similar to: about making syslinux boot from hard disk drive question

I have been trying to find the information by searching through the archives and google, so I am sorry if this question has been asked before I just have not been able to find an answer. I have a syslinux boot floppy which loads to the boot prompt, I wish to load a .gz image which is on my hd0 0 by using memdisk as the kernel. I have tried to kernel memdisk append root=/dev/hd0 0 (also just

>-----Original Message----- >From: xen-users-bounces@lists.xensource.com >[mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Liang Yang >Sent: 2006年9月19日 8:36 >To: xen-users@lists.xensource.com >Subject: [Xen-users] How to configure VBD hard disk drives in Linux >HVMdomain? >how to do it in the config file? Your config is partly right. But it also needs a Qemu

Hello, We have been using syslinux to boot machines successfully for quite a while. However, we now have a model of machine that just doesnt seem to work. We are currently using syslinux/pxelinux 2.05 but have tried 2.03 as well Here is the procedure we normally use. This is typically fully unattended. We boot a small linux distro using pxelinux. Then we copy in mbr.bin from the syslinux

I have been succesful in using syslinux to boot from a hard drive, by dd'ing a Linux (LRP) image onto the drive and then running syslinux (i.e. dd if=the_image of=/dev/hda followed by a syslinux /dev/hda), however I'm having problems getting it to work from a partition on the hardrive. I'm trying to use syslinux on a small 100MB FAT16 partition (same commands as before, just

I am working in Centos5.5. Pen drive, hard disk, cd are not being recognised. During booting, "mounting local filesystems [failed]" is displayed among other errors which I am unable to see as the messages proceed fast. Are these messages stored in some file, so that I can check them and report all the errors that are displayed during booting. -------------- next part -------------- An

I've recently moved from pxegrub to pxelinux (well, syslinux...) for many benefits. (memory fingerprint, etc) Its running perfectly, and exactly how I like it, except. LOCALBOOT 0 DOES NOT actually mount and boot the hard drive. All it seems to be doing is actually return error to the BIOS, which then boots the next device in it's list. This isnt a problem on most systems, but on

Hi, I was wondering if it is possible to have the option to boot from hard disk when syslinux loads from floppy. Basicly I'm trying to create a boot disk which gives me the option to boot from hard disk, possibly after 5 seconds incase I leave the floppy in by mistake. The systems I would be using this floppy on would be running Windows NT 4.0, Windows 2000 and possibly RedHat Linux 7.2.

I couldn't find this information on your site for SysLinux, and I'm sorry to bother you with this, now, but I was wondering what format of hard disk images SysLinux supports. Is it a raw format, or a format like drive image or ghost. Thank you for your time, Joseph Baugher -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, First, I'd like to say that this is an extremely useful piece of software - thank-you very much! I am working with couple of schools in my area, and using pxelinux and syslinux for various things. I find the functionality of pxelinux's localboot option to be extremely useful - I force pxe boot, and then use pxelinux to let the user choose local boot or remote boot. This is

Hi all, Sorry if this question seems odd. Is it possible to use syslinux to boot from a regular hard disk? I know that's exactly what grub, lilo etc. are doing, but I would really like to utilize the comboot option of syslinux. Are there LBA limitations to such a setup? Shachar -- Shachar Shemesh Lingnu Open Source Consulting ltd. Have you backed up today's work?

Hi, Pascal wrote: > mkisofs -o core.iso -b boot/core.img -c boot/boot.cat -hard-disk-boot core/ > my iso image is ok with qemu on bios and uefi, Astounding. As CD-ROM this is not supposed to work with UEFI unless the firmware emulates BIOS. What particular UEFI firmware did you use ? > and with qemu as hard disk on uefi but not on bios. That's even more astounding. The UEFI

> hello every body, > > I'm trying to build an isohybrid image based on syslinux able to boot on > bios and uefi with optical disk or usb key. > > I've build a 16Mb hard disk image (core.img) with necessary parts for bios > (legacy bootable partition, protective mbr, gptmbr.bin & syslinux > installation) and for uefi (gpt, esp, /efi/boot/bootx64.efi &

> Hi, > > Ady wrote: > > the UEFI specs do state that the ESP is supposed > > to be set/used as no-emulation mode > > ... > > the UEFI specs should tolerate / accept this situation, rather than > < restricting the ESP to no-emulation mode. > > My criticism towards this UEFI implementation is that it probably cannot > serve as realistic test bed

2016-12-22 10:19 GMT+01:00 Thomas Schmitt via Syslinux <syslinux at zytor.com>: > Hi, > > Didier Spaier wrote: > > The issue is the inability of booting of a *physical* (not virtual) > optical > > media, like for instance a DVD or a CD, using syslinux.efi. > > Actually firmware cannot find any UEFI specified booting starting points > in an ISO 9660

Le 22/12/2016 ? 08:53, Pascal via Syslinux a ?crit : > when you say """ Unfortunately, syslinux.efi v.6.03 is not capable of > booting optical """, you talk about isolinux.bin ? > > because my iso image with a "good" alternate eltorito boot image (eg. "uefi > ready") is booting with qemu (qemu -cdrom core.iso -bios uefi.fd) and is

After formatting a floppy to MSDOS format and using syslinux /dev/fd0, I successfully installed ldlinux.sys to the root directory of the floppy. Then I created a syslinux.cfg under the root directtory of this floppy to load the linux kernel in my first hard disk, 3rd partition, boot folder. The file system of this partition is ext3. The floppy has a FAT file system. This config file is listed

Hi, Ady wrote: > [hard disk emulation boot image works with VirtualBox] For a reader of the UEFI specs this comes very unexpected. Together with the report of Pascal that a hard-disk-emulation works even with mkisofs option -b (i.e. Platform Id x86 BIOS) it appears that the UEFI implementation treats the El Torito boot image like the whole device, regardless of Platform Id. On (virtual)

2016-12-23 9:20 GMT+01:00 Thomas Schmitt via Syslinux <syslinux at zytor.com>: > Hi, > > Ady wrote: > > the UEFI specs do state that the ESP is supposed > > to be set/used as no-emulation mode > > ... > > the UEFI specs should tolerate / accept this situation, rather than > < restricting the ESP to no-emulation mode. > > My criticism towards this

Le mercredi 21 d?cembre 2016, Ady Ady via Syslinux <syslinux at zytor.com> a ?crit : > > > Hi, > > > > Pascal wrote: > > > mkisofs -o core.iso -b boot/core.img -c boot/boot.cat -hard-disk-boot > core/ > > > my iso image is ok with qemu on bios and uefi, > > > > Astounding. As CD-ROM this is not supposed to work with UEFI unless the >

This patch fixes few bugs when do hard readonly mount. see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322 Signed-off-by: Tiger Yang <tiger.yang at oracle.com> --- fs/ocfs2/dlmglue.c | 21 +++++++++++++++------ fs/ocfs2/super.c | 3 ++- 2 files changed, 17 insertions(+), 7 deletions(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 7642d7c..da103f5 100644