scripting (see http://unattended.sourceforge.net) THE PROBLEM: DOS Utilities force reboot after partitioning. By then the decision if the bootimage or the HD should be booted

This release addresses issues with the Puppet 2.7.0rc3 series. This release is available for download at: <http://goog_1305397870/> http://www.puppetlabs.com/downloads/puppet/puppet-2.7.0rc4.tar.gz See the Verifying Puppet Download section at: http://projects.puppetlabs.com/projects/puppet/wiki/Downloading_Puppet Please report feedback via the Puppet Labs Redmine site, using an affected