similar to: Re; Multihomed DHCP and PXE?

I am having a problem while trying to download anything from a recently configured tftp boot server. Here are the configuration for the dhcpd.conf option domain-name="domain.com"; default-lease-time 900; max-lease-time 1800; ddns-update-style none; authoritative; allow bootp; allow booting; option space PXE; option PXE.mtftp-ip code 1 = ip-address; option PXE.mtftp-cport code 2

I am not sure if anyone has done this but I am assuming it has been done before. Setting up a multihomed DHCP server accross multiple network blocks to issue PXE/BOOTP setup actions? Some background, I have successfully setup PXE to work with a cross over cable (first setup and testing env.), moved cient/server to switch and configured boot menu, images etc. and now after setting up the

There has been numerous threads etc regarding this but all that has left me is more than a little confused :-(. I have setup and environment consisting of two OpenVPN tunnels and wish to load balance at the packet level between them. I am currently running on Linux edm 2.4.21-20.EL.c0custom #2 Tue Oct 12 08:52:23 BST 2004 i686 i686 i386 GNU/Linux And have install Quagga at each end to provide

Hi: First - pxelinux works great - got it up and running with few problems. However - I ran into a snag, I am assuming I have a configuration issue. Here are the details. Using: syslinux-1.75 dhcp-3.0pl1 tftp-hpa-0.29 A lot of what I have done is from: http://frank.harvard.edu/~coldwell/diskless dhcpd.conf: # DHCP configuration file for DHCP ISC 3.0 ddns-update-style

Hi, We are using PXELinux 1.75, ISC DHCP 3.0pl1 and atftp-0.6 to deploy RH 7.3 across a number of Dell Rackmount systems. I would like to set things up so that the RH boot kernel grabs the IP Address, gateway aand DNS address from the first DHCP request with 'ipappend 1', but so far have had no success, Kickstart issue a seconed request after booting the kernel. Here are my configs:

is the share crossing mount points. if so you will need wide links set to yes -------- Original Message -------- Subject: Re: [Samba] reiserfs, samba, symlinks and windows (13-Mar-2008 16:34) From: jason.gerfen@scl.utah.edu To: damiend@mckennagroup.co.uk > I thought that as well at first but if I change the default share to > '/tmp' I am able to map the drive but I am NOT

Hi, I have refered to ur documents for creating a Diskless node in linux ,but could not get through the installation . The exact problem that i am facing is mention below , also, there r few queries, which i would be greatfull if u can answer First let me explain u what i have done . I am trying the configuration with one server machine and one client. server configuration 256mb ram AMD Athlon

On Wed, Mar 5, 2014 at 1:55 AM, Vieri <rentorbuy at yahoo.com> wrote: > Sorry for top-posting but my webmail forces me to. Odd. It's been a while since I used Yahoo but I didn't think I had that issue. GMail does default to top-posting but clicking the ellipsis to look at the previous email is enough. > I added -W to the APPEND line as suggested but I'm still getting

Hello. In my case I can successfully boot up my Thinkpad X32, but the same configuration doesn't work for my desktop computer with Intel network card, with Intel Boot Agent 2.2 DHCP server is 10.0.0.1, tftpd (used tftp-hpa) runs on 10.0.0.32. netstat told me the daemon listen to 69 UDP port just fine. running tftp in commandline also shows it works (retrieve pxelinux.0 less then 1 second).

Hello, i've found a strange bug, here is my situation: - all of our computers makes a pxeboot request by default dhcp server is configured: option option-128 code 128 = string; option option-129 code 129 = text; option space PXE; option PXE.mtftp-ip code 1 = ip-address; option PXE.mtftp-cport code 2 = unsigned integer 16; option PXE.mtftp-sport code 3 = unsigned

Hi- On the pxelinux web page here: http://syslinux.zytor.com/pxe.php Mr. Anvin says the following: " PXELINUX does not support MTFTP, and I have no immediate plans of doing so. It is of course possible to use MTFTP for the initial boot, if you have such a setup. MTFTP server setup is beyond the scope of this document. " I am curious as to the possibility of 'mtftp for the

Hiya, Just joined the list and started using pxelinux. Very cool product!!! I searched the, 8+ MB, archives looking for multicast entries. I know that the pxelinux page says that the support of mtftp in pxelinux isn't in the works but I'm not sure how old/relavant that comment is. I have noticied some comments from H.P.A. describing the difficulties in doing MTFTP. Are there any plans to

On Thu, Mar 6, 2014 at 11:20 AM, Jeffrey Hutzelman <jhutz at cmu.edu> wrote: > On Wed, 2014-03-05 at 13:18 -0500, Gene Cumm wrote: > >> Second, I notice the Altiris server specifies _3_ options of code 43, >> including one of length 253. The pack/unpack _should_ handle this but >> may split it differently. > > That's legal, and treated as if the values had

Sorry for top-posting but my webmail forces me to. I added -W to the APPEND line as suggested but I'm still getting the same result: Booting... Altiris, inc. X86PC PreBoot, PXE-2.x Enhanced Build ID=402 PXEPreZero: Invalid PXE Server list format. and the client PC freezes right there. Here's the full content of my dhcp.conf: max-lease-time 86400; ddns-update-style interim;

Hello all, I must admit that I am new to the Linux/PXE world, and so, am still learning a lot. I am currently in the 2nd semester of a senior project at Weber State University in Utah, trying like mad to get a diskless Beowulf Cluster up and running. I was given a grant to purchase 4 nodes running this equipment: Pentium D dual core Processor MSI 965 Motherboard Intel Pro/1000 GT PCI adapter

Hi, I would like to chainload syslinux 3.86 after booting from pxelinux of syslinux 6.04 is it possible? I was checking chain.c32, but i was not very successful so far. on my tftproot? dir i has this: pxelinux.0 boot/isolinux/ pxelinux.cfg/ isolinux_3.86/pxelinux.0 isolinux_3.86/boot/isolinux/ isolinux_3.86/pxelinux.cfg/ Does anyone know how i can, after booting from the tftproot pxelinux.0

Dear all, Inside the "HowTos/PXE/Gparted_PXE" wiki document, the "tftproot" directory should be "tftpboot", and the hyphens could be removed in the following line: Add the following lines to the pxelinux-configuration-file (/tftproot/pxelinux.cfg/default by default) Regards, Timothy Lee

Gene, I found a document from IBM that explains why it didn't like Vendor-Class-Identifier option I was using "PXEClient" was causing EFI boot rooms to dummy spit, that's very useful, that combined with RTFMing the PXE specs 3.0-3.2 might solve my problem if I keep at it. http://www-01.ibm.com/support/docview.wss?uid=swg21247032 Even the PXELinux docs suggest encapsulating

On Wed, 2014-03-05 at 13:18 -0500, Gene Cumm wrote: > Second, I notice the Altiris server specifies _3_ options of code 43, > including one of length 253. The pack/unpack _should_ handle this but > may split it differently. That's legal, and treated as if the values had been concatenated. See RFC2131, section 4.1, and particularly the second paragraph on page 24. Unfortunately, a

Ady: You seem to be taking (copy$paste) parts and pieces from different resources. Luke: Nope. The configuration works fine with PXE 2.01 clients, it's the UEFI PXE 3.2 that is having issues with the dhcp requests. The gospel is the Intel PXE 3 spec I'm RTFMing now. No copy and paste, I just started with someone elses configuration file that claims to support UEFI - or at least hopes to