similar to: USB Booting Problems

Hi I am trying to do some simple experiment with Asterisk . my intention is to communicated two PC in my lan to voice -communicate with each other with out extra hardware I searched the FAQ and wiki for any links for this , so far I have not found one , It would be much help , if I get a link on ? communicating PC to PC in the same lan through Asterisk ?

Hello List, iam following to this howto: http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick but when iam try the command: # syslinux /dev/sda1 it writes only into the FAT partition the files they need, but mbr still is empty after. iam do this: # dd if=/dev/sda of=/tmp/mbr.dd bs=512 count=1 and open it with ghex2 in my case and see only the partition table.

Hello I'm running centos 3 and a raid 5 array running in good order however I'm trying to install some monitoring for the raid array using dptapps-static-3.1.24-1.i386.rpm and run it but this fails: [root at ns1 Scripts]# /usr/dpt/raidutil -L physical osdIOrequest : File /dev/dpti17 Could Not Be Opened Engine connect failed: COMPATIBILITY number Has anyone a rpm for a supermicro

Hi, i have seen a post with the same title, but didn''t help a lot -it mentioned, that the image was for LVM, which i don''t think is my case. I downloaded the debian31 image from http://jailtime.org. Initially, i had some problems and changed the configuration file a little. Here it is now: ----------- kernel = "/boot/vmlinuz-2.6-xenU" memory = 256 name =

Hi all The printing via Samba+Cups has stopped working. I'm using Mandrake 10.0 Official as a Samba server for file sharing and printing on a Windows network. Printing from a WindowsXP client to the Samba server now fails and I don't know why it has suddenly stopped, it used to work. File sharing still works okay. There are on no errors logged on the Linux Samba box, the Windows

I couldn't find this information in the mailing list archive, so I thought I mention if it someone else runs into the same problem. While some mails in the archive point out that it is not possible to just take a CD iso image and boot it over PXE, it *is* possible to boot over PXE and the download the rest of the image into RAM over ethernet. SystemRescueCD

Hi, OK. I build syslinux-6.02-pre6 from https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from experimental): root at jessie: ~# cd /tmp root at jessie:/tmp# wget https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz root at jessie:/tmp# tar xfz

> Hi, > > OK. I build syslinux-6.02-pre6 from > https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz > on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from > experimental): > > root at jessie: ~# cd /tmp > root at jessie:/tmp# wget >

Hello all, I have a boot server (running Debian Lenny x64) with a number of bootable options already configured (freedos, memtest, sysresccd etc). What I am struggling to do now is add Ubuntu and Debian netinst images so that I can boot from the network and have all the boot options available as if I was using a CD-ROM. The problem is that (as far as I can tell) the Ubuntu and Debian

Hi all, I followed the instructions here: http://library.linode.com/email/postfix/dovecot-mysql-centos-5 to configure Postfix to work with MySQL and Dovecot before discovering PostfixAdmin (I was searching for a visual tool for creating users). Since I had created MySQL database already for virtual domains and user mailboxes (following the instructions I linked to earlier) and PostFix

I've run into a rather odd problem. It seems that I can format and make bootable CF/SD cards and USB Flashdrives under Windows 98SE and MS-DOS 6.22 that will boot to a A: prompt on my system. But when I try making the same CF/SD cards and USB Flashdrives bootable under linux using syslinux I get nothing, not even a error message. It's like the syslinux bootloader doesn't even

Hi list, my media center PC is freshly installed with Debian 10.2 "Buster". It doesn't support Geforce 6800 GT (NV40) boards through the nvidia nor the nvidia-legacy drivers any longer. The legacy drivers worked up until Debian 9 "Stretch", but no longer. I know that the hardware works because I can boot SystemRescueCD from CD and get a flawless desktop presentation on

Hello, I cannot boot with GRUB and SYSLINUX from a logical partition on my USB drive. Here is the test setup: - 4GB Flash drive with the following partitions: sdb1 Primary fat32 ~ 800MB sdb2 Primary fat32 ~ 800MB sbd3 Primary fat32 ~ 800MB sdb4 Extended partition sdb5 Logical partition ~ 800MB sdb6 Logical partition ~ 600MB - Grub files were copied to /dev/sdb1/boot/grub (Stage

David Christensen wrote: > This is how I prepared an ADATA USB Flash Drive 4 GB: ... install-mbr /dev/sdb ... [Rest of very clear description snipped.] What's that? That desn't exist in the Debian I'm running. Otherwise you gave a very good description of what you're doing. >From another message: > Please provide a URL for documentation that explains how to build a >

Hi It looks to me there's some issues in the Linux implementation of syslinux (root ver, I don't have mtools). When I used "syslinux -sf /dev/sda1", the stick was not bootable, it showed a black screen when booted, with a ";" appearing when I pressed a button. The partition was marked active & bootable. And it was the only partition, and primary. Then I did the

On 03/19/2017 11:28 PM, David Christensen via Syslinux wrote: > I will try to do an install later, and will report the result. Booting the USB flash drive I prepared, the Debian installer runs: Select a language English Select your location United States Configure the keyboard American English Detect and mount CD-ROM Incorrect CD-ROM detected The CD-ROM drive contains a CD which

Hi, Jernej Simon?i? wrote: > As long as you have cygwin with development tools installed, it's just > ./configure && make. autotools magic. I myself have few clue of contemporary MS-Windows. > https://eternallybored.org/misc/xorriso/xorriso-1.4.2-cygwin32.zip Thank you for flying xorriso. > > > oscdimg.exe -a -m -o -j1 > > >

Hi, The examples for making a bootable usb key using extlinux just transfer a live cd to usb. To me, this misses the advantage of usb keys (other than size), that they are writable. I would like to have a full linux install on a usb key and be able to boot it using extlinux. This way I can install new packages and make other changes without jumping through squashfs hoops. Is there reason why

On Mon, Apr 18, 2016 at 5:40 AM, Atle Holm via Syslinux <syslinux at zytor.com> wrote: > I am looking for guides on how to create syslinux uefi bootable usb. > A syslinux bootable usb is created already with vesamenu and luascripting. > Want to set up the same thing to be UEFI compatible. What are you doing with Lua? Offering multiple boot selections including ESXI's

Hi, I bought a USB hard drive, got Mandriva installed on it, and made it bootable with extlinux. Works great on machines that can boot from USB. I also created a boot cd using the instructions in the wiki. This is working too. The only problem with the boot cd is that I had to copy the kernel, initrd, etc. to the cd. This means that whenever I install a new kernel I'll have to create and