similar to: SYSLINUX 3.10-pre11

I've been working with Matt Burgess here on this problem, and have found the following: syslinux 3.08-pre10 ? broken >>> config.inc:max_cmd_len=255 syslinux 3.08-pre11 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.08 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.09-pre1 ? works >>> config.inc:max_cmd_len=1023 syslinux 3.09-pre2 ? broken

Changes in 3.10: * gcc 4.0.1 compilation fixes. * Add support for querying the PCI BIOS in libcom32 (used by ethersel et al.) * Fix PCI handing (ethersel etc) on several old chipsets (and VMWare.) * Try to deal with systems with broken EBIOS. * New API call to do "localboot". * New API call to query features.

Hi, I have tried several different line options, but I cannot seem to get the pxe master password option to work? I have basically tried all combinations of: DEFAULT local PROMPT 0 ALLOWOPTIONS 1 TIMEOUT 500 MENU TITLE sometitle MENU MASTER PASSWD somepassword But just can't seem to get the menu to prompt for a password. version I have is pxe 3.31 Thanks for any help

Hi, I am trying the simple menu passswd in syslinux 3.11, and it seems that if I set the timeout option, the menu passwd is ignored. For example: ----------- default menu.c32 timeout 70 prompt 0 noescape 1 MENU MARGIN 5 MENU MASTER PASSWD $4$x$03NXHMe7QS0Ukxlkyh684LkWdqY$ label local MENU DEFAULT # MENU HIDE MENU LABEL Local operating system (if available) MENU PASSWD localboot 0 label

I just picked up 3.10-pre15 and the "PXELINUX corrupts graphic filename referenced from DISPLAY file" bug is zapped. Yipee! Thanks hpa. And Arwin too, if that 'xor esi,esi' was the crux. However, LOCALBOOT -1 and LOCALBOOT 0 don't work the same as they did for me in 3.07. :-( 3.07: LOCALBOOT -1 apears to work as I have a hard disk listed in bios boot order after the

Hi all, wasnt sure whether this was the best place to put this information; but something seems to have gone 'backwards' in the later pre-releases of 6.03 regarding network booting. below are results of me testing - i did each a few times to make sure they are valid results. hope it helps identify something that's gone awry ? so far, 6.03 pre11 and pre13 (excluding efi32) seem most

Hi, I have been using 6.03-pre11 lpxelinux.0 to deliver standard (TFTP) and HTTP based vmlinuz and kernel images. Things are working fine. When I upgraded the same to 6.03-pre12 it stopped working. On the console of the machine that is booting, is stalls infinitely at the line: PXELINUX 6.03 lwIP 6.03-pre12 Copyright (C) 1994-2014 H. Peter Anvin et al Screen shot attached. FWIW: 1. the

I am hoping for some advice regarding another index problem. The code below is intended to assign a value of 'V' if values on certain variables are >= 1, assign a value of 'N' if values on certain variables are >= 1 on other variables and assign a 'O' if values on any variable which have a value <= 0. The outcome of this code is to assign a single

> More context to this: syslinux_run_command calls into load_kernel(), and somewhere behind load_kernel things break. This is also broken at the boot: console prompt. Any commands executed at the boot: prompt also lose all parameters. > > > With the latest 6.03pre I'm seeing an issue where no parameters are passed to the image executed via syslinux_run_command(). > > An

> > Thanks Ady, you were spot on, and I should have tested that scenario! > I narrowed the issue down to a line in my config: > > > ALLOWEDOPTIONS 0 > > > The comment next to it in my config indicates this was added to > disallow users dropping to the console with Escape or Tab, a > restriction I would like to keep. BUT, when this is set whichsys >

> Message: 3 > Date: Fri, 06 Jun 2014 08:13:36 -0700 > From: "H. Peter Anvin" <hpa at zytor.com> > To: Andrew Rae <A.M.Rae at leeds.ac.uk>, "'syslinux at zytor.com'" > <syslinux at zytor.com> > Subject: Re: [syslinux] EFI booting over network - can't then load > anything > Message-ID: <5391DAA0.2050207 at

Initial comments about 5.00-pre11. 1_ Using ctrl+v at the boot prompt: SYSLINUX 5.00 5.00-pre11CHS Copyright ... Initial copyright notice when booting to Syslinux prompt: SYSLINUX 5.00 CHS 5.00-pre11 Copyright ... Request: make the ctrl+v result to be shown as the initial copyright notice (including order and space characters). 2_ Hello.c32 is still behaving differently than in 4.06.

Hi, I'm facing some problems with pxelinux. I have ingetrated it into WDS server. I want to use Network boot all way possible. I want to add Hiren boot disk and NT password editor tools. Is this possible? Currently my network boot includes WDS, Linux install, Win98 Startup disk and ghost 11.5 wPS-DOS. My conf file as follows(*) Also in hyperv virtual machines(x64) pxelinux.com displays

Im trying to use newer simple-menu features, and have found that the following config-file (closely based on wiki pxelinux example) - fails for 3.62-pre11, - works for 3.62-pre10 where 'working' is successive reloads such that re-edits of file are seen on next reload and broken is issuing this error: Initial menu has no LABEL entries! boot: #>

Hello, I'm experiencing an issue where if I use vesamenu.c32 with PXELINUX 6.03 when network booting a virtual machine hosted on VMware ESXi 6.0, it hangs (the version message is printed and then nothing - the VM has to be powered off and back on again). This happens no matter if I choose the E1000 network interface or the VMXNET3 network interface when creating the VM. The same problem

Hi, I've just pushed out a last -pre release before 4.06 final. The purpose of this prerelease was to make sure that all the build infrastructure is configured correctly and to ensure that the win installer problem is now gone (I've done the build on an F16 machine which should have a working mingw toolchain). Barring any major problems I'll do the final release this week. -- Matt

I am having difficulty trying to figure out how to get a computer to boot from it's local disk automatically after the pxe menu times out. I installed syslinux-3.11-4 with yum onto CentOS 5.5 It boots to the local disk if I select Local from the menu and press enter but it never times out and boots localy. The AUTOBOOT message doesn't appear either. Which instructions in the PXELINUX

Why would I get the following error: Reading ZFS config: done. Mounting ZFS filesystems: (1/6)cannot mount ''/data/apache'': directory is not empty (6/6) svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: exit status 1 And yes, there is data in the /data/apache file system....... This was created during the jumpstart process. Thanks --------------

I''ve just uploaded 0.9.11-pre12 of the GPL PV drivers for Windows. Since -pre10 (and -pre11) I''ve fixed a heap of crashes that were plaguing xennet under load, and also rewritten the interrupt/event distribution logic to improve performance. Under windows 2003 I can now get network speeds of 1-2Gbit/second TX and 600Gbit/second RX, which is considerably better than I was

I''ve just uploaded 0.9.11-pre12 of the GPL PV drivers for Windows. Since -pre10 (and -pre11) I''ve fixed a heap of crashes that were plaguing xennet under load, and also rewritten the interrupt/event distribution logic to improve performance. Under windows 2003 I can now get network speeds of 1-2Gbit/second TX and 600Gbit/second RX, which is considerably better than I was