similar to: Universal Packet Driver

hi: i try to make some images for pxelinux+memdisk. the version i try is 2.0.6 and 2.0.7pre5 for 2.88M floppy image, first i make a 1.44M boot floopy, then use "winimage" to load the disk and transfer it to 2.88M format, then save the image. it seems a easy way to make a 2.88M boot image. for harddisk image, i use vmware to build a virtual machine with 20M harddisk, make it boot

I am using memdisk to remotely flash the BIOS and other firmware. It works well for most flash programs. After the flash I need to initialize the NIC to send a signal to my management server that the flash is complete. I am curious as to how others have solved this problem. Thanks.

Hi, I'm trying to get the above working, without success so far: UNDIS.DOS refuses to load with an invalid NDIS stack message (from memory). keeppxe has some effect: it reduces the available conventional memory by 140 kbytes or so... still, the packet driver doesn't seem to find the interface. Does anybody have a working setup I could look at? -- Thanks, Feri.

Hi guys, I'm trying boot a floppy basead netbootdisk solution ( http://www.netbootdisk.com/) using grub and memdisk. This is a Floppy 1.44 Mb with TCP/IP and Ethernet Drivers for DOS. This image doesn't has a command.com. This file is unzipped on boot. Using a floppy, the machine boots, but when I trying to use a image from floppy which memdisk, the boots hangs. The image can found at

Hi, I am not sure it this still is a point, but I just discovered that a chrooted rsync version 2.6.3pre1 is forgetting the time zone underways: Jan 12 07:00:01 ftp4 rsyncd[11091]: rsync on dobes/ from dobes@edoc1.gwdg.de (134.76.28.251) Jan 12 06:00:39 ftp4 rsyncd[11091]: wrote 732542 bytes read 182 bytes total size 553909487945 Logging is done with syslog. Time zone is GMT+1, the system

Hi I am using PXELinux to boot BartPE and some other application and it works fine. There are some other Boot application which I am using 3COM MBAUTIL PXE.mnu and floppy images. I have problem chaining from pxelinux.0 to 3com pxe.0 (pxe.mnu). Consider: BIOS->(DHCP-TFTP)->pxelinux.0 works fine. BIOS->(DHCP-TFTP)->3COM pxe.mnu works fine, the menu appears and I can choose a floppy

Hi, I'd like to build a toolkit CD specifically for conducting forensics on FreeBSD. I'm not talking about a bootable CD but rather one that I could pop into a CD ROM drive and run trusted commands like ps, netstat, ls, etc., from. I'd like to build a CD that would work on -RELEASE versions of FreeBSD like 5.1 and -STABLE versions of FreeBSD too. Can anyone give me any pointers

Hi, I'd like to build a toolkit CD specifically for conducting forensics on FreeBSD. I'm not talking about a bootable CD but rather one that I could pop into a CD ROM drive and run trusted commands like ps, netstat, ls, etc., from. I'd like to build a CD that would work on -RELEASE versions of FreeBSD like 5.1 and -STABLE versions of FreeBSD too. Can anyone give me any pointers

--- Miles Egan <miles@caddr.com> wrote: > Are there rpms for flac available? I'm not aware of any official maintainers but supposedly the gstreamer guys (http://gstreamer.sf.net) have a spec file for it. I am going to look into it in the next couple of days but when 1.0 comes out I'm sure RPMs will pop up pretty quickly. Josh __________________________________________________

Is it possible to chain isolinux and memdisk over pxelinux? If it's possible, I'd like to boot a CD Image over the network. I've been using pxelinux to boot ltsp for years, and recently upgraded to take advantage of memdisk for booting a DOS hd-image. Ideally I'd be able to boot a CD-Image. Thoughts? -- <:3)~ Michael T. Garrison Stuber

Can anyone please tell me how to create a bootable 10MB hard disk image for use with memdisk? I'd like to use FreeDOS. And I know little of DOS. Thanks.

Hi Trying to get rcov going (has been working), but with the following context and specs it fails. context ''/account POST with invalid attendee'' do controller_name :account setup do Attendee.stub!(:create!).and_raise(ActiveRecord::RecordInvalid.new( Attendee.new)) end specify ''should raise on create'' do Attendee.should_receive(:create!).with({

On Thu, Feb 17, 2005 at 16:09:50 -0800, Mikey Sklar wrote > > I use 8MB DOS images with pxelinux to load firmware. Which platform > would you like them for (I have many). I just saw your post and I would definitely be interested in an 8 MB DOS images to work with pxelinux. I have tried the method described in http://people.cs.uchicago.edu/~gmurali/gui/downloads.html but I keep getting

Hi, I''m a bit of a beginner at this and I''m having some problems with installation, hopefully someone can help. I''m following the guide for setting up under Mac OS X at http://hivelogic.com/articles/2005/12/01/ruby_rails_lighttpd_mysql_tiger . I follow the tutorial all the way through without any errors but when it comes to the MySQL Native Bindings step I get an

I think my rails app has a slow memory leak that degrades performance over the course of several days. I''d like to get to the bottom of it but in the meantime I''d prefer to just bandage it and force the fcgi library to start a new instance of my app every so often. Is there a clean way to do this? Calling break in the each_cgi loop causes an error. Sending SIGUSR1, which

Hi, I have a table with data, as below: dput(table): structure(list(Adrian.Cole = c(0L, 0L, 0L, 0L, 0L, 0L), Alison.Wong = c(0L, 0L, 0L, 0L, 0L, 0L), Andrei.Savu = c(0L, 0L, 0L, 0L, 0L, 0L), Bruno.Dumon = c(0L, 0L, 0L, 0L, 0L, 0L), Edward.J..Yoon = c(0L, 0L, 0L, 0L, 0L, 0L), Eugene.Koontz = c(0L, 0L, 0L, 0L, 0L, 0L), Jakob.Homan = c(0L, 0L, 0L, 0L, 0L, 0L), Kelvin.Kakugawa = c(0L, 0L,

Hi, I found it a while ago, an add-on to Rails for supporting movable select boxes, but I searched through the wiki and the mailing list and couldnt find what I was looking for. I was hoping someone might know of or remember something about the project. Thanks, Dylan.

Can someone point me to instructions on booting BartPE with pxelinux.0 over the network. Thanks.

How does one make a HD image? Floppy images are easy enough, but to have to create a hdimage, you need MBR and partitions, etc... I want to create a 10MB DOS HD and boot it, how would I do this with Linux? Thanks.

memdisk fails to boot HD image, if the system does not have an HD. Has any seen this? Is there a solution? memdisk output: Disk is hard disk, 9216 K, C/H/S = 9/64/32 Total size needed = 2063 bytes, allocating 3K Old dos memory at 0x9dc00 (map says 0x9dc00), loading at 0x9d000 INT 13 08: Failure, assuming this is the only driveold: int13 = f000799a int15 = f000f859 new: int13 = 9d000008 int15