similar to: chaining multiple and separate pxelinux.0

I want to chain multiple servers with pxelinux initiated from a ris server. (Correct me if i'm wrong) The Ris server sends a tftp-path-prefix location where the pxelinux.cfg is searched. On the ris server I have entries like: label server2 kernel 192.168.1.2::pxelinux.0 This fetches the pxelinux from server2 but the pxeconfig.cfg from server1 is used. Can I overrule this with an

I was trying to use my windows RIS server to deploy linux so as to require user authentication. After seaching the internet I found that it was possible but not very well explained after alot of tinkering I eventually got it to work. Here is my documentation so hopefully others can do it in less time than I, feel free to comment and improve.. ************************ On RIS Server Create

I noticed some links and suggestions on the SYSLINUX web site that reference how to run TFTP on Windows 2000 Server. Two of them suggest installing RIS, and one of them points to a third-party utility. I don't need to install RIS, because I don't want to run Windows setup over PXE. (In fact, I want to use PXELINUX to boot a DOS floppy and run Symantec Ghost to deploy an image.) Also, I

Hi folks, I'm finally tired of dealing with floppy disks to control our remote installs and thought that PXELINUX sound like a great way to go. However, I've got multiple hurdles and I'd like some advice before I get myself dug in too deep... We currently have Solaris Jumpstart and Windows RIS running in the department and now we would like to intermix Linux PXELINUX booting. Any

Christian "Dr. Disk" Henchelmann just sent me a nice writeup on how to set up PXELINUX and Windoze RIS at the same time. I've posted his writeup on the web: http://syslinux.zytor.com/ris.php I hope this is useful for some people :) -hpa

This message is from Luis F. Correia, who unfortunately could not post it himself to the list.... ---------------------------------------------------------------------------- -- Hi! I would like to thank you, H. Peter Anvin for creating this wonderful set of tools. The only thing that bothers me is the lack of proper examples in the docs. Syslinux and affiliates would certainly improve

Having the same trouble that Mark ( http://www.zytor.com/pipermail/syslinux/2002-March/000244.html) had over a test platform I have here. Having a redhat 7.3 with dhcp V3.0rc12 and atftp (0.6.2) on a local small hub and a W2k Server with RIS installed. If I stop binlsvc on nt server my network boot run ok to pxelinux, but as soon as binlsvc is started, RIS server always respond over my local

Good day Shao Miller > Regarding the Windows XP RIS corrupt filename WINNT.SIF filename bug: > > I've already explained the bug and think it would be good for you to try > out the latest PXELINUX.0 (compiled from the latest Syslinux in its > project git repository). You can get pretty close by using the link I > sent before. > I will be very busy until next month.

I've put up some notes on my experiences which I hope will be useful to some people, especially since there is so little information on the Web. Perhaps they could be added to the pxelinux site. http://www.tarantule.btinternet.co.uk/ris.htm Patrick

I did 2 zip files containing each: - a working tftp-root with syslinux 3.75 - a not working tftp-root wit syslinux 3.81 They have ben build and tested using the instructions given in my first message. The bug appears starting syslinux 3.81, NOT 3.80 (I tried too many versions) The zip files are available here: http://t.bugier.free.fr/tftp-root--fail.zip

HI there. Probably my message is a bit off topic but I do not know where else I could be asking. . I'm running a linux terminal server with one client provided with a 3C509B ISA card. I boot the later with a floppy bootable rom image taken from http://www.rom-o-matic.net/ Everything is working just fine. I decided to try to set up a PXE network boot (I'll needed it for installing a

After ordering the table of membership degrees , i must get the difference between the first and second coloumns , between the first and second largest membership degree of object i. This for K=2,K=3,....to K.max=6. This difference is multiplyed by the Crisp silhouette index vector (si). Too it dependending on K=2,...,K.max=6; the result divided by the sum of these differences I need a final

Hi, I've recently did some extensive testing with PXELinux and I must say it's great! I've tested it with several pc's and VMware vm's at home, this works flawlessly. However at my work, we only use MS Virtual PC 2007 and so on. I've started today to testimplement pxelinux into wds/ris, this seems to work but when I want to display a menu eg: default menu.c32, then

Hello I'm working on my RIS server; I got a problem when I use pxelinux.0 to load setupldr.exe from windows XP 32bits (both home and corporate) Here is how I configure a working server, then how to modify it to reproduce the bug: ========================= I suppose you got -a dhcp server configured to load pxelinux.0 to client computer. -a working tftp server (mine is tftpd-hpa, with a rule

After about 15 hours, a packet sniffer and a ton of google searching later, I have a solution to getting WDS (Windows Deployment Services) to work with PXELINUX Google didn't turn up anything of use directly, everything that was referenced appeared to be related to starting pxelinux from either WDS or RIS. That just won't do, since they often can give hiccups and lockups when

Will McDonald wrote: > On 01/02/06, Plant, Dean <dean.plant at roke.co.uk> wrote: >> We are thinking of using pxe boot with a windows ris server to start >> off a Centos 4 install. Does anyone know if this is possible? > > I've never done it myself but turned up a few links a few weeks back > which imply it's feasible... > >

Hello, I'm still trying to setup RIS (Remote Installation Service -w2k) with PXE Linux, but before that I must say that the mail list archive is a _good_ idea. Back to RIS. When I start from pxelinux memdisk initrd=risbootdisk.img I get an error: No UNDI Driver found. The risbootdisk.img is a bootdisk from Microsoft, which starts a RIS installation. When I boot from floppy it works fine,

> On 9/23/2015 2:08 PM, Ady via Syslinux wrote: > > > Even if it still hangs with this test, does it hang exactly as before > > (i.e. shows only one character and hangs immediately)? > > It happens with one entry, or two entries, or three. > The configuration works otherwise perfectly on any other environment. > > If I simplify to the the following, it still

On Mon, Sep 21, 2015 at 6:23 PM, Alan Sparks via Syslinux <syslinux at zytor.com> wrote: > If this is asked before, please point me at the answer, can't find it... I seem to recall seeing this before. > With pxelinux 3.8.6 (or, < 5.x), I was able to chain boot pxelinux.0 > from ipxe, having set appropriate values for DHCP options 210 and 209 > for the remote file path

On Mon, Sep 21, 2015 at 8:02 PM, Alan Sparks <asparks at doublesparks.net> wrote: > On 9/21/2015 5:44 PM, Gene Cumm wrote: >> On Mon, Sep 21, 2015 at 6:23 PM, Alan Sparks via Syslinux >>> With pxelinux 3.8.6 (or, < 5.x), I was able to chain boot pxelinux.0 >>> from ipxe, having set appropriate values for DHCP options 210 and 209 >>> for the remote file