similar to: syslinux-3.36 Physical Floppy Disk Access Problem

I have, hopefully, found and fixed the issue with non-kernel binaries that appeared in 3.35. As a result, I have pushed out 3.36-pre6 and am classifying it as a release candidate. Please try it out, especially if you have had problems with 3.35. ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/ -hpa

I have tested with 3.31 (does not broke /dev/null) and 3.35/3.36 that broke /dev/null I verify that /dev/null exist, then compile one of the target available on top Makefile and /dev/null no more exist. Example root:/usr/src/syslinux-3.36# cat /dev/null root:/usr/src/syslinux-3.36# make .depend Makefile:274: .depend: No such file or directory rm -f .depend for csrc in syslxmod.c gethostip.c ; do

Tested floppy boot on two machines (one PII 350, one 486DX4) Floppy boot with syslinux is very very slow, more than 18 mn to boot a linux kernel from floppy on the 2 machines. Tested with 3 different disquettes that were know to work, boot is reached after this very long time. Noise from floppy head make think floppy wait approximatly one minute between each read. No problem with pxe boot with

Hello list, I had to boot a Dell Diagnostic Disk today, and tried doing this via memdisk - which was when I noticed memdisk isn't working for me at all, neither from pxelinux nor syslinux. After trying around with 'raw', 'bigraw' and the like I noticed it doesn't even do anything when just using: LABEL diag KERNEL memdisk .. when I try that: boot: diag nothing

Hi All, Found out Cisco has some newer firmware available for the 7970 series of phones. New sip images are at version level 8.2 (instead of 8.0.2,8.0.3,8.0.4), posted Dec 10, 2006. This major jump in version numbers has fixed a few bugs (time zone not updating properly), but hasn't figured what some would consider to be showstoppers (registration not fully working, and mwi still not

Hello, I noticed after upgrading from 3.20, I haven't been able to get syslinux to boot properly with menu.c32 or mboot.c32 from a USB key. I get an error saying invalid kernel when its trying to load menu.c32 or mboot.c32 (or any other kernel for that matter). I tried 3.35 and 3.36-pre5. Same exact behaviour. I'm using the following to compile: gcc version 3.2.3 20030502 (Red Hat Linux

Hello, I'm Rene living in Germany. I have a problem when I use syslinux versions greater than 3.xx for booting DOS (over dos.bss) and DSL-linux from a hard disk. (I've tried version 3.11 and the newest 3.36). The problem occurred after booting DOS - I can not access to the ordinary 3.5'-floppy drive (e.g. the command "dir a:" fails after a while). DOS not even notices

Hello there I built development version of syslinux from git 6.04-pre3-3-(sometag) and I am trying to boot a slackware-current system with it. I do not use a separated partition for `/boot`. It's just `/dev/sda1` here for `/` and `/boot` is just a folder. I simply use `mbr.bin` against a DOS partition table and the first partition having the bootable flag. With this layout, the only

Hi, Apologies in advance if this is rather long winded ... I have a Windows 2000 DHCP/FTP/TFTP server, serving up a linux-based diags package using PXELinux. Everything is working fine, just like I'd expect. I also have some WinImage images of DOS floppy disks that I'd also like to serve via PXE. So I made up some simple menus using menu.c32 to serve both the floppy image and the

I figure I'm probably trying to do something stupid, but here goes. I'm trying to boot a hard disk image (with one 420MB partition, lilo in the MBR) containing debian etch (kernel 2.6.18) using memdisk (onto a dell 2950 with 8G of ram). Lilo (22.6.1) fails on memdisk 3.35, 3.36, 3.50, 3.51, and 3.52-pre, with L 99 99 99 99 et al, but works on 2.x, 3.00 and 3.31. However, the kernel

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

Hi, there now i am booting pxelinux menu32 with 2 boot images 1. DOS boot image 2. Thinstaion pxelinux and my directory structure is like this (Pxelinux with menu32) /tftpdroot/pxelinux.0 /tftpdroot/pxelinux.cfg/default /tftpdroot/dos.imz (DOS bootimage) /tftpdroot/memdisk (memdisk package) (Thinstation Pxelinux) /tftpdrooot/pxe/pxelinux.0 /tftpdroot/pxe/initrd

Dear All. I have some problem with combined two data frame. .... I have first data frame .. GPAX THAI MATH SCINCE SOCIAL HEALT ART CAREER LANGUAGE 1227 2.99 3.32 2.50 2.64 3.05 3.60 3.72 3.57 2.62 1704 2.81 2.56 2.48 2.86 3.22 3.19 3.55 3.20 2.51 617 2.18 1.90 1.97 2.06 2.38 3.50 3.54 2.33 1.70 876 2.82 3.14 2.73 2.46 2.71 3.11 3.04 3.24 2.90

Hi, I am aware that it is impossible to netboot ISO files through pxelinux/memdisk and that there are multiple reasons for not even attempting it (like the operating system which will try to access a physical optical drive through its own drivers anyway, BIOS issues etc.). When people ask questions regarding ISO support in pxelinux/memdisk, they're mostly told to convert the ISO into a

Hi all, I have pushed out a SYSLINUX 3.32-pre4. This version attempts to work around the "missing floppy drive" issue. If you have systems on which MEMDISK doesn't work without a floppy drive, I would appreciate it if you would test this out. -hpa

Package: logcheck Version: 1.2.34 Severity: wishlist I have a couple of home-made logcheck ignore files, and happened to have one unescaped (and unmatched) `(' in one of the filter lines. Because of this, cron sent a mail with the body "grep: Invalid regular expression" - the subject is the command in the "2 * * * *" line in /etc/cron.d/logcheck, of course. It would be

Dear R Users,i am very new to R. I want your help on an issue regarding distance matrix and cluster analysis i had discharge data of 4 rivers(a,b,c,d) in 4 vectors each having 364 values > dput(qmu)structure(list(a = c(0.26, 0.25, 0.25, 0.25, 0.24, 0.23, 0.22, 0.21, 0.21, 0.21, 0.2, 0.19, 0.19, 0.19, 0.19, 0.18, 0.18, 0.18, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17,

Dear R-list, I have a partly comma separated partly underscore separated string that I am trying to parse into R. Furthermore I have a bunch of them, and they are quite long. I have now spent most of my Sunday trying to figure this out and thought I would try the list to see if someone here would be able to get me started. My data structure looks like this, (in a example.txt file) Subject

I have just pushed out SYSLINUX 3.36-pre4; the main difference is a rewritten MBR which can boot from logical partitions. I plan to eventually submit that to be added into (s)fdisk in util-linux. -hpa

I made a patch that depending of gcc flavor add -no-pie or -nopie on libutil and dos Makefile. This fix fatal error like this sha1hash.c: In function `SHA1Transform': ../include/netinet/in.h:24: error: can't find a register in class `BREG' while reloading `asm' ../include/netinet/in.h:24: error: can't find a register in class `BREG' while reloading `asm'