similar to: syslinux-3.36 and 3.35 compilation broke /dev/null

Tested floppy boot on two machines (one PII 350, one 486DX4) Floppy boot with syslinux is very very slow, more than 18 mn to boot a linux kernel from floppy on the 2 machines. Tested with 3 different disquettes that were know to work, boot is reached after this very long time. Noise from floppy head make think floppy wait approximatly one minute between each read. No problem with pxe boot with

I made a patch that depending of gcc flavor add -no-pie or -nopie on libutil and dos Makefile. This fix fatal error like this sha1hash.c: In function `SHA1Transform': ../include/netinet/in.h:24: error: can't find a register in class `BREG' while reloading `asm' ../include/netinet/in.h:24: error: can't find a register in class `BREG' while reloading `asm'

I have, hopefully, found and fixed the issue with non-kernel binaries that appeared in 3.35. As a result, I have pushed out 3.36-pre6 and am classifying it as a release candidate. Please try it out, especially if you have had problems with 3.35. ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/ -hpa

Hello, I am using the pxelinux.0 and memdisk files from distribution syslinux-3.36. I am no longer able to access the real floppy disk drive B: instead I just get a mirrored copy of the emulated floppy disk A: The default config file is as follows label 1 kernel memdisk append initrd=kd202.img I was previously using the sysliunx-3.20 distribution which gave me access to the real floppy

From: Gene Cumm <gene.cumm at gmail.com> mtools/syslinux.c: Silence warnings from GCC with asprintf's attribute warn_unused_result in certain glibc versions/patches. Assign it to a variable and ignore it as the string is already tested for null before using it. Signed-off-by: Gene Cumm <gene.cumm at gmail.com> --- diff --git a/mtools/syslinux.c b/mtools/syslinux.c index

Hello list, I had to boot a Dell Diagnostic Disk today, and tried doing this via memdisk - which was when I noticed memdisk isn't working for me at all, neither from pxelinux nor syslinux. After trying around with 'raw', 'bigraw' and the like I noticed it doesn't even do anything when just using: LABEL diag KERNEL memdisk .. when I try that: boot: diag nothing

We used syslinux package on IPCop with success to install from floppy, from cdrom, from usb key and pxe. I upgrade the distribution nine month ago from 2.11 to more recent versions (3.11, later 3.20). We add one consistent report of a laptop machine that boot with 2.11 but fail with 3.11 and 3.20 Symptom is that the machine don't display anything after loading the kernel and initrd. with

hi I have download the syslinux-3.51 source package and i have tried to compile syslinux with MinGw. I got the following error message. *********************************************************************** $ make nasm -O99 -f bin -DDATE_STR="'0x47bd5366'" -DHEXDATE="0x47bd5366" \ -DMAP=isolinux.map -l isolinux.lst -o isolinux.bin isolinux.asm

I have put a compile hack in for older distros and pushed it out as syslinux-3.62-pre16; for those who have reported compilation problem on older distros I would greatly appreciate if you could confirm if it works now (it worked for me on a CentOS 3.9 VM.) -hpa

From Ubuntu 14.04, I have installed Samba 4.1.6 and bind 9.9.5 and have them working together as per https://wiki.samba.org/index.php/DNS_Backend_BIND To make it work I had to add the following overrides to /etc/apparmor.d/local/usr.sbin.named: # Samba4 DLZ and Active Directory Zones /usr/lib/x86_64-linux-gnu/samba/** rm, /usr/lib/x86_64-linux-gnu/ldb/modules/ldb/** rm,

Signed-off-by: Gilles Espinasse <g.esp at free.fr> --- scripts/Makefile.host | 2 +- usr/klibc/CAVEATS | 2 +- usr/klibc/README.klibc | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/Makefile.host b/scripts/Makefile.host index d8ab687..6a6b949 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -5,7 +5,7 @@ # # Both C and C++ is

Hello, I noticed after upgrading from 3.20, I haven't been able to get syslinux to boot properly with menu.c32 or mboot.c32 from a USB key. I get an error saying invalid kernel when its trying to load menu.c32 or mboot.c32 (or any other kernel for that matter). I tried 3.35 and 3.36-pre5. Same exact behaviour. I'm using the following to compile: gcc version 3.2.3 20030502 (Red Hat Linux

Nice to see the venerable syslinux updated to version 3.35. I did happen to encounter an issue with the latest release though. I performed 'syslinux -f' on a 32MB USB drive and all seemed well...until I tried to boot from it. Error message and drive details below: - - - /error message: SYSLINUX 3.35 2007-01-28 EBIOS Loading Invalid or corrupt kernel image. boot: /bootable USB drive

Hello, While attempting to build syslinux-3.52-pre6 for testing (my SCSI machine won't boot from CD-ROM with 3.51) I hit this problem: nasm -O99 -f bin -DDATE_STR="'3.52-pre6'" -DHEXDATE="0x46c22b21" \ -DMAP=pxelinux.map -l pxelinux.lsr -o pxelinux.bin pxelinux.asm pxelinux.asm:1206: error: short jump is out of range nasm -version NASM version

Is it possible to configure syslinux.cfg on a floppy to start Win98 on a secondary hard drive? If so, how is this done? Currently I have Linux and Win98 on the primary hard drive, and when I attempt to use the floppy to start Win98 on the second hard drive, I simply start Win98 on the first drive. I have tried many different approaches, all to no avail, and I would really appreciate some

I figure I'm probably trying to do something stupid, but here goes. I'm trying to boot a hard disk image (with one 420MB partition, lilo in the MBR) containing debian etch (kernel 2.6.18) using memdisk (onto a dell 2950 with 8G of ram). Lilo (22.6.1) fails on memdisk 3.35, 3.36, 3.50, 3.51, and 3.52-pre, with L 99 99 99 99 et al, but works on 2.x, 3.00 and 3.31. However, the kernel

Dear R Users,i am very new to R. I want your help on an issue regarding distance matrix and cluster analysis i had discharge data of 4 rivers(a,b,c,d) in 4 vectors each having 364 values > dput(qmu)structure(list(a = c(0.26, 0.25, 0.25, 0.25, 0.24, 0.23, 0.22, 0.21, 0.21, 0.21, 0.2, 0.19, 0.19, 0.19, 0.19, 0.18, 0.18, 0.18, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17,

Signed-off-by: Gilles Espinasse <g.esp at free.fr> --- gpxe/src/Makefile.housekeeping | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-) diff --git a/gpxe/src/Makefile.housekeeping b/gpxe/src/Makefile.housekeeping index 1f5e115..d49416e 100644 --- a/gpxe/src/Makefile.housekeeping +++ b/gpxe/src/Makefile.housekeeping @@ -134,6 +134,16 @@ SP_FLAGS := $(shell $(SP_TEST)

gcc hardened by default is seen on gentoo, alt-linux, HLFS, etc. Patch fix on syslinux this error during gpxe compilation: [BUILD] bin/cpu.o arch/i386/core/cpu.c: In function 'get_cpuinfo': arch/i386/include/bits/cpu.h:79: error: can't find a register in class 'BREG' while reloading 'asm' arch/i386/include/bits/cpu.h:79: error: can't find a register in class

Hello. I found bug probably comes from BIOS fault. It does not boot from CDROM if the PC has only CDROM drive but no HDD. I mean, it can boot from CDROM if the PC has HDD but not boot if no HDD. I think BIOS returns wrong info. But I appriciate if there comes workaround. BTW, I got another problem -- I can not compile syslinux 3.07. What version of nasm you use? --- Okajima, Jun.