similar to: Determining 32/64 bit install

Hi, I have been using pxelinux for quite a while. It works extremely well for us. Now, I am looking at something new. We would like to: boot ( some OS - hopefully linux )from the network using pxelinux. make a small partition dos partition on the first disk. connect ( via perl dbi ) to a back end database Download the appropriate files for either a winxp build OR a kernel/ramdisk for a

Hello, We are having problems booting disk images and are looking for a little help. Here is the screen capture of what we see: http://www.kmaclub.com/syslinux/largefloppy.png We have also tried using images from http://severinterrier.free.fr/Boot/ImgBoot/ with a similar result. Basically, memdisk loads the images and then it hangs. label linux kernel memdisk append

Hello everyone, Since I have some some adventures in UEFI PXE booting ahead I tried to go with the latest syslinux development snapshot in this case 5.10pre1. But I already fail when booting from CD with Failed to load COM32 file .c32 I am a bit perplex since no name of COM32 files is given. I am trying to trace down the issue as good as I can. COM32 files present are:

Have been using syslinux for some time for my g4l project, and was just looking at the new 5.00. Normally have just copied the new files, but with version 5.00 it is missing the support files according to ldd, and even putting the missing files in the directory failes to find them. ../../com32/... Script to copy files from new syslinux directory to the projects isolinux directory that is

> On Thu, Dec 10, 2015 at 5:15 PM, Sebastian Herbszt <herbszt at gmx.de> wrote: > > Gene Cumm wrote: > >> On Tue, Dec 1, 2015 at 3:02 PM, Erwan Velu via Syslinux > >> <syslinux at zytor.com> wrote: > >> > Hi folks, > >> > > >> > As per Ady request (thanks for the reminder), I forgot to send the patches > >> > I

Gene Cumm wrote: > On Sat, Dec 12, 2015 at 8:21 AM, Ady via Syslinux <syslinux at zytor.com> wrote: > > > >> On Thu, Dec 10, 2015 at 5:15 PM, Sebastian Herbszt <herbszt at gmx.de> wrote: > >> > Gene Cumm wrote: > >> >> On Tue, Dec 1, 2015 at 3:02 PM, Erwan Velu via Syslinux > >> >> <syslinux at zytor.com> wrote: >

Gene Cumm wrote: > On Thu, Dec 10, 2015 at 5:15 PM, Sebastian Herbszt <herbszt at gmx.de> wrote: > > Gene Cumm wrote: > >> On Tue, Dec 1, 2015 at 3:02 PM, Erwan Velu via Syslinux > >> <syslinux at zytor.com> wrote: > >> > Hi folks, > >> > > >> > As per Ady request (thanks for the reminder), I forgot to send the patches >

Hi, I've been using Isolinux Boot CD for a while now and it's working great. This weekend, I decided to install it on my hard drive so I can boot Isolinux of the Hard drive. I used the famous command : "syslinux -s c:" to initialize the drive then I copied all the .img file to that drive. Then I renamed the "isolinux.cfg" to "syslinux.cfg" to get to my

On 13.07.2015 18:48, Gene Cumm wrote: > On Mon, Jul 13, 2015 at 10:20 AM, poma <pomidorabelisima at gmail.com> wrote: >> On 13.07.2015 15:19, Gene Cumm wrote: >>> On Mon, Jul 13, 2015 at 9:03 AM, poma <pomidorabelisima at gmail.com> wrote: >>>> On 13.07.2015 14:53, Gene Cumm wrote: >>>>> On Mon, Jul 13, 2015 at 6:42 AM, poma

Can't hold it off any longer... here it is :) Changes in 2.00: * ALL: Add support for "COM32" (32-bit COMBOOT) images. * ALL: Add an API for COMBOOT/COM32 images. See comboot.doc for details. There is a C development environment for COM32 being created; it should be ready at some point in the future. * Fix mbr.asm so that it

I am using memdisk to remotely flash the BIOS and other firmware. It works well for most flash programs. After the flash I need to initialize the NIC to send a signal to my management server that the flash is complete. I am curious as to how others have solved this problem. Thanks.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hello. I'm trying to setup an multiboot USB, mainly to install Debian using netinst images. I've mounted one of iso image and copied to a directory in USB (made with syslinux 6.03) and copied too the kernel and initrd for hd install. I've setup a directory to start the USB and, well it starts, but when I jump (using CONFIG) to the

I understand the reasoning behind not integrating the dirty gfxboot patch into isolinux and pxelinux, but with many of the major distributions implementing gfxboot, it would be nice for a seamless boot interface across syslinux, isolinux and pxelinux so that the same menu file, look and feel, can be used to boot from the hard drive, USB thumb drive, floppy, or PXE. With isolinux being the primary

On Thu, May 12, 2016 at 2:14 PM, Janz, Burt via Syslinux <syslinux at zytor.com> wrote: > Hi Geert, > > I'm building syslinux 6.04 from scratch to prevent any issues with mismatched com32 modules. This gives me a "pure" set of modules as well as "pure" isolinux and syslinux cores. 6.04 hasn't seen a full release, only the pre1 pre-release. >

On Sun, Jan 18, 2015 at 6:44 AM, Angel <angelv64 at gmail.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Hello. > > I'm trying to setup an multiboot USB, mainly to install Debian using > netinst images. > > I've mounted one of iso image and copied to a directory in USB (made > with syslinux 6.03) and copied too the kernel and initrd

On 01.07.2015 12:10, Gene Cumm wrote: > On Wed, Jul 1, 2015 at 4:35 AM, poma <pomidorabelisima at gmail.com> wrote: >> >> To remind you once again. >> ISOLINUX >= 6.00 built with GCC >= 5.0.0 causes a broken boot. >> This relates specifically to the use of the vesamenu.c32, >> menu.c32 works without problemos. > > isolinux-debug.bin is not for

I know there's a module to check which syslinux bootloader was used, but is there also a module for detecting MEMDISK? Basicly I want to use the same isolinux.cfg for a CD which boots an ISO. Issue is that the inner ISO also uses same Isolinux (+ menu), which isn't very user-friendly. So: CD --> ISOLINUX (menu) --> MEMDISK CDROM.ISO --> ISOLINUX (menu) --> diskette

For several years now, I've been using Syslinux/Isolinux to load boot systems and love it. At times, I've messed up making a config file or forgotten the name of a file on the CD (or USB flash drive) and didn't want to take the time to load the CD into another machine or boot a DOS or Linux OS to search. The ability to browse the CD/USB drive would prove beneficial in these

i`ve found a bug in chain.c32 in v4.06. When i use isolinux it does not run windows7 installation, chainloading bootmgr. the error is: Can't find myself on the drive I booted from. chain.c32 from syslinux 3.xx works like a charm! chain.c32 from syslinux 5 shous tat this is not a com32 app

On Thu, May 12, 2016 at 06:16:46PM +0200, Good Old Idea via Syslinux wrote: > On Thu, May 12, 2016 at 02:29:52PM +0000, Janz, Burt via Syslinux wrote: > > I have a need to display text to COM2 before loading a kernel. > > The easiest way to do this was to invade menu.c32 (menumain.c) and > > add a function to send the string out to the serial port just before > > the