similar to: Can't get hpa-tftpd working on Slackware 9.1

Hello, we have two diskless machines in a routed network. Both get their IP adresse and tftp configuration via dhcp. When we start one machine all works well, when the second machine tries to download the kernel via tftp we get this error: Jul 8 09:49:52 voyager2 in.tftpd[8374]: RRQ from 10.63.5.122 filename /andreas/pxelinux.0 Jul 8 09:49:53 voyager2 in.tftpd[8374]: tftpd: read: Connection

I''ve been poking around my system, and realized that having a tftp server would be handy. (I''m working with cisco routers, which have the capability to up and download configuration images via tftp.) However, I''m not content with the usual tftpd that comes with Linux. The whole "specify each directory you want" scheme is cock-eyed to me. I''d prefer

I have spent the last two hours on this issue. I think there's a problem with tftp-hpa. Setup: attempting to use Debian FAI, but there is definitely a problem with PXELINUX. pxelinux.0 is obviously being loaded by clients, but *nothing* in the pxelinux.cfg directory can be loaded. Clients sit and spin on their MAC files and when they get to default nothing happens. This is

hi, i try to get this tsize capable tftpd running, but it doesn't fork. (as read the strace output and the process table) strace: 9122 execve("/usr/sbin/in.tftpd", ["/usr/sbin/in.tftpd", "-u", "nobody", "-s", "/var/tftpboot/"], [/* 35 vars */]) = 0 9122 uname({sys="Linux", node="saturn", ...}) = 0 9122

If I omit --secure from the tftpd-hpa command line, I then need to e.g. `tftp -c get /var/lib/tftpboot/vmlinuz` instead of plain /vmlinuz, even though I pass /var/lib/tftpboot as the tftp dir in the tftpd-hpa command line. That essentially means that I'm exporting my whole /, which is clearly something I don't want to do. I basically want tftpd-hpa to serve files from /var/lib/tftpboot

Hello all, Tested on linux 2.6.18 (Centos5) and FreeBSD 7.0. You would execute it like below (which basically makes tftp reply back with same port is listening on ) tftpd --port-range 69:69 -4 -s /tftpboot/ --- tftp-hpa-0.49/tftpd/tftpd.c 2008-10-21 01:08:31.000000000 +0300 +++ tftp-hpa-0.49-tftpd-reuseport.c 2010-03-03 15:19:26.000000000 +0200 @@ -524,6 +524,11 @@ #ifndef __CYGWIN__

Hello, On my previous TFTP server I had logging. I did see all requests in logfiles. On my current TFTP server I have also added the options '-v -v -v', but nog logging. At least I can't find it them in /var/log/*/* Where does tftpd-hpa writes it's logging? Groeten Geert Stappers -- Leven en laten leven

Hello, Peter and others! there are some issues regarding the tftp-hpa server: 1. Running as Windows service seems to require that the application does not detach (otherwise "net start" says smth. like "could not start, the service didn't report any errors"). The attached patch adds the option "-n", which can be used to have tftpd run in foreground.

> Correct. Like most UDP-based inetd services, tftpd is intended to be run in 'wait' mode. When the first request arrives, inetd starts the service but does not read the incoming packet (it can't, because it has no way to pass it along to the server). After that, inetd ignores that socket until the server exits. This isn't critical for tftp, but it does help to keep down the

Hi, i try booting a PXE equipped client with pxelinux. The problem is: after receiving the file pxelinux.0 it requests pxelinux.cfg/C0A86451 and aborts. tcpdump: .... 16:01:58.786946 192.168.100.81.2073 > saturn.1337: udp 4 16:01:58.787033 saturn.1337 > 192.168.100.81.2073: udp 516 (DF) 16:01:58.787202 192.168.100.81.2073 > saturn.1337: udp 4 16:01:58.787528 saturn.1337 >

It seems that tftpd-hpa is more suitable at serving arbitrarily large files (greater than 65535 blocks long; with pxelinux.0 using a default block size of 1408 this is 92,273,280 bytes) as atftpd will complain in the log stating "Requested file to big, increase BLKSIZE". I saw that a while back HPA mentioned that atftpd was probably more scalable (number of clients) while tftpd-hpa is

I have tftp running on a computer. done with yum install tftp and yum install tftp-server. The computer has 2 network cards in it. Everything else on this computer is working fine. My tftp config is : # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration

Hello, This about remapping in the HPA tftp server. A client does request for '/tftpboot/ncd4/foo' which should be 'ncd4/foo' I have created a remap file that looks now like this: r tftpboot/ncd4/modshmx/login.hmx ncd4/modshmx/login.hmx r tftpboot/ncd4/modshmx/setup.hmx ncd4/modshmx/setup.hmx r tftpboot/ncd4/modshmx/term.hmx ncd4/modshmx/term.hmx Because r

Hopefully I'm not out to lunch here. I ported tftp-hpa to our proprietary OS, VOS (at stratus.com). We've always runs the old legacy tftpd from inetd, so I wanted to continue doing so with tftp-hpa. It seems to work okay, but I noticed that the code in tftpd.c has a 'while (1)' loop that has this at the end: /* * Now that we have read the request packet from

Hello, i've got a problem on lenny with tftpd-hpa When i launch it from /etc/init.d/tftpd-hpa start, there is no pidfile created. what is the way to get it ? thank you -- --------------------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ --------------------------------------------------------------- 1, place Roger Joly 28000 Chartres

AI_CANONNAME is only relevant when the resulting official name is used, which is not the case in tftpd for the address to bind to. Also AI_ADDRCONFIG isn't helpful. This flag is good for sockets used to connect(2) somewhere. But for listening sockets it makes tftpd fail to start when -a 0.0.0.0:69 is passed and no network device is up yet. This addresses Debian bug

I configure the system of remote boot. Almost all was done. But one simple problem. tftp doesn't download pxelinux.0 from boot-server, in.tftpd is running at. Problem isn't in pxelinux.0, but in protocol itself. I've created test file "test" in /tftpboot and tried to download it but "Timeout occured". From /var/log/messages: Mar 27 16:32:27 dk in.tftpd[26576]:

Take 2 at bouncing this to the rest of the original recipients through a different MTA, since mail.zytor.com refused to accept it the first time. Please re-add Jason Gunthorpe <jgg at obsidianresearch.com> and 793921 at bugs.debian.org to the CC for replies. On Wed, Jul 29, 2015 at 05:34:00PM +0930, Ron wrote: > > Hi Jason, > > On Tue, Jul 28, 2015 at 03:45:30PM -0600, Jason

Hi I'm working on an update of the openbsd tftpd, mainly to support RFC 2349 (tsize option; and 2347-2348 too). In fact, i backport from tftp-hpa (which came from an old openbsd cvs). I know, i can use tftp-hpa but first it doesn't compile on openbsd, second, i hope the backport could be include in openbsd cvs ... does someone know a tftp client or a test to really know what is good or

Hi, I have a weirdness with tftpd-hpa, it seems to report a wrong date in the syslog (2 hours early): root at sup01 > tail -f /var/log/syslog Oct 16 11:26:52 sup01 last message repeated 11 times Oct 16 11:28:06 sup01 ucd-snmp[425]: Connection from 62.210.191.157 Oct 16 09:28:33 sup01 in.tftpd[14495]: RRQ from 10.8.1.222 filename update.cfg Oct 16 11:30:01 sup01 /USR/SBIN/CRON[14521]: (root)