similar to: AW: AW: AW: flashing bios & memdisk

> No. Big real mode is not real mode, and in particular > MEMDISK doesn't have the control over what mode transitions > the world outside MEMDISK performs. i understand. if only dos will be used (without himem, emm386 or something like that) that the cpu will be leaved in real mode, is that correct? and e.g. bios update would work... mfg johannes

hi, i've seen that there already have been some messages to bios flash via memdisk image. i also had some problem with that. the programmer of "UNIFLASH" told me, that memdisk is using protected mode and this should be a problem, because uniflash only works with real mode. i've found i amiflash that works with protected mode and with this i can flash the bios. [with memdisk]

H. Peter Anvin, The following problem came to my attention with memdisk. I cannot claim the credit, but wanted to be sure the information made it back into the program for the benefit of all users... In file memdisk.asm, in respect of the operation of the raw and bigraw options, the order of pop instructions does not correspond to the order registers are pushed;

Hi, bit of a newbie if I'm honest but was wondering if issue mentioned here: http://syslinux.zytor.com/archives/2006-October/007586.html was ever fixed? basically I have the same issue with the same machine. I have 4 different types of PC's here that i'm trying to boot by USB stick. It works fine on 3 of them, but on the 4th, A HP/Compaq dx2200 MT, memdisk will not boot the .ima

Has anyone had a problem with afud408 (Award flash program) freezing the system when ran from memdisk? The freeze occurs when just running afud408 (not attempting to update bios, although it freezes then as well.) I was using pxelinux/memdisk 3.36, I upgrade to 3.51, and also fell back to 2.11 all have the same issue. I have tried all the switches for memdisk that I saw posted on the memdisk

Hi, I'm trying to boot Feature Tool 2.08 (free download from http://www.hitachigst.com/hdd/support/download.htm) from a pen drive via memdisk. QEMU can boot the pen drive all right, my ThinkPad can't: Loading ftool208.img.........................ready. MEMDISK 3.53 2007-11-17 Copyright 2001-2007 H. Peter Anvin e820: 0000000000000000 000000000009f000 1 e820: 000000000009f000

Hello list, I had to boot a Dell Diagnostic Disk today, and tried doing this via memdisk - which was when I noticed memdisk isn't working for me at all, neither from pxelinux nor syslinux. After trying around with 'raw', 'bigraw' and the like I noticed it doesn't even do anything when just using: LABEL diag KERNEL memdisk .. when I try that: boot: diag nothing

I'm new to memdisk and I wanted to have multiple floppy boot images on my USB key, I installed GRUB2 as the boot loader and have memdisk in /syslinux and my images in /image, I first tried booting normal images, memtest86+ works, my linux kernel work and they boot perfectly. Now using memdisk, I tried booting Spinrite which uses FreeDOS, it booted fine with no argument them frozen at querying

hpa, Seeing your post about 3.71, I wanted to get a message out even though I don't have the stats right now. I am having a problem with memdisk with a lot of shuttle computers, but also affects a variety of other hardware (low though, 5%? less?). The image that I can most reliably test against is the Hitachi Drive fitness Test.

Hi list! I'm trying to make a hd image with can boot from memdisk over PXE. So this is what i did: - Created a new VM [VMware] -Installed DOS on a 100MB HD from a floppy -bootet Linux over PXE [DamnSmallLinux] -in terminal: dd if=/dev/hda of=dos.img This image [dos.img] isn't working! Memdisk loads the Image and boots the HD! The error message is something like this: I/O Device

Hi. I'm working on replacing a PXELINUX/MEMDISK loaded DOS based installation image with a PXELINUX/MEMDISK loaded WinPE ISO image. So far everything seems to work well (appending "bigraw" to memdisk solved booting problems on several machines), but I kind of miss the option of using getargs.com to get/set environment variables from the memdisk command line. Is there any way to

hi, i've tested with 2 version of awdflash and uniflash: here the results: it only worked with freedos, not with win98 dos; with win98 the images were not bootable; but that does not matter; freedos is ok. awdflash 8.27.45: flash ok awdflash 8.27.41 (uses protected mode): flash ok uniflash 1.40: when starting flashing the program freeze. awdflash 8.27.45 never worked before so i think this

For the boot floppy at http://superkeen.com/peacecorpsfiles/FUZOMA14.IMG using memdisk from syslinux version 3.72 boots correctly, but for memdisk versions newer than 3.72 (I tested 3.73, 3.75, 3.85, and 3.86) all hang at boot with the following message: Loading boot sector... booting FreeDOS kernel - SVN (build 2039 OEM:0xfd [compiled Oct 2 2009]) Kernel compatibility 6.22 - BORLANDC ... XMGR,

hi, i want to load a small linux system with memdisk and when the linux system is started i want to mount the memdisk-image. is this possible? if yes: how can i mount it? when i try to mount /dev/fd0 it accesses to my floppy drive. bye, johannes (jaf) _____________________________________ Varium et mutabile femina semper est!

This isn't an esp urgent issue, but I'd like to use a certain RAM diagnostic (Doc Mem) which I've already posted a note about a couple of months ago. Simply won't work booting the floppy disk image via MEMDISK. In the interim, I've tried to resolve this by changing things on my side. I'm pretty sure it's a XMS incompatibility, as it fails differently depending on

Hi, Thanks a lot for the great tools at syslinux. I have an interesting problem for which i am trying to use memdisk. I have a cluster of 40 machines (same hardware config) all needing a bios flash. Rather than doing it manually, i am trying to use the PXE mode. So i am using memdisk to boot an image of my bios flash floppy over the network. my platform configuration is supermicro motherboards

We are working on a prototype for an installation system, and it would be very useful if we could load two memdisk images, having one pretend to be normal A: drive, and another as B: drive. I have read through the docs as well as done some google searches, and haven't seen such a thing described. We have one person who has asm programming experience, and we were wondering if we could get

Hi Shao Miller, I found another ISO that doesn't work with MEMDISK-ISO. It is the ISO of the PloP bootmanager. It is a ISO which uses floppy emulation. When I boot it with MEMDISK-ISO (run from Syslinux), my PC instantly reboots. When I extract the floppy image from the ISO and boot this file with MEMDISK, it works fine. Grub4dos iso emulation works fine for this iso. When using Grub4dos

Hi guys, I'm trying boot a floppy basead netbootdisk solution ( http://www.netbootdisk.com/) using grub and memdisk. This is a Floppy 1.44 Mb with TCP/IP and Ethernet Drivers for DOS. This image doesn't has a command.com. This file is unzipped on boot. Using a floppy, the machine boots, but when I trying to use a image from floppy which memdisk, the boots hangs. The image can found at

Hello all. Again I call upon the greats of this mailing list to help me with an issue related to MEMDISK - notably when paired with various Dell OptiPlex and Latitude systems. The issue presented itself sometime ago and I best dealt with it by remaining with version 3.83 of the SYSLINUX package. But valuing the improved changes fostered by newer versions, I would prefer to move forward with