similar to: MSCDEX over NDIS ethernet

I have a 32MB HD image that I can pxelinux.0/memdisk boot without issue. I would like to both memdisk and my image on a CD and then boot from the CD with pxelinux.0. Is this possible? If so how? Thanks.

I downloaded the 'seatools for DOS' diskette creator on seagate website. it's a windows program that creates the diskette; so a floppy disk must be present in the drive. running the program is ok, but creating the diskette fails, it says "the current diskette format not valid". while the diskette is blank, vfat, mounted and linked to a: in wine; so everything seems to be ok.

Mr Anvin, is there a specific loading address used with the Syslinux bootsector (to load ldlinux.sys)? like msdos 0x70, freedos 0x60 we're trying to have a SYS program that can create bootsector for other OS's than FreeDOS only. not much luck though :( this way I'm trying to avoid the use of syslinux.exe/com (need the diskspace that it would save by not including this program) I

I am planning to release SYSLINUX 2.08 in the next day or so; basically 2.08-pre9 without any further changes. So, I would appreciate any and all testers for this... -hpa

All - desperate plea for help here. Overview Centos 4.5 Kernel 2.6.9.55.0.9.EL with source dell Latitude 810 Im totally at my wits end... Ive tried like mad to get ndiswrapper to work for my lynksys WPC54GS wireless card. No matter what I try ndis gives some kind of error on installing the module after about a dozen attempts 8 kernels, and 5 days- I finally GAVE UP! unreal So, I

Did find a solution to this? I am getting the same relocation errors. It seems rather odd that the relocation errors should refer to the directory that ndis is built in, rather than the one it is installed in. That doesn''t make sense, does it? Brian Utterback This message posted from opensolaris.org

I found the 3Com one, but I'm looking for the intel one. The PXE PDK doesn't have it anymore, and the intel site points me to the proboot.exe archive, which has no *.dos files in it. Does anyone know of other generic drivers for dos that work with memdisk's keeppxe option?

I am trying to build FreeBSD update, STABLE branch, and buildkernel apparently snagged on ndis, which I don't want to do without. According to "man ndis", I need in kernel config options NDISAPI device ndis device wlan which I have: device wlan # 802.11 support options NDISAPI # This is in the hope of enabling Hiro USB wireless adapter device

Hi, I want to use PXELINUX to load a DOS disk image which I currently use for Win2K/XP unattended installs. I want to move away from reliance on specific NDIS2 drivers and use the 3Com UNDIS3C driver instead. I have used this successfully to start the MSClient, but the problem is that the UNDI and PXE layer take about 90K of base memory, which means that WINNT.EXE has insufficent memory to run

Hi there, I am using memdisk with pxelinux, i have created ms-dos boot disk from windows xp, but when i boot from it stops on starting.... what is the problem can anybody tell me.. Regards, Yogesh

Hi: Thank you very much for creating this very useful program. I downloaded the DOS version because there was a suggestion in th isolinux website. I was not able to detect the cd-rom on my pentium II computer with Award BIOS 4.51 v 1.10. I tried to set the IDE i/o address but I am not sure where to get the i/o address information. I used the i/o address in the Win98 device manager IDE

perhaps the boot-from-cdrom code in Smart Boot Manager? Bernd >>> No, since booting from CD-ROM requires that the El Torito part of the BIOS is activated, which it won't be if it didn't boot from CD-ROM in the first place. ---------------------------------------------------------------- Op deze e-mail zijn de volgende voorwaarden van toepassing:

Does SYSLINUX have any idea which DOS driveletter would be assigned to the disk it is booting from? At www.veder.com someone is trying to build a USB flash drive. However, FreeDOS does not seem to boot correctly from it (bootsector trouble maybe, or kernel itself is confusing drives), thus we're thinking of using Syslinux + Memdisk + bootimage, but somehow we want to be able to also access the

Hallo, I try to boot the windows 98 bootdisk via memdisk. It doesn't work completely. Booting a freedos FD image works, booting the windows 98 image works too. But the windows 98 boot disk then should extract the file "ebd.cab" with the file "extract.com", and that step fails. Is that a syslinux problem or a windows problem? Viele Gruesse! Helmut

Hi All, I have successfully configure the PXE and its working fine, the problem is that after timeout in the following msg Automatic boot in # second the screen stuck/hang there showing the above message or the menu if we choose to selection from menu until image is loaded from network. So, is there any way we can display another message after timeout. I tried MENU CLEAR and SAY Loading

This is a resubmission of my patch sent Jun 18, 2011 since it does not seem it was accepted. Please let me know if I am doing something wrong in how I am submitting this patch. Thank you. The below patch will swap order of sectors/track with bytes/sector to match diskette parameter table order (as pointed to by INT 1Eh). References: (additional ones available if necessary) 'System BIOS for

Hello all, I've been following this project with interest, and have had great fun implementing Isolinux within the FreeDOS cdrom distribution. Since I'm not that an expert at Linux, I would like to know how I can *succesfully* generate a bootable image from a partition. Situation is like this: (640MB RAM on system) 60GB IDE harddisk, primary partition 1 win98 500MB extended partition

I have periodically been trying to get memdisk to boot images larger than your average 1.44Mb floppy and have always been unsuccessful. I cannot boot anything greater than 1.44Mb. The systems I'm attempting to do this with are not too old but they are not recent either. One is a Asus P5A and the other is a Intel SE440BX both with the most recent bios firmware patches available applied. If

I have found something called: diskboot.img at: http://www.gtlib.gatech.edu/pub/centos/4/os/i386/images/ But it is 6Mb large (6411Kb) instead of 1411Kb And the rawreadwrirewin program gets an error on it when run on NT. On Win2000, it makes a diskette that fails to boot.. So really, HELP!!!! I 'just' discovered that my old bootable diskette is for Centos 3.0, and my other CDs are

I'm trying to use this universal DOS TCP/IP boot disk available here: http://members.iinet.net.au/~bdriver/bootdisk/ It requires an MS-DOS formatted disk created by Windows XP. It works great as a floppy but doesn't boot at all with memdisk. The problem can be simplified down to just the XP boot disk. If you make an MS-DOS startup disk with XP on a floppy, dd the floppy to an image