similar to: TFTP support multiple NICs?

Hello, I have set up 2 PXE servers, on Linux Debian Sarge and Etch, on which I use syslinux + ISC dhcp3 + tftp-hpa for booting. The older one, on Sarge, has been working fine for more than a year, great :-) The new one, on Etch, with the exact same config files, does not : the DHCP part seems to work, but at the end pxelinux seems to lose the server's IP address; this what I see on the

I'm trying to boot linux on a VIA EPIA-M board (a Nehemiah-based M10000), and I'm having some trouble with it. I'm watching the network transactions with ethereal, and I'm seeing a failure at what appears to be the tftp stage. The M10000 picks up its IP address from the dhcp server (ISC DHCP3), and reports it correctly on the screen. Then the tftp session starts, and I get the

Hello ! I'm french, my english is bad :-( I want to boot a computer by network which have a 3Com network card. So I use isc-DHCP, TFTP-hpa and PXELinux. The computer start, make a dhcp request, receive the configuration. The next step is to contact the tftp server to get pxelinux.0 and the configuration. Stop me if I made an error ;) So, in the network I want to use it, there is a dhcp

Hello, I've got several machines which I'm trying to netboot, the setup is a bootserver using dhcpd3 and tftpd-hpa. When a machine boots up, it gets an ip address and downloads pxelinux.0 from the server, then it starts searching for pxelinux.cfg/[MACADDRESS] pxelinux.cfg/0A0000F0 and so on. On the server side I see in the syslog the client's DHCP-request and the client downloading

hey guys, I have a really silly question for you! I just built a cobbler server that I am using to bare metal some boxes. But I am a bit n00b and need to figure out which ports to open in iptables. Here's a start: xinetd 2031 root 8u IPv4 94306 UDP *:tftp in.tftpd 9203 root cwd DIR 253,0 4096 588097 /tftpboot

From: "Roy.Li" <rongqing.li at windriver.com> Add error check when write file, the caller can detect if the disk filled up (or had an i/o error) and return a NOSAPCE nak to the other side. Signed-off-by: Ming Liu <ming.liu at windriver.com> Signed-off-by: Roy.Li <rongqing.li at windriver.com> --- common/tftpsubs.c | 4 +++- tftpd/tftpd.c | 12 ++++++++++-- 2

Hi, I have a tftp client which loads quite happily from a tftpd built from netkit-tftp-0.16 but which fails to load from from a tftpd built from tftp-hpa 0.29. In both cases, tftpd was built from pristine sources and run from xinetd under Redhat 7.3. [netkit-tftp-0.16 is the ancestor of tftp-hpa, predating HPA's maintenance of same] [the tftp client also.. .. fails with the prebuilt tftpd

Greetings to all. I am hoping someone can help me out with a problem I am having getting my Cisco phones, 7960s and 7940s, to download the appropriate files from our TFTP server. The TFTP server is running on Fedora Core 4. The TFTP server appears to be setup properly: service tftp { socket_type = dgram protocol = udp wait =

I have got a Solaris 9 package build from the latest tftp software at ftp.kernel.org. When I do the following: ./in.tftpd -l -s /tftpboot -m /tftprules -v The tftp server does not start. The error in /var/adm/messages is "too many -s directories". If i do ./in.tftpd -l -s /tftpboot -v then it works fine. But i need remap feature for my project. The message I get when i do

Background, Client - realtek rtl8111c tftpd version is 5.0 options on use -l -v Client: PXE-EX32 TFTP Open Timeout Server: Jun 12 10:48:38 damar in.tftpd[30132]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:48:48 damar in.tftpd[30133]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:49:24 damar in.tftpd[30134]: RRQ from 192.168.1.107 filename gpxelinux.0 Jun 12 10:50:36 damar

I've got a system (Supermicro P8SCT) that lacks a floppy or CD and it's old enough that it won't boot from a USB stick. Before I scrounge an optical drive to plug in, I thought perhaps I could install over the network, as I see "legacy LAN boot" in the BIOS menu. The guides for a LAN install I've found all want to do an automated kickstart install. Are there any

Hi! I hope this is the right list for sending tftpd-patches - if not, please point me in the right direction... I experienced quite strange problems when trying to use tftp-hpa in newer Cygwin versions. It simply isn't able to parse its command line correctly because it seems to use another optind variable than getopt(). When you try to start it with something like tftpd.exe -s /mypath

From: Ron <ron at debian.org> Hi, I've just taken over maintaining the packages for this in Debian, and we've been carrying a couple of patches for a while now that really should have been forwarded since they're clearly not distro specific. I added a third one to that yesterday to fix another autoconf build 'race' seen when doing parallel builds. Cheers, Ron

On Jul 14, 2013 10:02 PM, "Victor Sudakov" <vas at mpeks.tomsk.su> wrote: > > I have tried replacing the IP address with a DNS name like this: > > LABEL WDS1 > Menu LABEL WDS1 > com32 pxechn.c32 > append ws150.sibptus.transneft.ru::boot\x86\wdsnbp.com -W -o 66.x=0a:0e:8d:96 Did you try without "-o 66..."? Any chance for a packet capture from a

Hi, I'm trying to debug crashing server, and I'm starting to suspect tftp server as one of possible culprits. The box is quad core Xeon with 4GB of memory serving as Asterisk PBX + some additional services (reporting, IS integration etc). Among others, it's also serving as provisioning box for over hundred of SPA504 phones. Phones are checking configuration files every 60s meaning

Hi, recently, tftp-hpa has started to fail to build on mips and mipsel with the following error: ---snip--- [...] make -C tftpd [...] gcc -g -O2 -W -Wall -Wpointer-arith -Wbad-function-cast -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wwrite-strings -Wundef -Wshadow -Wsign-compare -pipe -fno-strict-aliasing -I/build/buildd/tftp-hpa-5.0 -c

First- I'm admittedly a newbie both to the cygwin environment and to the hpa tftp. My apologies if this is the wrong list to ask this question. If so, slap me around a little.... I tried to build tftp-hpa under cygwin. The 0.37 version throws errors during the ./configure process, warning about winsock2.h and winsock.h being present but not buildable. The 0.36 version appears to

I've used TFTP server on CentOS/RHEL 7 and 8 but not 9, so take my notes with the appropriate grain of salt... JIC, confirm on the TFTP server you have a process socket for it, e.g. $ netstat -a | grep tftp udp 0 0 0.0.0.0:tftp 0.0.0.0:* Your 'systemctl status' output implies things are OK, but worth a check. I don't see a "tftpboot" symlink

Hello, I am attempting pxelinux via dhcpd/tftpd. If I use the system default tftpd daemon, then pxelinux loads but then complains about the tsize option. I've downloaded tftp-hpa-0.34, compiled and installed. I also edited inetd.conf according to README.security and then reloaded inetd. /tftpboot directory and all files and directories have nobody:nobody for permissions with at least read

Hi I'm working on an update of the openbsd tftpd, mainly to support RFC 2349 (tsize option; and 2347-2348 too). In fact, i backport from tftp-hpa (which came from an old openbsd cvs). I know, i can use tftp-hpa but first it doesn't compile on openbsd, second, i hope the backport could be include in openbsd cvs ... does someone know a tftp client or a test to really know what is good or