Displaying 20 results from an estimated 2000 matches similar to: "syslinux-2.11 boot, syslinux-3.20 fail"
2007 Feb 09
6
syslinux-3.36-pre8 feedback
Tested floppy boot on two machines (one PII 350, one 486DX4)
Floppy boot with syslinux is very very slow, more than 18 mn to boot a linux
kernel from floppy on the 2 machines.
Tested with 3 different disquettes that were know to work, boot is reached
after this very long time.
Noise from floppy head make think floppy wait approximatly one minute
between each read.
No problem with pxe boot with
2011 Jan 30
1
[PATCH] Very minor various typo fixes
Signed-off-by: Gilles Espinasse <g.esp at free.fr>
---
scripts/Makefile.host | 2 +-
usr/klibc/CAVEATS | 2 +-
usr/klibc/README.klibc | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index d8ab687..6a6b949 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -5,7 +5,7 @@
#
# Both C and C++ is
2011 Mar 29
1
[PATCH] Fix gpxe compilation when gcc is patched to compile by default with -fPIE -Wl, -pie
Signed-off-by: Gilles Espinasse <g.esp at free.fr>
---
gpxe/src/Makefile.housekeeping | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/gpxe/src/Makefile.housekeeping b/gpxe/src/Makefile.housekeeping
index 1f5e115..d49416e 100644
--- a/gpxe/src/Makefile.housekeeping
+++ b/gpxe/src/Makefile.housekeeping
@@ -134,6 +134,16 @@ SP_FLAGS := $(shell $(SP_TEST)
2011 Dec 09
1
[PATCH] Fix compilation when gcc is patched to default to -fPIE -Wl, -pie
gcc hardened by default is seen on gentoo, alt-linux, HLFS, etc.
Patch fix on syslinux this error during gpxe compilation:
[BUILD] bin/cpu.o
arch/i386/core/cpu.c: In function 'get_cpuinfo':
arch/i386/include/bits/cpu.h:79: error: can't find a register in class 'BREG' while reloading 'asm'
arch/i386/include/bits/cpu.h:79: error: can't find a register in class
2010 Jul 20
2
a list of which kernel versions work with klibc
Is there a list of which kernel versions (are supposed to) work with
(each version of) klibc?
I do recall reading something that said klibc should run under any
version of the kernel, regardless of which version it is compiled
against. Following the new instructions on this list earlier (to use
the KLIBCKERNELSRC= parameter to point to the installed kernel
headers) as well as also making the
2004 Jul 16
1
Problem with SysLinux but not with LILO
Hi,
I am trying to use two products that use SysLinux and finally realised the
SysLinux is the cause of my woes. I'm trying to use Freesco and IPCop. IPCop
version 1.3 used a different boot loader to 1.4 which uses SysLinux. I have
been through numerous trials and tribulations in trying to get Freesco to
work but eventually gave up and went with IPCop. I kept getting the "Boot
2008 Jul 24
3
IPCop updates, Evolution Calendar rarely crashes now
I know a lot of you are using IPCop where you work. They have three
(3) updates posted, during the past two (2) days. The last one, I'm
getting an error, when I try to Download it, and I will report that to
the IPCop list or bugzilla after I send this message.
"No such file or directory
http://prdownloads.sourceforge.net/ipcop/ipcop-1.4.21-update.i386.tgz.gpg?download"
The problem I
2008 Feb 09
1
How to deal with pciback?
Hello everybody,
for just one week I try to install three servers on an OpenSuSE 10.3
dom0 equipped with 4 NICs. One server is an OX using the onboard NIC via
xenbr0. This server runs!! For my IPCop server I intended to use the
three remaining NICs (Intel Pro100/S, 3Com 3C590, Realtek RTL-8139).
These three NICs should be used natively by my IPCop. So I tried to use
the pciback driver. I wrote a
2007 Feb 12
2
syslinux-3.36 and 3.35 compilation broke /dev/null
I have tested with 3.31 (does not broke /dev/null) and 3.35/3.36 that broke
/dev/null
I verify that /dev/null exist, then compile one of the target available on
top Makefile and /dev/null no more exist.
Example
root:/usr/src/syslinux-3.36# cat /dev/null
root:/usr/src/syslinux-3.36# make .depend
Makefile:274: .depend: No such file or directory
rm -f .depend
for csrc in syslxmod.c gethostip.c ; do
2006 Aug 16
3
proxy server - ipcop vs CentOS
I have purchased a used Compaq DL360 which I was going to use as a proxy
server. Presently, we are using a cheap box with ipcop which is working
fine but it didn't have much RAM (64MB), etc.
This new box we will want to run squid and perhaps dansguardian for
filtering (this is a non-profit company) and I'm wondering if I should
just put ipcop on it or would it be smarter/better to install
2009 Jan 17
2
vmware problem took down X on host?
I run VMWare server 1.07 on Centos 5. Last night I left a Windows 2000
virtual machine doing a ClamWin scan of drive M: when I went to bed around
midnight. Drive M: is actually a volume on the Centos 5 host, mounted via
Samba. It has about 40Gb of photos on it, plus a few other things. I had
the VM up visible in the VMWare Server Console running under KDE on display
8 (X session #1), my
2006 Aug 07
1
"sector read error" with 3.20-pre8 syslinux.com
Hi All,
A colleague of mine is using syslinux-3.20-pre8, syslinux.com, under
DOS to install syslinux loader. It gives "sector read error". He
re-compiled syslinux.com under a linux box, and used it successfully
to install the loader from DOS. He is installing it on a hard drive (C:)
He booted from a floppy and ran: "syslinux.com C:" at A:\ prompt
He tried with
2005 Jan 18
0
Archives and question
Hello--
I am brand new to this list. I''ve been using a pre-packaged subset of
Linux that comes with an application called IPCop. (If you''re unfamiliar
with IPCop, I think it''s a wonderful, easy-to-use firewall application
that will run on pretty low-end hardware.) But otherwise I''m pretty much
a neophyte with Linux.
Two questions:
1. Is there an archive for
2015 Jun 29
0
Using a CentOS 6 Machine as a gateway/router/home server
On Mon, 2015-06-29 at 08:17 -0700, david wrote:
> <snip>
> >
> >Yup. For, um, about a dozen years, I ran RH 7.1,7.2, 7.3, and eventually 9
> >on an old box that was nothing but a firewall router. I was seriously
> >paranoid - no gcc or any development tools, no X, not much of anything. To
> >the best of my knowledge, we never had a breakin.
> >
>
2008 May 04
1
win98 on a second hard drive
Is it possible to configure syslinux.cfg on a floppy to start Win98 on a secondary hard drive? If so, how is this done?
Currently I have Linux and Win98 on the primary hard drive, and when I attempt to use the floppy to start Win98 on the second hard drive, I simply start Win98 on the first drive. I have tried many different approaches, all to no avail, and I would really appreciate some
2010 Dec 02
1
Syslinux Digest, Vol 93, Issue 1
All,
Thanks for all your help. Now, I can compile the latest source code base on
RedHat 5.5 after update nasm(to 2.09) and binutil(2.17).
And *make spotless* before *make* under core/ directory. But with the new
pxelinux.0, the PXEClient can not bootup.
The error info,
No valid file system found!
And stuck in there. I think maybe the gcc cause the problem. My gcc version
is 4.1.2.
Thanks aaron
2006 Dec 30
0
RE: CentOS Digest, Vol 23, Issue 30
-----Original Message-----
From: "centos-request at centos.org" <centos-request at centos.org>
To: "centos at centos.org" <centos at centos.org>
Sent: 12/30/06 12:01 PM
Subject: CentOS Digest, Vol 23, Issue 30
Send CentOS mailing list submissions to
centos at centos.org
To subscribe or unsubscribe via the World Wide Web, visit
2006 Aug 26
2
SYSLINUX 3.20 released
Hi all,
I have officially released SYSLINUX 3.20:
Changes in 3.20:
* EXTLINUX: New options --install (-i) and --update (-U), to
make it clear if a boot loader should be installed or
updated. For now, defaults to --install for compatibility;
a future version will require one of these options.
* New library functions to load and place files in
2004 Jan 12
1
tinc and ipcop
On Mon, Jan 12, 2004 at 02:11:38PM +0100, Ralf Petry wrote:
> more or less just a general question: i am running a suse linux 8.1 as
> a server and ipcop 1.2 (and at another place ipcop 1.4) as
> firewall/router.
> i would like to achieve the following: allow a certain company (with
> windows server and clients) to connect
> to my network via vpn. where would i set up tinc? on
2006 Mar 17
3
SYSLINUX 3.20-pre7 pushed out, with mboot fixes
Hi all,
I have merged Tim's patches to the mboot loader, and have pushed it out
as 3.20-pre7.
I guess I'm going to actually have to make a 3.20 here soon...
-hpa