similar to: Memdisk & seagate diagnostic tool

Hi! I've got a USB key with several tools (small linux, memtest86+) booting via syslinux. But now I have to add powermax.exe (a MSDOS tool to test Maxtor disks) on this key. As I've always been on Unix/Linux system, I don't know what to do to run powermax.exe from syslinux. I've made a boot floppy disk and tried to copy everything on my usb key and put the command.com in kernel

>From: Vanessa Conchodon <v.conchodon at smie.com> >Subject: [syslinux] booting on a dos software >But now I have to add powermax.exe (a MSDOS tool to test Maxtor >disks) on this key. >As I've always been on Unix/Linux system, I don't know what >to do to run powermax.exe from syslinux. >I've made a boot floppy disk and tried to copy everything >on my usb

I've been using a USB flash drive for quite a while now, and in my previous system it worked great, but, I find with my new motherboard now that I have upgraded I can't boot it. So I decided to try the trick mentioned in the README.usbkey file where you make a ZIP drive like image on the flash drive and set the BIOS to boot a USB ZIP drive instead. Unfortunately, it still doesn't

FYI, Seagate has announced a new enterprise SSD. The specs appear to be competitive: + 2.5" form factor + 5 year warranty + power loss protection + 0.44% annual failure rate (AFR) (2M hours MTBF, IMHO too low :-) + UER 1e-16 (new), 1e-15 (5 years) + 30,000/25,000 4 KB read IOPS (peak/aligned zero offset) + 30,000/10,500 4 KB write IOPS (peak/aligned zero offset)

On Wed, Sep 26, 2018 at 3:37 PM, lejeczek via CentOS <centos at centos.org> wrote: > > > On 26/09/18 20:19, Mauricio Tavares wrote: >> >> If ti makes you feel any better, I am not having stellar service from >> WD's support. In fact, they act like they never received the HD I sent >> for RMA whose tracking number says they did 10 days ago. >>

On 26/09/18 19:16, lejeczek via CentOS wrote: > hi guys > > I have rather a large set of Seagate's SAS ST32000444SS, over a > hundred - experience I'm having from those in conjunction with their > tech support is abysmal. > > I'm trying to update firmware of these drives and nothing works, > including tech support. > > ... and I cannot help but wonder -

Hi, I've got Samba 2.0.2 on a Linux Red Hat 5.2 and a server NT4 SP3 with Seagate BackupExec 7.0. When I want to backup Samba with Seagate BackupExec, I get a message saying "Unable to connect to server, <F5> to retry", and then another one saying "A device specific error occured". I've read all the Samba archive about that subject, but I do not find any

Hi, I'm searching for 2 months on this problem (I've searched in the archive of course and I've sent a message on this mailing list, the suggestions had helped me but I didn't manage to resolve the problem). The problem: ------------ I've got Samba 2.0.2 on a Linux Red Hat 5.2 and a server NT4 SP3 with Seagate BackupExec 7.0. When I want to backup Samba with Seagate

All, I have a problem with a new Seagate hard disk. The problem occurs when i go to install CentOS, i insert the cd and start the boot up process, when it gets to the section where it detects the hard disks, the driver is seems crashes, the message it produces complains about no one caring about a interrupt on IRQ11. The hard disk is a Seagate 200GB 8MB SATA150 NCQ drive, on a SilliconImage

Hi there, http://www.seagate.com/support/disc/download/seatoold_en.exe Seagate offers a Windows executable (needs Win98 or better, 1,9MB) that should create 2 bootable floppy disks that contain a harddrive check program. Invoking "wine seatoold_en.exe" works, but when the floppy should be written, an error occurs "insert 1.44 MB...click retry". I tried to mount a DOS

Hi list I am running out of space on my notebook. So wanna buy additional and external storage. I don't wanna do a DIY-work, so searching for pre-built external hard disks. I wish to buy Seagate FreeAgent Pro [0]. Does it work under CentOS 5? Would you recommend me even better products? I am searching for good performance, noise-less, smart standard support and no useless features like

On 26/09/18 20:19, Mauricio Tavares wrote: > If ti makes you feel any better, I am not having stellar service from > WD's support. In fact, they act like they never received the HD I sent > for RMA whose tracking number says they did 10 days ago. > > On Wed, Sep 26, 2018 at 2:16 PM, lejeczek via CentOS <centos at centos.org> wrote: >> hi guys >> >> I have

Hi all, I''m getting a very strange problem with a recent OpenSolaris b134 install. System is: Supermicro X5DP8-G2 BIOS 1.6a 2x Supermicro AOC-SAT2-MV8 1.0b 11 Seagate Barracuda 1TB ES.2 ST31000340NS drives If I have any of the 11 1TB Seagate drives plugged into the controller, the AOC-SAT2-MV8 BIOS appears to detect them just fine, but I get the following problems: 1. Grub takes a

If ti makes you feel any better, I am not having stellar service from WD's support. In fact, they act like they never received the HD I sent for RMA whose tracking number says they did 10 days ago. On Wed, Sep 26, 2018 at 2:16 PM, lejeczek via CentOS <centos at centos.org> wrote: > hi guys > > I have rather a large set of Seagate's SAS ST32000444SS, over a hundred - >

Hi all, As a disclaimer, I'm new to this list and very green administering CentOS. I run it on my test servers and do very basic networking and server administration (most users, permissions, and web app stuff). I have a backup server that I am using rsync to collect important in-process file for our digital library from both Windows and Linux servers, as well as a specific applications

Hi list, I''ve got a system with 3 WD and 3 seagate drives. Today I got an email that zpool status indicated one of the seagate drives as REMOVED. I''ve tried clearing the error but the pool becomes faulted again. Taken out the offending drive and plugged into a windows box with seatools install. Unfortunately seatools finds nothing wrong with the drive. Windows seems to see

Hello, Does anyone have experience backing up their samba SMB shares with an NT-based backup system? I'm using Seagate Backup Exec 7.0, and whenever I select a share on Samba, I get a message saying "Unable to connect to server, <F5> to retry", and then another one saying "A device specefic error occured". My samba shares are all fully operational (I can access them

hi guys I have rather a large set of Seagate's SAS ST32000444SS, over a hundred - experience I'm having from those in conjunction with their tech support is abysmal. I'm trying to update firmware of these drives and nothing works, including tech support. ... and I cannot help but wonder - is just me who is so unlucky and getting very, very poor support(taking naturally only of

Happy Friday, List! I''m spec''ing out a Thumper-esque solution and having trouble finding my favorite Hitachi Ultrastar 2TB drives at a reasonable post-flood price. The Seagate Constellations seem pretty reasonable given the market circumstances but I don''t have any experience with them. Anybody using these in their ZFS systems and have you had good luck? Also, if

Hi, Does anyone use Seagate ST32000542AS disks with ZFS? I wonder if the performance is not that ugly as with WD Green WD20EARS disks. Thanks, -- Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com