similar to: tftp file permission

I've been working with Matt Burgess here on this problem, and have found the following: syslinux 3.08-pre10 ? broken >>> config.inc:max_cmd_len=255 syslinux 3.08-pre11 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.08 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.09-pre1 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.09-pre2 ? broken

I've got an interesting problem. I just recently upgraded an asterisk server from a may 9th cvs to a 9/29 cvs. When I did the upgrade I was unable to place calls through the PRI. The calls would process fine, but the provider would reject the call and send me a cause 69 or 77 failure code "Unallocated (unassigned) number". Upon contacting the provider, they told me I was

I used pxelinux.0 to boot my kernel, then the kernel began to boot. However, it cannot mount nfs root. I checked the nfs root is exported OK! The last screen is as followed: serial sub-system self-test: passed. internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/dri ver/eepro100.html

Hi, I have samba-3.0.28a crosscompiled and running on a MIPS platform. The development system has about 150MB of free RAM after system bootup and no swap space. The system also has an USB interface, to which an external USB hard disk is connected. When I try to transfer huge files above (100MB) from a client on to the USB hard disk, I find that the page cache eats up almost about 100MB and

Hello Tom, Monday, February 10, 2003, 2:35:45 AM, you wrote: TE> In the future, PLEASE POST PROBLEM REPORTS TO THE MAILING TE> LIST!!!!!!!!!!!!!!!!!!!!!!!!!!! TE> --On Monday, February 10, 2003 1:51 AM +0530 Srinivasa R Kotu TE> <kotu@ocimumbio.com> wrote: >> masq file >> >># interface subnet address >> eth1:0.0.0.0/0 192.168.1.0

hi Srinivasa Battula I about rsync with Windows ACL - can Iget this? -------------- next part -------------- HTML attachment scrubbed and removed

Hi all I want some information regarding mirroring. When mirroring from a rsync enabled site what internally happend?. mirroring is simillar to backup?. I want to know what is the difference between mirroring the batabase and backup the databse. plz help me regarding that. Thanx in advance. Regards Srinivasa Rao NatureSoft Pvt. Ltd. 11-20, 2nd Lane, Appu street, Mylapore,

Hi, I am trying to upgrade frm INTERNAL DNS to BIND_DLZ. I followed the procedure given in https://wiki.samba.org/index.php/Changing_the_DNS_Back_End_of_a_Samba_AD_DC and https://wiki.samba.org/index.php/BIND9_DLZ_DNS_Back_End. When I start the BIND Service, it fails with an error. In journalctl -xe we come to know that named service is unbale to open dlz_bind9_9.so file. Full error message

Srinivasa, I am looking for your updated version of rsync which supports acls - where could I download it? Chris Diphoorn Network Administrator (MCSE) Intouch - a Division of P.Q. Lifestyles Ltd Level 11, 301 Coronation Drive, Milton , QLD 4064 Tel: 61-7-3858 6400 Fax: 61-7-3858 6411 Email: chris.diphoorn@intouchdirect.com.au <mailto:chris.diphoorn@intouchdirect.com.au> Visit us

Hello Team, I have a problem with Samba domain controller with Windows 7. I am able to join the windows machine to Domain, but when I try to login with my OpenLDAP user name and password I used to get trust relation ship error message and unbale to login to Domain. For the work around I edited registry and changed the group policy after restart the machine I used to login to the domain. Is

Regards from Spain. Sorry if my english it's not good enough. I'm bad at it. I'm an user of the Soundhound recognition music for Android. Due to a problem with my smartphone I lost the normal function of it and I had to reinstall the system. After that I can't access the files that that app stores until the ability to connect to the Internet. But I still have the files. I was

Good morning. I am using samba 3.0 on RedHat Linux 9.0 and Linux machine is having lot of users and groups . I am trying to solve a problem. I have created, for example, 10 shares ( each share is having different valid users and groups ) and I can access only 4 of them (I have rights to read or write only for 4 shares). Well, is it possible to hide to my browsing the 6 shares that I can not

Hi, I try to compile speex for ARM. I follow the README.arm and i always have the same errors : make[2]: entrant dans le r?pertoire ? /usr/src/linphone/arm/speex-1.1.6/src ? source='speexenc.c' object='speexenc.o' libtool=no \ depfile='.deps/speexenc.Po' tmpdepfile='.deps/speexenc.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ arm-linux-gcc

On 10/16/06, Chris Diphoorn <chris.diphoorn@intouchdirect.com.au> wrote: > Can you help? Rsync's support for Windows ACLs is limited. What are you trying to do? Copy files from Windows to Windows, preserving Windows ACLs? If so, you might be better off using rsync to copy the files and another tool to copy the ACLs. Since rsync is meant first and foremost for Unix-like systems,

Hi Koen, The process to build llvm-gcc as a crosscompiler is basically the same as build a normal gcc as crosscompiler. The differences: you need a LLVM installed (compiled for the host). You must configure llvm-gcc with --enable-llvm. Problems: - Today LLVM supports ARM/EABI, but llvm-gcc don't. You must apply the patch:

Hi, I am having a problem in configuring my machine to use shorewall. Here is my setup Operating System : Mandrake Network Firewall Linux based on Mandrake Linux 8.2 Network Connection : eth0 Connecting to my internal LAN with IP 192.168.1.9 eth1 Connecting to my cable modem with a static IP address 202.88.191.31 When i start with shorewall not configured to

i am getting this compilation error: gcc -c -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wold-style-definition -Wmissing-format-attribute -DHAVE_CONFIG_H -I. -I. -I../../llvm-gcc-4.2-2.7.source/gcc -I../../llvm-gcc-4.2-2.7.source/gcc/.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Anton Korobeynikov schreef: > Hello, Koen. > >> So my question is: How should I build llvm and llvm-gcc4 to have it cross-compile from x86 >> to ARM/EABI? > Well, just supply appropriate --host/--target options to configure. To llvm or llvm-gcc4? > I haven't tried ARM, but this definitely works for crosscompiling from

Dear community, I'd like to fix a mixed model. I have unbalance data, what should i use: lme in nlme package , or lmer in lme4. Thanks, user at host.com as user at host.com -- View this message in context: http://r.789695.n4.nabble.com/lme-or-lmer-for-unbalance-data-tp4608425.html Sent from the R help mailing list archive at Nabble.com.

You need to configure with --enable-llvm. (It would still be nice if V1DI_pointer_node was defined; I'll take a look at that.) On May 20, 2010, at 1:04 PM, Anatoly Yakovenko wrote: > i am getting this compilation error: > > > gcc -c -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall > -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic >