similar to: PXELinux sporadic hangs searching for config file

Hi all, I'm trying to convers some Cisco SSCP phones to the SIP formware. The phone boots, I see it tries to fetch a bunch of files on my TFTP: Jun 17 09:37:45 firewall dnsmasq-dhcp[21202]: DHCPACK(eth2) 192.168.10.103 6c:50:4d:da:f0:67 SEP6C504DDAF067 Jun 17 09:38:10 firewall in.tftpd[22666]: RRQ from 192.168.10.103 filename CTLSEP6C504DDAF067.tlv Jun 17 09:38:10 firewall in.tftpd[22666]:

Hi, I am trying to boot the PXEclient via pxeserver and I am getting an error "file not found", following are me setup in the /tftpboot: /tftpboot: initrd.img linuz pxelinux.0 /tftpboot/pxelinux.cfg default (lower case) in the default file: # This is the default pxelinux config file. LABEL test KERNEL vmlinuz APPEND

Greetings to all. I am hoping someone can help me out with a problem I am having getting my Cisco phones, 7960s and 7940s, to download the appropriate files from our TFTP server. The TFTP server is running on Fedora Core 4. The TFTP server appears to be setup properly: service tftp { socket_type = dgram protocol = udp wait =

Hello All, I just picked up 10 new 7960G's and having a hardtime upgrading the firmware on them. We already have 30 or 40 of these phones in production. Typically when I get a new phone, I just plug it into the voice vlan and it auto grades to the firmware in OS79XX.txt. Now whats happening is im getting a weird error during the reading of that file. Here's the output from the TFTP

hello, i'm having a wierd problem with 0.31 tftpd-hpa. i'm using xinetd, with this config: service tftp { disable = no socket_type = dgram wait = yes user = root log_on_failure += USERID bind = 10.13.0.254 server = /usr/sbin/in.tftpd

hello list, I am trying to setup a PXE boot server. Below are the details of the server: OS : Fedora Core 5 32-bit DHCP : dhcp 4.1 TFTP : tftp-hpa-5.0 Number of NIC : 2 eth0 : IP : 192.168.100.17, Subnet : 255.255.255.0, Gateway : 192.168.100.1 eth1 : IP : 192.168.1.1, Subnet : 255.255.255.0, Gateway : 192.168.1.1 Client: OS : None, fresh machine Number of NIC : 2 Intel Gigabit eth0 of server

Hi, i'm trying to boot an 135mb acronis iso image with syslinux but have no luck, client gets stuck[1] a few seconds after selecting the image - i used linux memdisk initrd acronis/acronis_home_2010_multi.iso append iso tftpd-log shows: Mar 25 14:45:15 smbsrv in.tftpd[18837]: RRQ from 192.168.0.102 filename pxelinux.cfg/default Mar 25 14:45:15 smbsrv in.tftpd[18838]: RRQ from 192.168.0.102

Here is a cut and paste from /var/log/messages from our TFTP server Aug 25 05:45:32 SALES in.tftpd[3206]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3206]: tftp: client does not accept options Aug 25 05:45:32 SALES in.tftpd[3207]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3208]: RRQ from 10.0.0.223 filename

Hi I have a problem with our pxelinux server, the server works for month without any problems. We use syslinux-3.51 version on an FC2 with in.tftp. Today I want to install a new server, but it fails after loading the kernel and booting stopped with this message ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered

Op 2013-08-26 om 09:35 schreef John McDonnell: > On Behalf Of Geert Stappers > Sent: Sunday, August 25, 2013 6:42 AM > > > > On my previous TFTP server I had logging. I did see all requests > > in logfiles. > > > > On my current TFTP server I have also added the options '-v -v -v', > > but no logging. At least I can't find it them in

I'm setting up UEFI booting and got to the point of having the system talk to the dhcpd/tftpd server, grab the first image files (syslinux.efi) and then continuously request the secondary image file (ldlinux.e64). I'm wondering if I'm missing something or if someone can point me in the right direction of trouble shooting this. The tftp root has all the files to boot a BIOS type

Hi, when i look in my syslog i see. (syslog) Mar 12 04:40:49 linuxdev in.tftpd[15218]: RRQ from 10.1.5.121 filename scx.elf.gz Mar 12 04:40:49 linuxdev in.tftpd[15218]: sending NAK (1, File not found) to 10.1.5.121 here my client has asked for a file, and tftpd has said that it does not exist in its path (or cannot access it). looking in the tftpd.c (from 0.36) i see that on line 779 this

Hello, On my previous TFTP server I had logging. I did see all requests in logfiles. On my current TFTP server I have also added the options '-v -v -v', but nog logging. At least I can't find it them in /var/log/*/* Where does tftpd-hpa writes it's logging? Groeten Geert Stappers -- Leven en laten leven

Machine using HP DL380 Gen9 server Initially I got problem where boot hung at My IP 0.0.0.0 Then I referred to http://www.syslinux.org/archives/2015-June/023641.html And used the patch provided then it again hung but at different step Getting cached packet My IP 192.168.103.41 (hung here) >From /var/log/messages Oct 7 01:16:10 foreman in.tftpd[43905]: RRQ from 192.168.103.41 filename

I've dug through the documentation, and I must have just glanced over this, but how do I set this system up so it executes the call when 4 digits have been entered. Currently it seems to be operating on a timeout system. Cisco 7940's Right now if I press the digits 6000 the phone waits like 8 seconds before going forward. (If I press dial it is immediate). Anybody? -C

Hi, I am trying to load kernel 2.6.6 on a Soekris net4521 from the network using PXE. I built my initrd with mkinitrd. RedHat nash (while running linuxrc) hangs after mounting /proc and says "Creating block devices". I am using the pxelinux.0 from the syslinux-2.10 distribution and the kernel and initrd were built on redhat 9.0. I built my kernel with BLK_DEV_RAM, RAMFS, TMPFS,

Anyone else seeing problems doing pxe boots off the latest dag/rpmforge syslinux packages? Versions 3.35 works, doing the tftp request like this: Jun 18 06:01:19 boothost in.tftpd[25947]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.0 Jun 18 06:01:19 boothost in.tftpd[25947]: tftp: client does not accept options Jun 18 06:01:19 boothost in.tftpd[25948]: RRQ from 172.16.0.26

Gene wrote: > On Wed, Oct 7, 2015 at 7:58 AM, Ashish, Shivendra <shivendra.ashish at hpe.com> wrote: >> Still getting error >> >> Disable uderdefault address > > 1) I'm presuming this is actually "disable UseDefaultAddress" > >> Core_udp_sento: udp->configure unsuccessful >> >> This message lopping in console > > Not

I've found a problem, and I think it is in syslinux (specifically when it tries to load ldlinux.e64 under hyper-V). I have a physical computer with a Gigabyte GA-P85-D3 motherboard that successfully pxeboots using the EFI images, and I hold that up as exhibit 1 that my deployment environment works. It also implies that the syslinux.efi image works in some cases, but not in all. My Hyper-V

Hi, We currently use pxelinux and tftp-hpa for pxe booting new machines and installing our OS of choice. This has worked great for the past year, and just about every HP laptop we've tried so far has worked flawlessy, until now...? We recently bought a bunch of HP ProBook 6570b laptops but couldn't get them to work with our pxelinux setup. What we see is that the 6570b stops at the