similar to: Making tftp-hpa ignore files

Answers below. At 05:13 AM 9/6/2015, Geert Stappers via Syslinux wrote: >On Sat, Sep 05, 2015 at 09:55:45AM -0500, John via Syslinux wrote: > > At 03:21 PM 9/2/2015, Geert Stappers via Syslinux wrote: > > > > Still having trouble: > > (-: Welcome to real life :-) > > > > > cd /tmp > >Please confirm that it is done at the notyetOpenWRT device at

Thank you for the info Groeten. I have the TFTPD-HPA server address set to 192.168.1.9:69 I am unable to ping this address and I wonder if the server address should be the same as the network interface card (ethernet card) I am using. The files I want to upload are in /srv/tftpboot, so I'm not sure why the command cd /tmp was used. John At 03:21 PM 9/2/2015, Geert Stappers via Syslinux

First- I'm admittedly a newbie both to the cygwin environment and to the hpa tftp. My apologies if this is the wrong list to ask this question. If so, slap me around a little.... I tried to build tftp-hpa under cygwin. The 0.37 version throws errors during the ./configure process, warning about winsock2.h and winsock.h being present but not buildable. The 0.36 version appears to

Hello, This about remapping in the HPA tftp server. A client does request for '/tftpboot/ncd4/foo' which should be 'ncd4/foo' I have created a remap file that looks now like this: r tftpboot/ncd4/modshmx/login.hmx ncd4/modshmx/login.hmx r tftpboot/ncd4/modshmx/setup.hmx ncd4/modshmx/setup.hmx r tftpboot/ncd4/modshmx/term.hmx ncd4/modshmx/term.hmx Because r

Hello, A host of mine which acts as a gateway for a cluster also acts as a dhcp and tftp server for the cluster nodes. Recently, for reasons that are not really important we changed the interfaces so that eth0 is conencted to our production network and the eth1 network is connected to the cluster's internal network. It was the opposite before. Normally, we want most of the services running on

Hi, I have a question on tftpd on Slackware - I know this is an embedded Linux forum, but I think it still must be the appropriate place to ask. I have hpa-tftpd V0.40 on Slackware 9.1. No matter what I do, I can't get files transferred to the tftp server. I just get timeouts - no messages in /var/log/messages or in /var/log/syslog - just dealthly silence. This is the configuration line

If I omit --secure from the tftpd-hpa command line, I then need to e.g. `tftp -c get /var/lib/tftpboot/vmlinuz` instead of plain /vmlinuz, even though I pass /var/lib/tftpboot as the tftp dir in the tftpd-hpa command line. That essentially means that I'm exporting my whole /, which is clearly something I don't want to do. I basically want tftpd-hpa to serve files from /var/lib/tftpboot

I've used TFTP server on CentOS/RHEL 7 and 8 but not 9, so take my notes with the appropriate grain of salt... JIC, confirm on the TFTP server you have a process socket for it, e.g. $ netstat -a | grep tftp udp 0 0 0.0.0.0:tftp 0.0.0.0:* Your 'systemctl status' output implies things are OK, but worth a check. I don't see a "tftpboot" symlink

Here is what I had: root at shaz:/var/lib/tftpboot # ls -l total 1680 lrwxrwxrwx 1 root root 71 2005-06-11 11:17 pxelinux.0 -> /var/www/ubuntu-breezy/install/netboot/ubuntu-installer/i386/pxelinux.0 dr-xr-xr-x 2 root root 4096 2005-06-11 11:21 pxelinux.cfg drwxr-xr-x 2 root root 4096 2005-06-11 11:20 ubuntu-breezy and I got "File not found" kind of error on pxeboot -

i am using tftp-hpa 0.32 to transfer boot image files of an aix 5.2 system. packets begin to go across the network and then they stop at about 4200 packets. when i boot from aix bootp server 15227 packets are transfered. i have tried with both xinetd and standalone modes with many different options. i am not sure why it is failing to transfer the entire image. are there certain options with

I have got a Solaris 9 package build from the latest tftp software at ftp.kernel.org. When I do the following: ./in.tftpd -l -s /tftpboot -m /tftprules -v The tftp server does not start. The error in /var/adm/messages is "too many -s directories". If i do ./in.tftpd -l -s /tftpboot -v then it works fine. But i need remap feature for my project. The message I get when i do

I have spent the last two hours on this issue. I think there's a problem with tftp-hpa. Setup: attempting to use Debian FAI, but there is definitely a problem with PXELINUX. pxelinux.0 is obviously being loaded by clients, but *nothing* in the pxelinux.cfg directory can be loaded. Clients sit and spin on their MAC files and when they get to default nothing happens. This is

Hello everyone, I am having difficulties in setting up a tftp server on a Fedora 3.14.8-200.fc20.x86_64. Running tftp client to test the server functionality, a simple get from the terminal prompts 'Transfer timed out.' back. The version is tftp-hpa 5.2, with remap, with tcpwrappers, unfortunately I am not able to find any log in the system journal.? The server and related services appear

I did the following to setup the tftp server. Download tftp from ftp://ftp.kernel.org/pub/software/network/tftp/tftp-0.40.bz2 tar -jxvf tftp-0.40.bz2 cd tftp-0.40 make make install mkdir /tftpboot chmod 777 /tftpboot chown nobody:nobody /tftpboot changed /etc/xinetd.d/tftp file to "disable no" service xinetd restart Now when I connect I get in /var/log/messages "tftpd: read(ack):

Hi all, I have a centos 5 box I have setup, current with updates. (I have done this many times on centos 4). I did the yum install tftp-server, changed the /etc/xinetd.d/tftp file as shown. # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download

Hello, ?? I am a fairly experienced user.? I have set up tftp in the past at various times, although it's been a few years. I am using version... Version????? : 5.2 Release????? : 37.el9 On AlmaLinux 9.3, I currently have SELinux disabled. ]# firewall-cmd --list-services cockpit dhcp dhcpv6-client http ssh tftp I have tftp enabled on the firewall.? ( I have tried with the firewall completely

Hi Friends, I am trying to configure a tftp server on Centos 5.0. get command is working fine but not the put command. I searched on the google and tried few things like 777 on /tftpboot, changing ownership to nobody on /tftpboot and also in /etc/xinetd.d/tftp, adding -c as server_args but still the problem persists. tftp -v localhost Connected to localhost.localdomain (127.0.0.1), port 69

Hello, I am attempting pxelinux via dhcpd/tftpd. If I use the system default tftpd daemon, then pxelinux loads but then complains about the tsize option. I've downloaded tftp-hpa-0.34, compiled and installed. I also edited inetd.conf according to README.security and then reloaded inetd. /tftpboot directory and all files and directories have nobody:nobody for permissions with at least read

Hi all, I'm trying to setup a TFTP server to serve as repository for the config of all my Cisco network devices. As per the the tftpd man, I've added the "-c" option into the /etc/ xinetd.d/tftp (as follows) but I still cannot get write access (unless the file is already present). [root at chl1 ~]# cd /etc/xinetd.d [root at chl1 xinetd.d]# cat tftp # default: off #

Hello. In my case I can successfully boot up my Thinkpad X32, but the same configuration doesn't work for my desktop computer with Intel network card, with Intel Boot Agent 2.2 DHCP server is 10.0.0.1, tftpd (used tftp-hpa) runs on 10.0.0.32. netstat told me the daemon listen to 69 UDP port just fine. running tftp in commandline also shows it works (retrieve pxelinux.0 less then 1 second).