similar to: Trying to work around a 0.99h client.

Hi I have searched the site, list archives, google etc and have not been able to find an appropriate answer so I am asking it here. Apologies if this has been answered already. I have a kiosk-style pc which I wish to remote boot to keep it quiet. This way I don't need a hard disk at all, keeping it truly silent as it has a passive cpu cooler. Unfortunately, it has no upgrade options. I

Hey, I have a problem booting certain machines with pxelinux. I have pxelinux.0 in the root of my tftp server and dhcp pointing to the right location: # dhcpd.conf authoritative; option domain-name "example.net"; ddns-update-style none; default-lease-time 3600; max-lease-time 86400; subnet 10.0.0.0 netmask 255.255.255.0 { range 10.0.0.3 10.0.0.20; server-name

Hello list, We have a scenario where our TFTP server is not the same IP as our DHCP server. While testing with 6.03, our setup works just fine. However with the master branch, for some reason pxelinux.0 is fetched from the TFTP servers IP, but then it tries to load ldlinux.c32 from the DHCP servers IP. I've tracked down this problem to the following commit:

On 2015-09-12 04:58, Gene Cumm wrote: >> I've captured the following DHCP ACK: >> >> 10.141.20.1.bootps > 10.141.20.2.bootpc: [udp sum ok] BOOTP/DHCP, Reply, >> length 399, xid 0xf0eb955a, secs 14, Flags [none] (0x0000) >> Your-IP 10.141.20.2 >> Server-IP 10.141.255.254 >> Client-Ethernet-Address fa:16:3e:08:31:b9

Hello. In my case I can successfully boot up my Thinkpad X32, but the same configuration doesn't work for my desktop computer with Intel network card, with Intel Boot Agent 2.2 DHCP server is 10.0.0.1, tftpd (used tftp-hpa) runs on 10.0.0.32. netstat told me the daemon listen to 69 UDP port just fine. running tftp in commandline also shows it works (retrieve pxelinux.0 less then 1 second).

Hello ! I'm french, my english is bad :-( I want to boot a computer by network which have a 3Com network card. So I use isc-DHCP, TFTP-hpa and PXELinux. The computer start, make a dhcp request, receive the configuration. The next step is to contact the tftp server to get pxelinux.0 and the configuration. Stop me if I made an error ;) So, in the network I want to use it, there is a dhcp

I'm difficulty diagnosing a tftp-hpa problem. Specfically, when performing a PXE boot, the machine hangs at the "TFTP...." and times out. This is only occuring at one network location (we'll call it network A). Now on network B, the computers on network can tftp boot no problem. If I run a tftp client from my workstation to connect to the tftp-hpa server on network A, I can

On Sat, Sep 12, 2015 at 7:08 AM, Gene Cumm <gene.cumm at gmail.com> wrote: > On Sat, Sep 12, 2015 at 5:54 AM, Teun Docter > <teun.docter at brightcomputing.com> wrote: >> On 2015-09-12 04:58, Gene Cumm wrote: >>>> >>>> I've captured the following DHCP ACK: >>>> >>>> 10.141.20.1.bootps > 10.141.20.2.bootpc: [udp sum ok]

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

Hi, I am using a Windows Server 2012 R2 Hyper-V Generation 2 VM as a PXE client (no physical machines available). This is a UEFI VM, and as per instructions I've read I have disabled secure boot on this VM for the installation of Linux. I am using the latest tftp-hpa package with the following config: # /etc/default/tftpd-hpa TFTP_USERNAME="tftp"

Gene and co, Now my pxelinux efi 64 boot is properly loading syslinux.efi (via TFTP) It then issues a TFTP file request for efi.x64/pxelinux.cfg/ldlinux.e64. (All my efi x64 content is under efi.x64/pxelinux.cfg). However, I see that it fails to properly negotiate the TFTP options with my TFTP server. so it never transfers ldlinux.e64 over. In its file request packet, it asks for these TFTP

> Just set up ISC DHCP on fresh CentOS 7 install and followed the redhat > guide linked in this thread. > Did what I thought was correct and duplicated the OPs problem. > /me scratches head. . . off to `tcpdump -vv -nn -i ens192`. . . packets > never lie. . . > Vendor-Class Option 60, length 32: > "PXEClient:Arch:00007:UNDI:003000" > > d'oh; I

On Wed, Oct 07, 2015 at 07:21:28AM -0400, Gene Cumm via Syslinux wrote: > On Wed, Oct 7, 2015 at 6:40 AM, Clements, James via Syslinux > <syslinux at zytor.com> wrote: > > Hi, > > > > I am using a Windows Server 2012 R2 Hyper-V Generation 2 VM as a > > PXE client (no physical machines available). This is a UEFI VM, and > > as per instructions I've read

Been looking high and low for an option to request blksize in the hpa tftp client but I cant find one. How do I request a bigger blksize with the hpa tftp client? Jocke

On Sat, Sep 12, 2015 at 08:42:15AM -0400, Gene Cumm via Syslinux wrote: > On Sat, Sep 12, 2015 at 7:37 AM, Gene Cumm <gene.cumm at gmail.com> wrote: > > On Sat, Sep 12, 2015 at 7:08 AM, Gene Cumm <gene.cumm at gmail.com> wrote: > >> On Sat, Sep 12, 2015 at 5:54 AM, Teun Docter > >> <teun.docter at brightcomputing.com> wrote: > >>> On

Hi, I have a tftp client which loads quite happily from a tftpd built from netkit-tftp-0.16 but which fails to load from from a tftpd built from tftp-hpa 0.29. In both cases, tftpd was built from pristine sources and run from xinetd under Redhat 7.3. [netkit-tftp-0.16 is the ancestor of tftp-hpa, predating HPA's maintenance of same] [the tftp client also.. .. fails with the prebuilt tftpd

Odd problem here--I just got a couple of Cisco 7960s from Ebay that are not functioning as expected...... These 7960s can't seem to be unlocked for manual configuration via any mechanism that I can find. If you go to settings, there is no option 9 (unlock). Available options stop at 4 (Status). **# has no effect. The Phones report that thier current firmware version is 3.1 MF.G2.

On Fri, Jun 7, 2013 at 9:29 AM, Geert Stappers <stappers at stappers.nl> wrote: > Op 2013-06-07 om 06:18 schreef upen: > > On Fri, Jun 7, 2013 at 2:57 AM, Geert Stappers wrote: > > > Op 2013-06-07 om 09:35 schreef Geert Stappers: > > > > Op 2013-06-06 om 14:42 schreef H. Peter Anvin: > > > > > > > > The tcpdump[1] shows strang HTTP

Hello, I've got several machines which I'm trying to netboot, the setup is a bootserver using dhcpd3 and tftpd-hpa. When a machine boots up, it gets an ip address and downloads pxelinux.0 from the server, then it starts searching for pxelinux.cfg/[MACADDRESS] pxelinux.cfg/0A0000F0 and so on. On the server side I see in the syslog the client's DHCP-request and the client downloading

I'm trying to network-boot a GCT Allwell set-top box without success. My frustration level is high. The problem seems to be that the Allwell is sending a RRQ with an option. tftp-hpa responds with an OACK, and waits for the corresponding ACK from the Allwell. The Allwell never sends that ACK, but instead continues with the same RRQ until timeout. Having read RFC1782, this makes me think