similar to: Memory upgrade breaks net boot (PXE + NFS Root)

Dear all, unfortunately I observe drastic drops in read- performance when I connect LUNs >2.2T to our Centos 5.5 Servers. I suspect issues with the GUID Partition Table, since it happens reproducibly only on the LUNs >2.2T and goes back to normal performance when using a LUN <2T with "normal", Legacy MBR partitions. All machines are CentOS 5.5 (and RHEL 5.5) on IBM Blades

Dear list, we have a relatively new Sun Storage 7310, where we connect CentOS 5.5 Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades boot from SAN via qla2xxx, and have no harddisks at all. We want them to use multipathing from the very beginning, so /boot and / are already seen by multipathd. Problem is, that the Sun 7310 has two storage heads which run in

Hi I'm missing something here but I cannot figure out what. What I can see is that the same code works when I load it via source(...) yet fails when I execute it after loading the package I have built (which includes the code. Below is a transcript of my R session. First I load the code from a file, using source(). Then I execute it fine. Then I remove the function object, I load the

Hello, I'm trying to set up an alternate user with a different inbox using passwd-file and userdb extra fields and the extra field settings don't seem to be taking effect. I've used auth_debug and mail_debug and I'm unclear how I can further troubleshoot this. Is it possible to have inbox=yes in one namespace globally and then override this for one user by setting inbox=no for

Dear all, I am trying to use 'bam' to run the following generalized additive model: ### m <- bam(result ~ factor(city) + factor(year) + lnpopulation + s(lnincome_pc) + ,data=full_df,na.action=na.omit,family=ziP(theta = NULL, link = "identity",b=0)) But getting the following error: ### Error in bam(result : extended families not supported by bam The documentation for

Do you have the mgcv package installed (I think it's part of the standard distro, though) /loaded? ziP is there, not in BAM. Other than that, sorry, no clue. Cheers, Bert Bert Gunter "The trouble with having an open mind is that people keep coming along and sticking things into it." -- Opus (aka Berkeley Breathed in his "Bloom County" comic strip ) On Mon, Nov 6,

Hi, Is the stars command in the base package or do I need to download? I am looking to make star/radar/spider charts. Thanks! Britt Britt Aronovich Marketing Analyst BAM (Brooklyn Academy of Music) ... Peter Jay Sharp Building 30 Lafayette Ave. Brooklyn, NY 11217-01486 ... P: 718.724.8038 E: baronovich@BAM.org<mailto:baronovich@BAM.org> BAM.org Facebook.com/BAMstage

Hi all: I've got a data of ".bam" which is created from my partner under linux sysyem. My system is window xp, and I wanna know how to read the .bam file. Many thanks! My best [[alternative HTML version deleted]]

Hello, I'm trying to use the bam() function in the R mgcv package for a large set of grouped binary data. However, I have found that this function does not take data in the format of cbind(numerator, denominator) on the left hand side of the formula. As an example, consider the following dat1 <- data.frame(id=rep(1:6, each=3), num=rbinom(18, size=10, prob=0.8), den=rbinom(18, size=5,

Hi, The problem is most likely, you need to call a R CMD BATCH with your arguments and the R-script inside of a shell script that you submit to your qsub. Unfortunately we don't use qsub anymore so can't test it, but it should be as follows: R-script eg. test.R: > ##First read in the arguments listed at the command line > args=(commandArgs(TRUE)) > > ##args is now a list of

I just upgraded my home KVM server to CentOS 6.0 CR to make use of the latest libvirt and now my RAID array with my VM storage is missing. It seems that the upgrade to mdadm-3.2.2 is the culprit. This is the output from mdadm when scanning that array, # mdadm --detail --scan ARRAY /dev/md0 metadata=imsm UUID=734f79cf:22200a5a:73be2b52:3388006b ARRAY /dev/md126 metadata=imsm

Dear all, please could you advise me on the following : I've written a R script that reads 3 arguments from the command line, i.e. : " args <- commandArgs(TRUE) TUMOR <- args[1] GERMLINE <- args[2] CHR <- args[3] ". when I submit the R script to a PBS HPC scheduler, I do the following (below), but ... I am getting an error message. (I am not posting the error message,

Dear useRs, I reran an analysis with bam (mgcv, version 1.7-17) originally conducted using an older version of bam (mgcv, version 1.7-11) and this resulted in the same estimates, but much lower standard errors (in some cases 20 times as low) and lower p-values. This obviously results in a larger set of significant predictors. Is this result expected given the improvements in the new version? Or

This sounds like an operating system specific question, in that "submit the R script to a PBS HPC scheduler" would be the kind of action that would run R with very different environment variables and possibly different access credentials than your usual interactive terminal. A thorough reading of the "Installation and Administration Guide" and some study of your HPC

I'm on a mac, and I'm trying to get a series of complicated things to work. Yay! I've got an iRobot Create with BAM (Bluetooth Adapter Module), and I'm trying to get RealTerm, which is a serial Terminal, to not only send serial commands from the wine emulation to my real system, but to get those serial commands to be sent over bluetooth to a specific device, and have the input

Fresh install of CentOS 4.4. uname -a, lspci, & lsusb output at bottom. I insert my 256MB USB key, light goes on, then off. Never mounts. Here's the end of dmesg: usb 1-1: new full speed USB device using address 11 scsi7 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: STORAGE DEVICE Rev: 1.02 Type: Direct-Access ANSI SCSI revision:

I am having an extremely strange issue with a BL460c1 (G1) blade on a c7000 enclosure. I could not for the life of me get the machine to ping the gateway or any other blade on the same enclosure (yes, the subnet mask was correct & quadruple-checked); although pinging to the local IP works. I was almost convinced that it was a network or hardware issue; until I asked someone to try

Hello R users, I have a quick question I was hoping to get your input on. I am new to R and the smooth statistical regression world, and am trying to wrap my mind around the issues concerning using splines for mixed effect modeling. My question is the following: in the ?gamm? function, generalized additive mixed models can be estimated by including random components. These can be explicitly

Just cross pairs 1-2 and 4-5 1 <--> 4 2 <--> 5 Never done an E1, but I think it's the same for a T1 4 wire cable. Tim Thompson Commercial Sales Engineer http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: bam [mailto:bam@cqm.co.uk] Sent: Monday, December 29, 2003 9:12 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E100P pinouts

If call recordings were stored in stereo and the callers were evenly distributed along the stereo spectrum. BAM. Just a cool idea I thought up, but probably completely impossible, and even if not, likely too much work for too little reward. Even less likely would be live stereo conference calling. But hey, RTP certainly supports stereo streams, right? I don't know if any of the used codecs