similar to: Booting BartPE 3110a

Hi, I've read in some post in your mailing list there is a special version of startrom.0 which is possibile to load remote bart oe by xpe. Can you provide me it or teach me how to create my own one? Thanks in advance

So I've been playing with this for hours and still unable to get everything working properly. In short I'm trying to boot an ISO image created by BartPE over pxelinux. When I attempt to do this it goes directly to a blank screen that just has a blinking cursor. Here's what my setup looks like: pebuilder.iso - the ISO file created from BartPE using WinXP SP2 CD as source but with

Hello I'm working on my RIS server; I got a problem when I use pxelinux.0 to load setupldr.exe from windows XP 32bits (both home and corporate) Here is how I configure a working server, then how to modify it to reproduce the bug: ========================= I suppose you got -a dhcp server configured to load pxelinux.0 to client computer. -a working tftp server (mine is tftpd-hpa, with a rule

Hey list, I have an older 2005 Uniwill 259ia3 with a Phoenix bios. Flash booting is limited to keys 512 MB or less! Here's my setup recipe: used the HP utility v. 2.0.6 giving me this geometry ---------------- fdisk -l ----------- Disk /dev/sdb: 493 MB, 493879296 bytes 255 heads, 63 sectors/track, 60 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start

I am trying to download a 200MB ISO file and each time I attempt to do so it will timeout after around 30 MB. I've used both a Microsoft and a FreeBSD tftp client with the same results. When PXE booting a pc and letting it download the ISO it either hangs halfway through or the ISO appears to be corrupted when trying to boot to it from ramdisk. I am looking for suggestions on how to

Greetings Luis, I saw a thread about Startrom.com and startrom.o that had your name attached... I was wondering if you had a moment to comment on an issue that I have. I have a Linux server that is our corporate PXE server. It is set up in a logical folder structure so that a host can be pointed to boot a variety of different OS's (DOS, Linux loaders, Windows PE). Here is in my dilemma,

We use pxelinux and tfp-ha for windows installation together with winpe 2005 under linux. It works and we are happy. But we have one problem because we want to add one more image for xp pro x64 too. Since there is already a ntdetect.com, NTLDR and winnt.sif in the /tftpboot root directory we can't add the 64 bit ones. It's no problem to use different startrom.0 files since I can specify

Hello syslinux, Here is a good article http://oss.netfarm.it/guides/pxe.php I did it all, but when my windows XP is starting UP it asking txtsetup.sif and cannot find it If you did it. write me please... -- Best regards, Anton mailto:asa at roma.zp.ua

I researched on Archive, but the instruction says to copy startrom.com to startrom.0, so I changed boot program to startrom.0 instead of pxelinux.0, it gives me a TFTP error saying file not found. then I keep startrom.0, change boot program back to pxelinux.0, then I do not see F12 key and boot directly to PXE. then I change the boot program to startrom.com it asked me to press F12, but can

Has anyone been able to boot a bartpe image successfully using pxelinux or does anyone know if this is impossible? For those who don't know, bartpe is a legitimate way to make a trimmed down installation of Windows XP or Server 2003 using your installation media. For more information on bartpe see: http://www.nu2.nu/pebuilder Basically the pebuilder gathers the minimum files needed to

Have a look at the 911cd forums. I wrote the initial thread on RAM booting WinPE. To answer to question... memdisk won't work with Windows. Windows uses 32bit access (direct HW access) and memdisk relies on the BIOS. Any programs that don't use the BIOS disk interfaces will not work. The other problem is the allocation of memory. Windows doesn't respect the memdisk allocation.

Turns out that I did not have a corrupted ISO file and tftp-hpa is not at fault. I had saved the winnt.sif file in a unix format and for reasons that are not clear this was producing the error message telling me txtsetup.sif is missing or corrupt. One would think the parsing of the file would cause the inability to locate the ISO file to be downloaded since that information is the last line in the

i just discovered the alternate ftp server syntax for pxelinux in the changelog today. this interests me as I would like to use pxelinux on a linux box to give a config file which tells pxelinux to fetch the windows 2003 bootloader program (actually startrom.n12 from windows 2003) from the windows box. IE: label windows kernel 192.168.1.2::startrom.0 since i can watch the fetching of

I apologize if this is the wrong place to be asking this, but I'm pretty much out of options on where to go. I'm using the pxelinux version of tftp. Everything has worked well up to this point, however I've been trying to impliment a pxe bartpe solution in our office. Unfortunatly tftp is not passing the files correctly to the client. Here's the rundown. Server client connects to

I'm trying to boot multiple ISO files with pxelinux. Booting a single ISO file works, but if I put them in different sub directories it no longer works. I'm using the windows2003 sp1 trick to load my iso's (bartpe, winpe, erd commander, etc) pxelinux.0 gives me a menu: PROMPT 1 DEFAULT hdd TIMEOUT 100 DISPLAY PXE.MSG LABEL hdd LOCALBOOT 0 LABEL bartpe KERNEL

>Velu Erwan wrote: >>>The real reason is it dropped off my mental list, since I don't have any >>>way to test this stuff. >>> >>>Either way, I would actually prefer to see this done as a COM32 module, >>>similar to mboot, rather in the syslinux core if at all possible. >> >> I don't have the skill to do it but I can give my

I did 2 zip files containing each: - a working tftp-root with syslinux 3.75 - a not working tftp-root wit syslinux 3.81 They have ben build and tested using the instructions given in my first message. The bug appears starting syslinux 3.81, NOT 3.80 (I tried too many versions) The zip files are available here: http://t.bugier.free.fr/tftp-root--fail.zip

I'm trying to boot bartpe from gpxelinux I'm using gpxelinux and memdisk. my pxelinux.cfg/default looks as follows LABEL bartpe kernel memdisk initrd http://<path to iso> append iso raw Both of these I think I have working correctly. So my question I guess is for people that may have done this? Anyways I see the bartpe load screen then the xp load screen and then it blue

I am trying to create a DVD with ISOLinux as the bootloader to allow my users to select to install either Linux or Windows. Having read the article http://syslinux.zytor.com/archives/2002-October/001135.html i am left in a bit of a confused state as it sort of half explains things. All i think i need to know is: 1. What files are needed to boot windows? 2. Where do i have to place the

I am using the following simple menu and have noticed that items at the bottom are dropping off. I seem to be limited to 12 items. Is there a limit to how many items can be on the simple menu? default pxelinux.cfg/menu.c32 prompt 0 MENU TITLE UWSP PXE Boot Menu # TIMEOUT 200 LABEL bartpe MENU LABEL Build 12 KERNEL /STARTROM.0 APPEND keeppxe LABEL 11dnet MENU LABEL Build 11DNET beta